Check engine light error codes from a dodge caravan

แชร์
ฝัง

ความคิดเห็น • 90

  • @christinelewis7102
    @christinelewis7102 4 วันที่ผ่านมา

    That was great. It wasn't working for me at first , and then I saw a comment that said to remember to switch back and forth quickly. I did it quickly, and it worked. Thanks to whomever added that comment. God bless you.

  • @paulsmart5199
    @paulsmart5199 4 ปีที่แล้ว +6

    Thank you, we are on holiday and engine light was on. Immediately we get the oh crap what now feeling. Did this, it worked and gave us code.. basically gas cap. No more stress

  • @YoungCrewsThaCrook
    @YoungCrewsThaCrook ปีที่แล้ว

    Thank u very much had my 2014 Dodge Caravan for about a month-and-a-half and the check engine light goes on and off did the trick you showed me got the same code less stress thanks again

  • @markoshun
    @markoshun 2 ปีที่แล้ว +1

    These directions didn’t work on 2011. But suggestion in comments said instead of from off position, go from acc to start 3x. That did the trick.

    • @KristenKing-
      @KristenKing- ปีที่แล้ว +1

      This worked for me as well on my 2017. Thanks for tip.

  • @kidstratocaster
    @kidstratocaster 3 ปีที่แล้ว +1

    Thanks for the post. Just remember to switch the three times quickly.

  • @dawnb4295
    @dawnb4295 3 ปีที่แล้ว +7

    What if you have check engine light but no codes showing?

  • @joelgarner667
    @joelgarner667 2 หลายเดือนก่อน

    So my caravan threw a low voltage code because the battery had died. I jumped the car and it’s been running just fine. The alternator seems to be charging the battery since it’s started every time since but I’m still seeing the light. Is there a way to clear the code?

  • @theburgundyandgoldreport4284
    @theburgundyandgoldreport4284 4 หลายเดือนก่อน

    Did this and after the dotted line came up No Codes. Any ideas? The guy bought it from says that sometimes of don’t twists gas cap back on properly engine light can go on and goes off in a day or two.

  • @second6028
    @second6028 11 หลายเดือนก่อน

    I have a check engine light with no codes? Should I get an actual scanner or is this efficient enough? I had a po456 code, changed my gas cap, code is gone but check engine light is still on? Any advice please

  • @ralphsanchico2452
    @ralphsanchico2452 ปีที่แล้ว

    Great help. Does it mean, however, that the PCM module is bad or is it indicating something's amiss in the coolant system?

  • @crystalgutierrez3447
    @crystalgutierrez3447 3 ปีที่แล้ว +1

    Thank you very much sir. You helped me tell this dumb people at the dealership about the code and I was right. Thank you very much.

  • @crossroadbapistminstery9732
    @crossroadbapistminstery9732 2 ปีที่แล้ว +2

    thank you so much for sharing this video now we can continue to feed the Homeless on fire 2015 Dodge grand van the engine light was staying on but we know what's wrong now due to you thank you sir

  • @andreharris9787
    @andreharris9787 2 ปีที่แล้ว +1

    I did this cause my engine light is on. But just lines showed up without a code. Then is said done. This is after I changed my bank 1 imbalance fuel ratio and spark plugs. So what can it be?

  • @mikemckenzie7817
    @mikemckenzie7817 3 ปีที่แล้ว +2

    I've used this before and it works but today I tried it and I can't get any codes out of my van even know that engine light is on must be something I'm doing wrong

  • @ddr9025
    @ddr9025 2 ปีที่แล้ว

    Thank you been having problems with emission control light!

  • @batron101
    @batron101 3 ปีที่แล้ว +3

    Extremely Helpful. Thank you!

  • @3dvisualization917
    @3dvisualization917 ปีที่แล้ว +2

    Video starts at 1:10

    • @ladennayoung2939
      @ladennayoung2939 11 หลายเดือนก่อน

      Thanks. God bless. ❤❤❤

  • @DJMB1310
    @DJMB1310 2 ปีที่แล้ว

    Can’t get out 2011 express dodge caravan to display codes.
    Have been having some issues with the fuel gage and the dte will fluctuate when I get to almost 150 miles driven on the trip A.
    Was advised that we do that due to the gage not reading true.
    Recently the check engine light has come on and the gage will fluctuate from the half to E.
    Was trying this to see what the engine code was and how much it would cost us.
    LOL

  • @rww66
    @rww66 2 ปีที่แล้ว

    So i did this procedure and it gave me the code. At first. now it doesn't do that and the engine won't start...Doesn't turnover at all. Any ideas

  • @geoffanderson248
    @geoffanderson248 4 ปีที่แล้ว +5

    Will this reset the indicator light as well or do I need to take it in the get that cleared?

    • @CoolFLDad
      @CoolFLDad 3 ปีที่แล้ว +1

      I have the same problem/question. Did you try this?

    • @kyler7590
      @kyler7590 ปีที่แล้ว

      Will not reset the light. Disconnect the battery for 30 seconds, code will be cleared.

  • @jean-micheltanguay8664
    @jean-micheltanguay8664 ปีที่แล้ว

    Thank you for the "key dance" solution :)

  • @michaelcitarelli9164
    @michaelcitarelli9164 3 ปีที่แล้ว +2

    You really helped me thank you very much

  • @johnnyburgpalermoan3988
    @johnnyburgpalermoan3988 4 ปีที่แล้ว +4

    Thx tried it on my 2012 grand caravan the engine light flases 3 time but no code tried it several times

    • @freddypb9703
      @freddypb9703 4 ปีที่แล้ว

      And what happened? My wife tried it and got a code. Now I try it and there’s no code just “done”. But engine lights remains

    • @nikitabrown4254
      @nikitabrown4254 3 ปีที่แล้ว +1

      I tried it on my 2011 and i didn't get a code

    • @reecenewton3097
      @reecenewton3097 3 ปีที่แล้ว +3

      There are 4 switch positions: Off, Accessory, Run, and Start. Begin in Accessory position. You only use that position and Run. Do not use Off or Start. So: Acc/Run, Acc/Run, Acc/Run and stop turning, leaving it in Run position. Any code or codes will appear on the dash, followed by "Done" when there are no more.

    • @zohair37
      @zohair37 3 ปีที่แล้ว

      @@reecenewton3097 Thanks Reece! No codes and it said done. I did tighten up my gas cap. Does this mean the light will go off on its own or will I have to get that done?

    • @reecenewton3097
      @reecenewton3097 3 ปีที่แล้ว

      @@zohair37 Not sure: search on line on how to turn off check engine light for your car.

  • @gazoomartian
    @gazoomartian 5 ปีที่แล้ว

    you said: I hope this video has helped
    I says: Indeed it has. No need to use an OBD device

  • @Culpepercounty-tz7vf
    @Culpepercounty-tz7vf 11 หลายเดือนก่อน

    In my van my check engine light stays on so dose how can I fix that

  • @TheSeejohnboy
    @TheSeejohnboy 3 ปีที่แล้ว

    Literally just got the se code 30° out wonder if the cold has something to do with it while I'm driving the temp stays at about 1/4 of the way instead of in the middle as normal

  • @arizonatumbleweeds628
    @arizonatumbleweeds628 4 ปีที่แล้ว +1

    Thank you so much for sharing this with us!!!!!!!

  • @Showbizz1987
    @Showbizz1987 2 ปีที่แล้ว

    Mines don't show a code at all. On Innova 3100rs show po6de. Fix it three time still no fix. Light still there

  • @John3.36
    @John3.36 3 ปีที่แล้ว

    How do you do it for a 2013? I tried it and it did not work.

  • @saxy5251
    @saxy5251 2 ปีที่แล้ว

    Sorry, but we have a 2013 Dodge Caravan and this does not work on it, nothing shows up, am I missing something ? Did it just like you explained it.

    • @nickycat7847
      @nickycat7847 27 วันที่ผ่านมา

      Just did it and it works fine. Need to make sure all of the dash lights come on before flipping to on and off 3 times

  • @mmassey05
    @mmassey05 2 ปีที่แล้ว

    Thank you. Helped me straight to identify issue

  • @josephparson7023
    @josephparson7023 3 ปีที่แล้ว +1

    Excellent info.
    Thanks!!

  • @reevesjustin
    @reevesjustin 4 ปีที่แล้ว

    Why is your dashboard blank? I'm having that issue

  • @ian_snyder
    @ian_snyder ปีที่แล้ว

    This worked, thanks so much! 💪

  • @jasminecombs658
    @jasminecombs658 ปีที่แล้ว

    What about for 2009 !! I tired it and it didn’t work.

  • @sirjustinlee
    @sirjustinlee 3 ปีที่แล้ว +1

    17F. Omg nope.. I hope its also broke. Screw that cold

  • @rolandmccabe6125
    @rolandmccabe6125 2 ปีที่แล้ว

    What is dodge trouble code 21

  • @nancybrowning3380
    @nancybrowning3380 2 ปีที่แล้ว

    on the dash P R N D what is that symbol after the letter D?

    • @evilkittyofdoom195
      @evilkittyofdoom195 5 หลายเดือนก่อน

      If you move the shifter to the +/- you can move the shifter handle left and right to manually select gear.

  • @B_Don123
    @B_Don123 2 ปีที่แล้ว

    Thank you, exact same code

  • @jasmineschooley1661
    @jasmineschooley1661 2 ปีที่แล้ว

    I made the repairs but the engine light won't reset. I tried this and didn't get any codes

  • @telberthilliman1002
    @telberthilliman1002 5 ปีที่แล้ว +2

    Very helpful

  • @wootexclusive8499
    @wootexclusive8499 4 ปีที่แล้ว

    Dope. Gonna try it!! Thanks bro

    • @ekhalkov
      @ekhalkov 3 ปีที่แล้ว

      Did it work?

  • @Barryd57
    @Barryd57 2 ปีที่แล้ว

    Did not work on my 2014 Caravan. Disconnecting the battery cleared the code.

  • @melissaknight48
    @melissaknight48 ปีที่แล้ว +1

    It didn't work in my 2015 caravan.

  • @Bushcraft242
    @Bushcraft242 10 หลายเดือนก่อน

    When my engine light comes on it shakes the car slows it down

  • @justjillvanlife134
    @justjillvanlife134 3 ปีที่แล้ว

    Do I go to run or accy ??? and it’s 3 and a code shows up???

    • @reecenewton3097
      @reecenewton3097 3 ปีที่แล้ว +1

      There are 4 switch positions: Off, Accessory, Run, and Start. Begin in Accessory position. You only use that position and Run. Do not use Off or Start. So: Acc/Run, Acc/Run, Acc/Run and stop turning, leaving it in Run position. Any code or codes will appear on the dash, followed by "Done" when there are no more.

  • @jennywills9578
    @jennywills9578 ปีที่แล้ว

    Thank you so much

  • @AvnerRosenstein-ULTRA-LXV
    @AvnerRosenstein-ULTRA-LXV 5 ปีที่แล้ว

    wow bizarre and a huge thank you!

  • @dcolum23
    @dcolum23 3 ปีที่แล้ว

    WUT! Wow, thank you for this tip!

  • @killjoy69691
    @killjoy69691 4 ปีที่แล้ว +2

    My shit just says done? What dose it mean?

  • @cliffperry
    @cliffperry ปีที่แล้ว

    Thank You !!!

  • @learysinsight5796
    @learysinsight5796 2 ปีที่แล้ว

    Ok, so I tried to reset the oil change code after, and no luck. How do you reset?

  • @sonnystarr
    @sonnystarr 2 ปีที่แล้ว

    Doesn't work on my 2011 grand caravan.

  • @duanevanwinkle3488
    @duanevanwinkle3488 4 ปีที่แล้ว +1

    Thanks but on my 2012 Caravan I had to goto the first click, then one more click 3 x. and P0128 popped up as well

  • @ETHEREALYOGA
    @ETHEREALYOGA 2 ปีที่แล้ว

    THANK YOU🙂

  • @olschoolvanner
    @olschoolvanner 4 ปีที่แล้ว +2

    Did nothing to help no codes or anything like he shows!

  • @djf6797
    @djf6797 3 หลายเดือนก่อน

    Ty

  • @sheilaemery5058
    @sheilaemery5058 4 ปีที่แล้ว

    Nice 👍 job

  • @Monsterdrumma
    @Monsterdrumma ปีที่แล้ว

    Dang not working for me.

  • @rochellemaxfield5106
    @rochellemaxfield5106 4 ปีที่แล้ว +2

    Tried this 3x this morning and no code appeared 😩

    • @freddypb9703
      @freddypb9703 4 ปีที่แล้ว

      Same here. So what did you do?

    • @truth101ification3
      @truth101ification3 3 ปีที่แล้ว

      Same here 2015 Caravan

    • @JoeUglyFatMama
      @JoeUglyFatMama ปีที่แล้ว

      On my 2018, I had to do it three times before it showed up. Apparently there is a pretty exact timing involved LOL

  • @paulboggs3663
    @paulboggs3663 3 ปีที่แล้ว

    Sorry, Did not work for our 2014 Caravan.

    • @vak3388
      @vak3388 2 ปีที่แล้ว

      Worked for mine

  • @Ht1976.
    @Ht1976. ปีที่แล้ว

    Slow down. Talking too fast

  • @ChacaConProductions
    @ChacaConProductions 3 ปีที่แล้ว

    Less talking next time please