Станция неудобная. Сброс давления удобнее гуженом или специальным клапаном, который имитировать выстрел может. Но это так.... А себе на R3m я давно на принтере такую штуку респечатал)))
@@TheEDgun Thank you for the reply. The 350 mm barrel in 22 cal, would be what I would be inerested in, for the Leshiy. I have been hearing good things about the 40 gr slug. Ballistic Coefficients and Sectional Density would be the reason that I would want to shoot slugs. Thanks again for your good work. .. And I still smile every time I shoot the Leshiy. ..😊
@@willybee3056 If you have Leshiy in .25, 31gr H&N Grizzlys work very well. You just have to resize them down a little bit, as they're very inconsistent out of the box and that is the main reason why people find them inaccurate. They dont't need that much velocity with 1:16" twist rate. 230m/s is enough to stabilize them up to 200 meters and that's what you get with 350mm .25cal barrel with regulator set to 130bar.
@@jnuvolaipsc Thank you for the reply. I do have the 350mm barrel in 25cal. I will have to give that a try. Thanks. But so far most all my shooting is at 10m in my basement. I am getting the feeling that the 22 cal, 40 gr bullets will have a higher sectional density, and a better ballistic Coefficient. And it would seem to me that they would work better at longer ranges. But, yes,, sofar, at 10 meters, I can't get better than one hole groups. And I am doing that with the Crosman 14.3 gr.
такая проблема леля 2.0 полежала в машине при температуре +2 около часов 5. После чего решил проверить давление нажав так сказать на (диафрагму которая шприцом выдувается при замене батарейки) диафрагма просто сломалась на пополам, я а....ел. Возможно ее новую заказать?
@@TheEDgun Длинна,да;материал,да,но типоразмер то на редукторах одинаковый(3,4,5 или как кой там я не знаю)да и тебе то какая разница,делай под свой ключ,а люди сами подберут под него ключик
Thank you for always listening to your customers requests and making your products better!
I just like to move forward, even by small steps!
Ed, I never planed on adjusting my regulator, but it is good to know I can if I want to. Thanks for sharing!
Good job Ed. I like it. You’ve improved your regulator with making a more low profile unit and user friendliness of it now. Thank you.
Yes, they are working perfectly now.
Excellent improvements Ed ✔️👍
Transparency, integrity, product improvement over pr. Bravo.
Возникла потребность, сделал - молодец.
Здорово придумано👍
I always like your videos.
Thank you for sharing. ..
:-) Thanks for attention!
Станция неудобная. Сброс давления удобнее гуженом или специальным клапаном, который имитировать выстрел может. Но это так.... А себе на R3m я давно на принтере такую штуку респечатал)))
Do you have plans to make barrels to shoot slugs?
Thanks and keep up the good work.
I do, but I don't know when it will happen.
@@TheEDgun
Thank you for the reply.
The 350 mm barrel in 22 cal, would be what I would be inerested in, for the Leshiy.
I have been hearing good things about the 40 gr slug.
Ballistic Coefficients and Sectional Density would be the reason that I would want to shoot slugs.
Thanks again for your good work. .. And I still smile every time I shoot the Leshiy. ..😊
@@willybee3056 If you have Leshiy in .25, 31gr H&N Grizzlys work very well. You just have to resize them down a little bit, as they're very inconsistent out of the box and that is the main reason why people find them inaccurate. They dont't need that much velocity with 1:16" twist rate. 230m/s is enough to stabilize them up to 200 meters and that's what you get with 350mm .25cal barrel with regulator set to 130bar.
@@jnuvolaipsc
Thank you for the reply.
I do have the 350mm barrel in 25cal.
I will have to give that a try. Thanks.
But so far most all my shooting is at 10m in my basement.
I am getting the feeling that the 22 cal, 40 gr bullets will have a higher sectional density, and a better ballistic Coefficient.
And it would seem to me that they would work better at longer ranges.
But, yes,, sofar, at 10 meters, I can't get better than one hole groups. And I am doing that with the Crosman 14.3 gr.
@@jnuvolaipsc
What size of groups at 200 meters can be possible?
Thanks again. ..😆
Do all the new r5m matadors come with this sticker preinstalled now ?
Yes
@@TheEDgun thank you for the reply love you work. And I can truly say one of the best airguns on the market. Hello from Kuwait
Производите ли вы редуктора под "чужие" модели винтовок?
Эдуард приветствую, хотелось бы поменять на леле редуктор на короткий (старый подтекает и объём меньше с ним), если это проблемма готов купить его.
пиши Татьяне segezha(at)edgun.ru
такая проблема леля 2.0 полежала в машине при температуре +2 около часов 5. После чего решил проверить давление нажав так сказать на (диафрагму которая шприцом выдувается при замене батарейки) диафрагма просто сломалась на пополам, я а....ел. Возможно ее новую заказать?
Да, без проблем, пиши в обрутную связь с www.edgun.ru
90° 15бар, 180° 30бар. а так вообще как циферблат часов, 12делений. Вопрос в другом, есть ли прямая линейность!?
на рабочих давлениях да, есть линейность.
Если отмыть редуктор потребуется , наклейка не отвалится ?
наверное отвалиться, мне не очень нравится, как она держиться. Но её можно снять, а потом приклеить уже суперклеем, если мыть нужно будет.
Очень удобно сделали.
Эд,в комплекте с наклейкой нужно делать флажок который бы одевался на шестигранник,для удобства
так шестигранники у всех разные, не угадаешь.
@@TheEDgun Длинна,да;материал,да,но типоразмер то на редукторах одинаковый(3,4,5 или как кой там я не знаю)да и тебе то какая разница,делай под свой ключ,а люди сами подберут под него ключик
saveing up for EdGun. N. Wales UK
На Р5М редуктор на какое давление настроен изначально?
130 бар
Спасибо.
Приветствую Эд,с ноября на р5м будут, а кто купил р5м в сентябре можно как нибудь наклейку преобрести
пиши Тане segezha(at)edgun.ru
Будет ли такая наклейка на редукторе р5м ?
с ноября 2018 такие наклейки идут на всех редукторах всех изделий.
когда будет что то новое из винтовок желательно по лицензии! в калибрах 7-9?
никогда, я не собираюсь заморачиваться изготовлением лицензионных вещей в РФ.
Вот бы можно было не разбирая так делать!