Just add it throughout the Meross app. One of the first step of the wizard is the question « do you already have a hub installed », you skip the hub installation part and are good to go 😉
I have 2 of these but only can connect one at one to the hub ?!? Can't I connect 2 or more to the same hub ?? Using the MS200 with the mini hub MSH300I bought 2 of these, each with a hub but I want to use only 1 hub !!!
@@LaPalmeraie0032 every time I try to add one it replace the other as it always asks to scan the hub. I scan of course the same hub and not the second one.
@@LaPalmeraie0032 Sorry, I tried already 7 times. The first sensor ok, it asked to scan the code on the hub then to sync the sensor, inserting the pin and double click. Sensor one all ok. Then try to add the second sensor but it asked again to scan a code and as there is none on the sensor itself I need to scan the same hub and to the same proces what makes I now replace the first sensor with the second one but I do not get 2 different sensors :-( Do I need to buy the other setvof sensor without the included hub ?
@NeoVdV that’s not how it works and no it does definitely work with one hub. I have this at home. Use the Meross app to add the first hub and sensor. Then again use the Meross app, chose to add the sensor and in the step where it shows the steps to add the hub you have to skip this by clicking in the bottom « I already have a hub ». Then it makes the hub blink and you can simply add the second sensor by clicking with the pin. No need to scan a code.
Anybody could explain me how can I make this device sound in my phone? I receive a notification every time the door is open but it doesn't sound! What if I am sleeping?
Meross products usually are pretty good for me but not this door and window sensor. It can’t take the constant beating from a constantly used or slammed door - the battery shakes loose or it just constantly goes offline. I thought I got a defective unit so I sent it back for a replacement but same results with the new one. For my purposes, a motion sensor would be a better option.
Yes I think as well or use a fixed magnet instead of the official magnet that goes with the door sensor. This said… why would you slam a door that often ? 😄
🤑🤑 Get 25% off with my reduction code! : lapalmeraie25 🤑🤑 Support the channel and use this affiliate link to buy: shop.meross.com/products/meross-smart-door-and-window-sensor-kit-ms200hhk?ref=Dz6Fj_H48Lc9Zo
I asked several YTers. You win the prize. Thanks for the quick and helpful response.
Thank you so much! 😉
Ok, thx, I will try it once again else I need to send it back for can I add more sensors.
Look how i do this in my video 😉
How exactly do you add a second/third/etc sensor to an existing Hub?
Just add it throughout the Meross app. One of the first step of the wizard is the question « do you already have a hub installed », you skip the hub installation part and are good to go 😉
I have 2 of these but only can connect one at one to the hub ?!? Can't I connect 2 or more to the same hub ?? Using the MS200 with the mini hub MSH300I bought 2 of these, each with a hub but I want to use only 1 hub !!!
You can connect multiple devices to one hub, no problem. Do you get an error?
@@LaPalmeraie0032 every time I try to add one it replace the other as it always asks to scan the hub. I scan of course the same hub and not the second one.
You should skip that part. You can find it in the bottom of the screen 😉
@@LaPalmeraie0032 Sorry, I tried already 7 times. The first sensor ok, it asked to scan the code on the hub then to sync the sensor, inserting the pin and double click. Sensor one all ok. Then try to add the second sensor but it asked again to scan a code and as there is none on the sensor itself I need to scan the same hub and to the same proces what makes I now replace the first sensor with the second one but I do not get 2 different sensors :-(
Do I need to buy the other setvof sensor without the included hub ?
@NeoVdV that’s not how it works and no it does definitely work with one hub. I have this at home. Use the Meross app to add the first hub and sensor. Then again use the Meross app, chose to add the sensor and in the step where it shows the steps to add the hub you have to skip this by clicking in the bottom « I already have a hub ». Then it makes the hub blink and you can simply add the second sensor by clicking with the pin. No need to scan a code.
Anybody could explain me how can I make this device sound in my phone?
I receive a notification every time the door is open but it doesn't sound! What if I am sleeping?
Hello! Homekit notifications don’t make a lot of noise indeed but you could set up a shortcut to create this.
Thank you for your amazing review :)
You’re welcome 😉 😇
Meross products usually are pretty good for me but not this door and window sensor. It can’t take the constant beating from a constantly used or slammed door - the battery shakes loose or it just constantly goes offline. I thought I got a defective unit so I sent it back for a replacement but same results with the new one. For my purposes, a motion sensor would be a better option.
Yes I think as well or use a fixed magnet instead of the official magnet that goes with the door sensor. This said… why would you slam a door that often ? 😄
Anger issues, lol. Actually it's the laundry room/utility room door which isn't as solid and dampened like a regular door. @@LaPalmeraie0032
🤑🤑 Get 25% off with my reduction code! : lapalmeraie25 🤑🤑
Support the channel and use this affiliate link to buy:
shop.meross.com/products/meross-smart-door-and-window-sensor-kit-ms200hhk?ref=Dz6Fj_H48Lc9Zo
Using at home on entrance door and not working stable. I don't recommend.
Sorry to hear that. Here it really works correct. Try to contact the aftersales service. Maybe something is wrong?