How to Insulate a DIY Shed Time Lapse
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- How to Insulate a DIY Shed Time Lapse - See below for more DIY Shed Build videos and details about the construction of this DIY Shed Build (12X16) Tiny House.
Total shed build cost October 2021 (Not including insulation) was $3300 including the double 4'X12' lofts.
Loft build video here - • How to Build a Loft in...
Additional information about this 12'X16' DIY Shed Build
-The outside measurement of the floor base is 12' X 16'
-Treated 2"X6" floor joists 16" on center
-2"x4" wall studs are 16" on center
-The walls are 7' 6" from the floor to the top of the double top plate
-2"x6" DIY trusses are 24" on center with a 8/12 pitch
-The shed is sitting on three treated 4"X6"X16' runners on a bed of gravel
Building a DIY Shed With Basic Tools - • Building a DIY Shed / ...
DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE
/ @diyhomesteadprojectsd...
Top videos you need to see:
DIY Shed Build Roof Installation Time Lapse (12X16) Tiny House
• DIY Shed Build Roof In...
DIY Shed Floor Build Time Lapse (12X16) (Tiny House)
• DIY Shed Floor Build T...
How to Build Doors for Your Shed
• How to Build Doors for...
If you would like to help support my channel and use the WannaBFree Amazon affiliate link, I thank you in advance for your support. As an Amazon Associate I earn from qualifying purchases and no extra cost to you.
Nail gun used to build the DIY 12'x16' shed
amzn.to/3J7RRDx
WORKPRO 6 in 1 Staple Gun
amzn.to/3GNGKA0
Bostitch SB353/8-1M Heavy Duty Premium Staples
amzn.to/3zf0WsI
WannaBFree Amazon affiliate link
www.amazon.com...
Timestamp:
00:00 - Intro
Link to my other channel with lots of camper van and travel videos
www.youtube.co...
Check out all my DIY shed build videos here:
Building a DIY Shed With Basic Tools - th-cam.com/play/PLC_QVs9y_q3tAXy20aNUBBd79fsqD2QCk.html
Idk why but the sound from this video is very soothing to me.
This answered my question! I wondered about how to put insulation of the inside of a shed I've just purchased. Thank you for posting!
Very welcome! I wish you the best with your project!
Thank you for sharing.
Thanks for watching!
great... i'd personally use a mask & gloves working with a fiberglass insulation, but a nice video!1
Good tip!
Climate zone? Air control measures? Moisture control layer(s)? Thanks -
My shed doesnt have vents on the side, would could I skip first process.
Yes, if you don't have any soffit vents there will be no reason to install the vent baffles.
What is the purpose of insulating the garden shed? Are you heating it?
Yes I am heating it. th-cam.com/video/IQNEXxoaq18/w-d-xo.html
Fine job
I appreciate that
i thought you’re supposed to leave gaps between the baffles when you install them.
The insulation has been stapled incorrectly. According to Johns Manville and Owens Corning, insulation should be stapled to the inside of the stud, not on the face. It does make a difference in R value.
The Dura vent is for allowing air between the OSB and insulation, correct? Can you apply the insulation directly?
Correct. Yes you can but you won’t have any venting that way.
@@DIYHomesteadProjectsDIYHP10 how critical is venting? depends on climate and shed I imagine?
stiksandstones - That's how I understand it. Also I intend to run a heater in this shed from time to time in the winter. I believe makes venting more important to prevent condensation from forming on the bottom of the roof board.
Can you install insulation without rafter vents?
Did you have to vent the ceiling on each end?
Venting is dependent upon your specific needs and location.
Is there a point to doing this if I'm not going out there in the cold or heat?
I wouldn't think so.
Thank you for your video! Just a quick question. I have a 10x14 I want to insulate and put drywall up. Do you think I should use a vapor barrier as well or is faced insulation good enough with the duravent?
You're welcome and thanks for stopping by. I didn't use a vapor barrier in addition to the faced insulation and I haven't had any problems with mine.
@@DIYHomesteadProjectsDIYHP10 OK cool thank you!
Thank u!
You're welcome!
Thanks! Can you share a link from where you bought the insulation packs please?
We bought ours at our local Lowe's but you can also get it from Amazon.
Walls - R-13 EcoRoll 15inch Wide Kraft Faced Fiberglass Insulation
amzn.to/3km2YSt
Ceiling - EcoRoll Kraft R-19 23 Inch Wide Faced Fiberglass Insulation Roll
amzn.to/3QJZhSC
Hi there- what is the name of the product that you applied before you inserted the insulation. I'm refering to the long, white baffled piece. Thanks
I used a product called Durovent from Lowe's.
So you don’t put the durovent on the side wall? I’m in Oklahoma will be converting my 14x24 shed into a living space. I will finish it up with dry walls.
Great job. 🎉
I have a 12x50 shed. How do i calculate for insulation including the roof?
I will either diy it (with roll insulation) or pay the manufacturer. They want to charge 6K for spray foam.
Thanks! I counted how many spaces between the wall studs and roof trusses that needed to be filled. Then determined how many feet I needed to fill them all. This gave me the total feet I needed. I then used that number to figure out how many insulation bats I needed to buy.
@@DIYHomesteadProjectsDIYHP10 thank you. I awaiting the delivery so I can't count it yet... Just trying to decide if it's cheaper to diy it or pay for spray foam from the manufacturer.
@@ashleyhaines1910good luck! We got ours delivered a few days ago and still trying to figure out which route to go in terms of insulation. I think spray foam is just too expensive for us and bat insulation we can do in sections as budget allows.
Buy first, ask questions later. Love it@@ashleyhaines1910
Thank you for the share. Was it costly? Thanks.
There is some cost info in the video description.
what is that you put up on ceiling prior to insulation?
They are called rafter vent baffles. They keep a ventilation gap between the insulation and the roof sheathing so that you don't get moisture between the roof and the insulation as the roof surface heats and cools.
I have the same insulation, the bat face says fire risk, assuming you didn’t install sheet rock?
Is that a fibre glass insulation that you used Bruce?
Yes it is Thomas
How many packs of insulation were needed? I'm going to be turning a 12x16 into a living space.
I honestly don't remember but it's easy to calculate. My insulation came in 8' rolls so all I had to do was count the openings between the studs and trusses. It took one roll per space.
@@DIYHomesteadProjectsDIYHP10 thank you very much for the information. It is much appreciated.
You are quite welcome and I wish you the best with your project.
@@DIYHomesteadProjectsDIYHP10 thank you
@@JARestoI'm Doon a 10 x 16 right now
Which staple gun is that? And did you use the same size staple for everything?
I was using an older Stanley staple gun. I have listed in the video description a staple gun and staples that are close to what I was using. I can't seem to find the Stanley gun I have, it's probably no longer produced as it is fairly old. I used the same staples for all of the insulation instillation.
WORKPRO 6 in 1 Staple Gun
amzn.to/3GNGKA0
Bostitch SB353/8-1M Heavy Duty Premium Staples
amzn.to/3zf0WsI
@@DIYHomesteadProjectsDIYHP10 Thank you! I must have missed it when I read the description the first time. Whoops!
No worries, I wish you the best with your project.
What was total cost after insulation?
4K
Beautiful work. What R value did you use for the insulation?
Thanks, I believe it was R13 in the walls and R19 in the ceiling.
😀👍
Is there a video of installation for walls and floor?
I'm looking for the same thing did you find anything?
Please tell me that light is for videography and not photography.
how crazy is this ? it only takes 10 minutes to put an entire insulation in a shed. I am going to try it. i have ten minutes before shower and bed. I will be back.
YAY For baffle!!
What is that foam board you are stapling on the roof.
They are Durovent Rafter Ventilator to keep an air gap between the insulation and the roof sheathing. This allows air to flow between the soffit vents and the ridge vent to prevent mold, mildew and rot on the underside of the roof decking.
@@DIYHomesteadProjectsDIYHP10 my shed unfortunately does not have a ridge vent. Does this mean that I would need to install a fan and omit these all together?
What was the reason for the different vent board? The little strips and the two panels of yellow foam that looked more rigid…….
@@roberta19348 does your shed have gable vents?
Since the air flows from the soffits up to the ridge vent, it appears you overlapped them incorrectly. Moist air can be drawn up and under the top foam panel introducing moisture into your insulation.
Does the shed need to be house wrapped to insulate? Or no?
I didn’t on mine
@@DIYHomesteadProjectsDIYHP10 would that make a difference in rotting or moisture build up?
I suppose it would make a difference. How much of a difference depends on the environment where the shed is built. In my opinion and location the difference is not worth the cost and effort for the shed I built. Also the shed I built is not going to be lived in, just used as a workshop and storage. I do live in a fairly dry and low humidity location.
Where did you get your step ladder?
I've had it so long I don't remember where I got it. Probably the local big box store would be my guess.
Love your video! I just bought a she shed and my husband and I are going to try to do ours. Can I ask roughly the cost? Mine is a 10x12, just trying to get an idea 😊 thank you!
Thank you! Sorry but I just don't remember what I paid for the wood to build the lofts but I'm thinking it was $200 to $300 dollars or so.
@@DIYHomesteadProjectsDIYHP10 is that for the insulation and the durovent rafter ventilator as well?
Sorry for some reason I thought you were asking about the lofts. The insulation and roof venting was about $700.
@@DIYHomesteadProjectsDIYHP10 no problem! Thank you!
good show ole chap that is a proper install .hope some young fellas were playing attention ..wishful thinking
Thanks for stopping by :)
A $20,000 DIY shed ?
This video shows how not to install baffles. Once you install the first, the overlap of the next baffle goes on top not underneath. You defeated the purpose of the ventilation system. Bad video.
If you install the baffles the way you claim is correct, if you have a leak in the roof or any condensation it will direct the water or moisture directly into your insulation. Either method will not affect the purpose of the ventilation. They will both vent the underside of the roof sheathing. Bad comment.