Best Scale Modeling Supplies for Beginners | 10 Essential Tools to Get Started

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2021
  • In this video, I'll show you my top ten recommendations for the gear you'll need to get into the hobby of scale modeling. These are good quality tools that will last you a long time & help you break into the world of scale modeling (without breaking the bank)!
    Be sure to also check out my video on the five best model kits for beginners: • Best Model Kits for Be...
    Product Links:
    Sprue Cutters: amzn.to/302W2zX
    Tweezers: amzn.to/3qdER9o)
    Cross-lock Tweezers: amzn.to/3wF8qC5
    Craft Knife: amzn.to/3o9jVxz
    Cutting Mat: amzn.to/3jnKZKH
    Nail File / Emery Board: amzn.to/30f6hAW
    Tamiya Extra Thin Cement: amzn.to/3GWvbGh
    Tamiya Masking Tape: amzn.to/3CWB8Al
    Paint Brushes: amzn.to/2Yx1Gti
    Respirator: amzn.to/3qhQfRz
    Air Compressor / Air Brush Combo: amzn.to/3BQXdiJ
    Air Brush: amzn.to/3wpyhO2
    Want even more scale modeling content? Join the SpruesNBrew Brew Club today! / @spruesnbrews
    *As an Amazon Associate I earn from qualifying purchases (at no extra cost to you)
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 415

  • @richardbedard1245
    @richardbedard1245 2 ปีที่แล้ว +370

    I'm 76 now, and I remember when paying $5.00 for a kit was expensive! Now I have several unfinished models(that are probably older than some of your channel members)and I look forward to getting them to the finished stage once I get my cabin finished, and my shop in order.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +22

      $5 for a model kit sounds great to me! Good luck with your cabin & hope you can get back to those kits - enjoy! 👍

    • @ronaldwatson1951
      @ronaldwatson1951 2 ปีที่แล้ว +2

      That's Great news kits a 5 bucks, I too have kits That's never been touched.

    • @robertmassucci1
      @robertmassucci1 2 ปีที่แล้ว +14

      76 you better hurry up
      I'm 60 and have 40 unbuilt and I'm worried about dropping dead b4 I'm done

    • @robertmassucci1
      @robertmassucci1 2 ปีที่แล้ว +2

      I build every day. I'm waiting on my second iwata studio pro it's out for delivery

    • @mugsnvicki
      @mugsnvicki 2 ปีที่แล้ว +8

      Well, I'm 74 and was at it since I was about 20. I remember Airfix in a plastic bag for $1.00. In fact, I still have it, a Fiesler Storch. And it's still in the bag. I just inventoried my unbuilts and there are 307 of them. I joined the local IPMS and there were people who had more, so I didn't feel so bad.

  • @ytsusan81
    @ytsusan81 ปีที่แล้ว +35

    My 13 year old grandson is visiting and he's really into WWII model airplanes. As a Grandma who has always loved hobbies, I've bought him about 10 airplanes from the hobby shops. He lives in a very rural area of WV and had never been in the kind of shops we have here in Spokane WA, he's loved every minute in them. Now I'm getting myself educated on building them in order to assist him better. I even got two models to build alongside him. I've made a list of the products from your video we still need to get. Thank you so much for this video!

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +3

      Oh I'm so glad to hear! That's wonderful that the two of you get to build together, very nice. Very happy to hear the video was helpful. Enjoy & happy building 👍

    • @patrickcanter2831
      @patrickcanter2831 3 หลายเดือนก่อน

      Lovely!! Good Grandparent!!

    • @stormtrooper3660
      @stormtrooper3660 2 หลายเดือนก่อน +1

      It’s nice to hear of someone in my area (Northern Idahoan here)

  • @garyginn9862
    @garyginn9862 ปีที่แล้ว +4

    Like so many of us "older" guys I started out building car, plane, or ship models. Then as I got older my interest switched to hanging with my friends and girls, then college, a job, marriage, kids, 2.3 - two girls and 3 dogs, can't forget the dogs😄. As my life starts to settle down and my oldest off to college, I found time to come back to the hobby I missed. With retirement on the horizon, I need to build up my stash!
    With any job or hobby, you need the right tools for the job. I used your video as my checklist, and I have all of your recommendations as my basic setup. You are correct, of course, brushes are nothing to skimp over. I transformed all of my old watercolor brushes for models, and they work great! The paint we use is another tool, which many will have their favorite type and brand. I still have several bottles of Testors enamel a few bottles of Tamiya, but my go to is Vallejo acrylic paints and washes, easy to work with a paint brush and airbrush really easy cleanup without paint thinner wafting through the air and house - pew!🤢
    This is a fun hobby and there is always something to learn from everyone in the hobby. Watching Hank of SpruesNBrews gives a lot of tips and tricks I have learned to incorporate into my builds (and an adult beverage or two).
    Thank you for your well put together and informative videos! 👍

  • @mikeandalicescott
    @mikeandalicescott ปีที่แล้ว +6

    72 years old now, have lots of hobbies and keep very busy, but I thought that I might like to try modelling. Haven't done models since I was 15, but I figured what the heck, it can't be too hard. Was I ever wrong. Foolishly I got my wife to buy me a Tamiya 1/32 Spitfire Mk IXc for Christmas, because I love WWII planes. After reading the instructions, and watching several TH-cam videos, I'm now really worried that I'm going to have a lot of trouble just trying to get it together, let alone painting. And some of the painting videos I watched just had me shaking my head in complete confusion, with their washes, weathering, etc. My model has over 50 paints required! But I found your videos; tools to get, easy models to try at first, how to paint, etc. What a relief to have someone explain the craft as well as you do. Thanks so much. I'm going to get the Airfix 109 and ease into modelling, then tackle the Sherman, and maybe the Panther, and maybe then I'll be able to try the Spitfire. It looks like so much fun after one gets good at it, so I'll work my way up. And after every session modelling I'll relax with a good craft beer, cheers to you. Thanks!!

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      That's so great to hear - thank you for sharing! That's why I do this; I know this hobby can be tricky to get into, especially with all the offerings on the market today, but it doesn't need to be! As long as you're enjoying yourself, that's all that matters. Enjoy & happy building, my friend! 🍻

  • @ph11p3540
    @ph11p3540 ปีที่แล้ว +12

    By far the most difficult modellers tool purchase was an airbrush and compressor setup. It was also a very difficult learning experience for me to get good with the airbrush. However, I was super fortunate to have a brother who was a true hardcore advanced modeller move back to my hometown he allowed me unlimited access to all his professional airbrush equipment but taught me some good quality of life air brush hacks and open a whole new network of friends in the Canadian IPMS. Rest his soul and may he always be patrolling the heavens in his BF -109G. The most important secret of owning an airbrush is to clean, clean and clean it very thoroughly between paint sessions, this cannot be emphasized enough and eliminate so much frustration.

    • @trumanfenwick8409
      @trumanfenwick8409 9 หลายเดือนก่อน +2

      Your brother sounded pretty cool. I wish more people my age were interested in scale modeling these days.

  • @maquettemusic1623
    @maquettemusic1623 2 ปีที่แล้ว +59

    Hey, I'm pretty new to modelling, and find your channel super accessible and easy going. There's no pushy videos, nothing difficult to follow and it's a lot easier to watch your personality than a lot of others. So, thank you!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +3

      I'm glad to hear it! Thanks so much for letting me know - and for watching! 👍

  • @Ty-er5ok
    @Ty-er5ok ปีที่แล้ว +23

    This is great! I'm 61 and started built my first kit, a Land of The Giants "Spindrift" in the late 60's. Really got into it from there. One of my proudest accomplishments was building a Space Odyssey 2001 Orion orbiter and lighting it up by painting the interior flat black and inserting a penlight through the bottom. I don't think anybody other than special effects people were doing anything like that back then.
    The hardest thing back then was the Testers glue we had. It was crap and took the longest time to dry and if you were not careful, went all over the place. The glue available today is such a game changer.
    Anyway, haven't built one in years and getting ready to get back in which is how I came on your video. Definitely picking up the glue for sure and possibly an airbrush and compressor.

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +4

      Nice! Glad to hear you're getting back into the hobby!

    • @colossusofhate2277
      @colossusofhate2277 5 หลายเดือนก่อน

      amazing, wish you had some pics!

  • @Pr0tectAndSurvive
    @Pr0tectAndSurvive 2 ปีที่แล้ว +11

    Unlike most people, my parents don’t really have the money to buy me modeling tools, for example. For sanding I use nail file that my mother gave me that she found in one of her packs, for glue I’ll use some glue I found at a flea market, and for brushes I use some that I got at dollar tree. for cutting sprews I use some hobby knifes I got from my grandparents and my cutting Matt is just a sheet of rubber that I found on my uncles house that he let me take home and the models are mostly starter sets so I don’t have to spend a lot of money. Anyways I’m just gonna try to get a set of model tools, paints and higher quality brushes for Christmas.

    • @stevieb6173
      @stevieb6173 2 ปีที่แล้ว +2

      that's all you need for now , the most important thing is to enjoy making them, when I was young boy my mum and dad had no money so I had to save up with odd jobs , but when I had enough I would buy a small 1/72 kit , It was so great ,no paints ever, but I still loved it , so good luck and enjoy

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +4

      That's totally alright! When I was younger, I did the same thing with kits if I was lucky enough to get them for a birthday or for Christmas. As long as you're having fun building models, that's all that matters 😁
      Thank you for watching & happy building!

    • @orbitalair2103
      @orbitalair2103 2 ปีที่แล้ว

      perfect. you dont really need a lot of expensive tools. #1exacto and blades is nice, but you can use single edge razor blades, or a snap-off type knife. heck a sharp pen knife will do too. Most things are household items, nail files, tweezers, pins, toothpicks, clothespins for clamps, masking tape. Back 100 years ago when I was a kid, before all these fancy tools, thats all we had, so we used them. I build alot of Monogram planes with the basics back in the 70s.

  • @Kozzzmozzz7
    @Kozzzmozzz7 16 วันที่ผ่านมา

    My uncle was a WW2 model builder back in the day when i was young, it looked amazing his diorama's. Now im 42 and I'm getting the itch to do this. thank you for your very helpfull channel , my itch is growing 🙂

  • @gerhardmoeller774
    @gerhardmoeller774 ปีที่แล้ว +7

    Great…. I am newly retired and looking for another hobby (along with photography and amateur astronomy). I built many model airplanes as a kid… And your videos have reinvigorated my enthusiasm for the same. And , you have given me the tools, to potentially do a much better job. Anxious to get started. Thank you so much.

  • @jimmychengdu
    @jimmychengdu 2 ปีที่แล้ว +5

    Without a doubt a fabulous communicator AND easy to follow step by step. I can’t tell you how many times I started a video that was going to be good and informative, but it was just to different to listen to, you have a keen and witty sense of humor without "trying " to be funny-your a natural teacher and master of communication, Im happy to have found your channel.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thank you so much! I really appreciate it - that's fantastic to hear. I'm glad you enjoyed & welcome aboard 👍

  • @geoffreyentwistle8176
    @geoffreyentwistle8176 2 ปีที่แล้ว +2

    Exactly what I was looking for - I always love seeing people who can explain WHY they recommend something; I also appreciate knowing where pros find they can cut corners, as opposed to where they highly recommend a particular product or brand.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      I'm glad you enjoyed! Thank you very much 👍

  • @PaulMcCartneysWife
    @PaulMcCartneysWife 5 หลายเดือนก่อน +2

    Omg thank god I found this video! I need model tools

  • @ef7andapp170
    @ef7andapp170 2 ปีที่แล้ว +2

    I agree with all of your suggestions. The nippers, Tamiya glue, thin masking tape and sanding sticks were the biggest game changers for me when I was first starting out.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thanks! Glad to hear 👍

  • @Aso_icy
    @Aso_icy ปีที่แล้ว +2

    Man I just started modeling all you begginer vids help me so much there’s not much I have found for beginners on yt but you have taught me a lot just 30 mins! Can’t we wait to see you grow on yt much more

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +1

      That's great to hear! Welcome aboard & happy building!

  • @theslaughterhouse7310
    @theslaughterhouse7310 2 ปีที่แล้ว +1

    I'm getting back into the hobby after 30+ years and needed this refresher video. Great recommendations.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Welcome back! Glad to hear it helped - happy building! 👍

  • @marksaenz6309
    @marksaenz6309 2 ปีที่แล้ว +5

    Thanks for the video! I'm working my way back into the hobby after being away for probably 30 years, with the exception of the airbrush, these were my gotos as well.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks for watching!! I appreciate it - glad to hear you've found success with a similar setup! 👍

  • @AlpenaAthiest
    @AlpenaAthiest ปีที่แล้ว +2

    I loved modeling as a kid, now at 61 want to do it again only stepping up the game. I watched this video and ordered everything from your links. Bought a few cheap, easy models to get started before I tackle my Jupiter 2, Spindrift, Enterprise etc. Thanks for the info, very helpful for a beginner.

    • @slrkls
      @slrkls 9 หลายเดือนก่อน

      Heck yeah mate, welcome back to the hobby! I built a lot as a kid too and got back into it 5 or 6 years ago. The new kits out these days are absolutely impressive compared to the ones I built as a kid. As an older gentleman myself my eyes are definitely not what they used to be and I found a head worn magnifier to almost be a must have as well. Been pivotal in painting cockpits and some photo etch. Have a blast !

  • @rossbyers1
    @rossbyers1 4 หลายเดือนก่อน

    Thanks for the tips. Really enjoyed watching

  • @Subzero2151
    @Subzero2151 2 ปีที่แล้ว +2

    Quite new to the channel, great content, love to go through and watch all the old videos !! keep up the great work and have a great christmas !!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Welcome! Thanks so much for watching & saying hey! And right back at you - Merry Christmas 👍

  • @pw4007
    @pw4007 ปีที่แล้ว

    Really like your videos. I'm new to modeling and it is daunting, seeing all the great work out there and unsure of my own abilities. It's reassuring seeing you walk us through the basics. Thanks very much.

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Very much glad to hear - thank you!

  • @sillysnot
    @sillysnot 2 ปีที่แล้ว +1

    I knew about tweezers and a file but not the rest. Your explanations and examples for using each item was something most other videos I watched left out so Thank You.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks - I'm glad it was helpful!

  • @SBMMac
    @SBMMac ปีที่แล้ว

    Thanks for this video! Now I know what all I need to get to feel ready to begin my new hobby!

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      That's great! I'm glad to hear it - happy building!

  • @ub-4630
    @ub-4630 3 หลายเดือนก่อน

    First video and I like this guy already. Subbed.

  • @warmachine5835
    @warmachine5835 ปีที่แล้ว +1

    The "Amazon Special" airbrush starter kit is a great recommendation. It was one of my first purchases as a beginner and I'm still using the same compressor today, 8 years later. I'd go one step further and recommend getting one of the kits that includes a tank. It's relatively inexpensive for the extra quality of life of not needing the compressor to run constantly through a painting session.

  • @markfoster9199
    @markfoster9199 ปีที่แล้ว

    Like this, concise, to the point, practical and well presented. Hat's off 👍🏻

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Oh thank you! I really appreciate it!

  • @madveteran7176
    @madveteran7176 6 หลายเดือนก่อน

    Hey Hank I am very new to scale modelling I used to do warhammer miniatures. scale modelling is on another level I am enjoying it so much I am so glad I found your channel I am learning so much man keep up the good work you are doing 🤘🏻😎🤘🏻

  • @XmortoxX1990
    @XmortoxX1990 7 หลายเดือนก่อน +1

    Now I have a shopping list to buy and improve my current model building kit

  • @scifi_dragon
    @scifi_dragon 9 หลายเดือนก่อน +1

    Thanks for another great video. I've been building plastic kits since I was 10 - I'm now 74 (do the math...). Even so, your videos give me new ideas, techniques and materials I haven't really used before. LOL - I may have to stop watching your vids, all these new ideas are getting rather expensive (new paints, primers, brushes, etc). My latest acquisition was 2 bottles of Tamiya cement - works great, I love that stiff little brush, very accurate application. BTW, I've began airbrushing with a Testors kit (canned air, cheap airbrush) many years ago. Now I use a compressor & a Badger airbrush - I still need to make 'practice runs' for some detailed work (like cammo patterns) so don't feel bad if you're still not 100% using an airbrush.
    BTW - this video was great. These days there are so many products out there new hobbyists can certainly use a little guidance as to which products are essential and which aren't. Way to go Hank!

  • @BOABModels
    @BOABModels 2 ปีที่แล้ว +11

    Really good run down of equipment for beginners. When I was starting out, I had to experiment with different items at the hobby store and then find that there was a better product out there.
    In my opinion though, a beginner should get a few models under their belt before deciding on an airbrush to make sure they want to stick with the hobby. I still don't use one personally although I do want to get one eventually.
    You've got a great channel and your videos are really professional. 👍

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +4

      Thanks very much! And I totally agree (and should have made that more clear) - it's a good idea to build a few before investing in a compressor setup just to make sure you're hooked 👍

  • @xxcxpl
    @xxcxpl 2 ปีที่แล้ว +1

    Great info - thanks for taking your time to share/produce/spread it 🖖

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thank you - I appreciate it! 👍

  • @claudenewbolt2659
    @claudenewbolt2659 2 ปีที่แล้ว

    I LIKE THIS GUY, HE TELLS WHAT YOU NEED TO BE A HOBBY SCALE MODELER!

  • @hitmanjonzee4260
    @hitmanjonzee4260 2 ปีที่แล้ว

    Hey just found your channel and found it very easy to watch, and the info you give is awesome! I am new to scale modelling "again" after taking several decades off. All my kits never survived past the 4th of July! Got a bunch of kits already and looking to get a new airbrush to help out! Thanks for the video and I shall be following!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Haha that's great! I'm glad you found it, too 👍 hope you can build up a new batch for yourself... and maybe these ones will survive the 4th! 😅

  • @ricksrealpitbbq
    @ricksrealpitbbq ปีที่แล้ว +3

    One more plus for an air brush is that you can spray any color you want. When I first started building models my spray choices were limited to what colors I could find in aerosol cans. I’ve been into modeling since the 60’s.

  • @stephenhenion8304
    @stephenhenion8304 2 ปีที่แล้ว +2

    This was a great video.... especially the respirator and airbrush....thanks, Man

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you!! I appreciate it - thanks for watching! 👍

  • @matthewhoney362
    @matthewhoney362 ปีที่แล้ว

    Number 10 is going to make me a happier man. Always used a sharp knife and tried to balance the plastic on a hard surface, Usually worked but when it didn't!!!

  • @fingerfeller
    @fingerfeller 2 ปีที่แล้ว +1

    excellent video, thank you for the tips and hard work to do these videos

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you very much - glad you enjoyed! 😁

  • @longyang8964
    @longyang8964 2 ปีที่แล้ว

    Thanks a lot for the recommendation! I purchased all of them, look forward to building some models!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Glad to help! Thank you for watching & happy building! 👍

  • @tmlewis4242
    @tmlewis4242 6 หลายเดือนก่อน

    Thanks for your recommendations

  • @philipsquires3060
    @philipsquires3060 2 ปีที่แล้ว +4

    Great video! I'm a little nervous about getting an airbrush, but I have to to get to that next level. I use a pair of magnifying glasses with a light, very handy!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you! And yeah it can be a bit of an investment, but it's very rewarding once you start practicing & discover all the things you can do! 👍

  • @michaelcooke2559
    @michaelcooke2559 2 ปีที่แล้ว +1

    Nice recommendations. Thanks for sharing.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks! Glad you enjoyed 👍

  • @e-rj8984
    @e-rj8984 2 ปีที่แล้ว +3

    Thanks for Your worthful information 👍
    It has a great vallue for more than beginners in the field of plastic models 🌷

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thank you very much! I hope it was helpful 😁

  • @leonpeters3377
    @leonpeters3377 ปีที่แล้ว

    As a newbie looking to get in to scale modelling, your video is exactly what I was looking for. Good info. :)

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Great! I'm glad to hear it!

  • @marksixofone4104
    @marksixofone4104 2 ปีที่แล้ว +31

    Thanks. A great range of tools to start out with. I would suggest wooden tooth picks/cocktail sticks and cotton buds/Q-tips as absolute modelling essentials.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +2

      Thank you! And those two are definitely important ones as well, good recommendations! 👍

  • @virgil.101
    @virgil.101 2 ปีที่แล้ว +1

    Just found your Chanel and I'm glad I did! Great video! keep it up.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Oh great! Thanks so much - and thank you for watching! 👍

  • @jloki9259
    @jloki9259 4 หลายเดือนก่อน

    I started building models around age 5 or 6. By 10 I was painting them fairly well (for a kid that age) and was lucky enough to have my parents buy me an airbrush - no compressor yet, I was using cans of compressed air. I still vividly remember finishing the Tamiya Panther that was the first kit I used the airbrush on - after some practice on old toy cars. As I looked at the camoflauge pattern and smooth surface the airbrush allowed me to attain I knew then that I had taken a giant step forward in my model building hobby. I strongly suggest that if you are building models and enjoying it and plan to continue - invest in an airbrush and compressor! You'll amaze yourself and never regret it!

  • @elijahscott3063
    @elijahscott3063 ปีที่แล้ว

    Thanks for the vid bro my grandfather left me a lot of cool stuff when he passed some of them finished and unfinished models one that he loved but never finished was a model of his car I can’t remember the name of the car but I know he loved it dearly and now I want to honor him by finally finishing his car thanks so much

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +1

      Oh that sounds really nice - I hope you enjoy the project, what a great way to remember your grandfather.

  • @jamescree6732
    @jamescree6732 2 ปีที่แล้ว +1

    I agree with all your recommendations,
    Nice video

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you very much - and thanks for watching! 👍

  • @dalemettee1147
    @dalemettee1147 9 หลายเดือนก่อน +1

    One thing that I noticed in another video was a sharp stick to help place masking tape and for pressing edges down at seams. In the nail art industry an orange stick is used to push down cuticles on finger nails. Perfect for modeling also. Coast maybe $1.00 or so for each. they can be sharpened to a fine point or crease.

  • @declan1278
    @declan1278 9 หลายเดือนก่อน

    Good advice mate said love your vid's

  • @karenmurray3098
    @karenmurray3098 6 หลายเดือนก่อน

    great video one thing i would recomend are some aligator style clips for holding parts when painting

  • @danielorourke5224
    @danielorourke5224 ปีที่แล้ว

    subscribed, great channel keep up the good work

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Thank you very much - welcome aboard!

  • @Gynra
    @Gynra 7 หลายเดือนก่อน

    I've been modelling for years (but I wouldn't class myself above "vaguely competent"), and this is great advice. That's my Christmas list sorted!

  • @nitroAl67
    @nitroAl67 ปีที่แล้ว

    Great video! Just subscribed, I’ve been modeling for 20 years but need to step it up a notch, got a new airbrush, have to experiment with it. Usually built cars , but started doing WW-2 aircraft . Your airbrush segment really helped.

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Ah I'm really glad to hear it! Thank you for your support & welcome aboard 👍

  • @harildd
    @harildd ปีที่แล้ว +1

    awesome video, I see so many comments of people saying they are 60 and still modeling make me look young haha, I'm 15 and really enjoy making kits I've been building them most of my life and it feels like I'm the only person my age still keeping the hobby alive !

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      That's great! Scale Modeling is for everybody - you keep doing you 👍

    • @harildd
      @harildd ปีที่แล้ว

      @@SpruesNBrews thanks it's something I really find enjoyable

  • @cmm30
    @cmm30 6 หลายเดือนก่อน

    Just want to thank you man.

  • @barrysmith8193
    @barrysmith8193 ปีที่แล้ว

    I’m building a time accurate late 1800’s HOn3 model logging railroad and my scheme calls for buildings etc. that are time weathered and naturally aging. Your narrative is excellent for those that wish to get into this level of modeling. There is no substitute for learning the correct skills using the correct tools. Having and using these correct tools will in its self will generate confidence in achieving your desired results.

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Very cool! Sounds like a great project - enjoy! Thanks for the kind words & glad to hear you appreciated the video. Cheers 🍻

  • @julianlineham
    @julianlineham 2 ปีที่แล้ว +1

    Really good tips, I’m just getting back into modeling not having done it since the late 70s. Looking forward to trying airbrushing as I never got to that level.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you - and welcome back! I think you'll enjoy airbrushing, it's a wonderful experience.

  • @arsletirott
    @arsletirott ปีที่แล้ว

    Thanks for reminding me of this, sir. I am so excited to start projects

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +1

      I'm glad to hear it - happy building! 👍

  • @Dogger1230
    @Dogger1230 2 ปีที่แล้ว

    Great video! And I never thought of a respirator. Good idea to have one

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks! And for sure - safety first! 👍

  • @NAMVETSTARLITE
    @NAMVETSTARLITE 2 ปีที่แล้ว +1

    GREAT VIDEO
    I'm 75 been modeling off & on for 58 years.
    Besides making great models of history.
    You learn history.
    OOHRAH
    SEMPER FIDELIS
    My brothers & sisters.
    MODEL ON

  • @robwalker5030
    @robwalker5030 2 ปีที่แล้ว +1

    Hi, only recently came across your channel. Some really good advice for beginners. I by no means am a professional in any way but enjoy the hobby nonetheless. Like yourself I got back into it after many years away from building my first kit as a youngster and wow, how things have changed. Good advice on an air brush kit, as this is a good thing to get into. You don't have to go expensive and you will probably find just upgrading an air brush will suffice when you get better at it and that first compressor will be adequate for many many years.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thank you - welcome! And I totally agree with you on the air compressor piece - I've been using the same compressor I mentioned in this video for years now & haven't had any issues (though I have upgraded my airbrush in that same timeframe). Thanks for watching 👍

  • @mrwdpkr5851
    @mrwdpkr5851 ปีที่แล้ว

    Thanks for posting this .

  • @chickencoop2222
    @chickencoop2222 2 ปีที่แล้ว +2

    New to the channel and excellent videos! one quick audio tip, i love the set up but all the brick and open space leads to a decent amount of reverb, behind the camera try and hang some heavy blankets if not acoustic blankets to cut it down. Its not noticeable on mobile I've found, but on headphones you can really hear it. Other than that i love the content and please, keep it coming! I picked up a M4 Sherman because of your beginners, and as a veteran Gunpla builder I'm excited to try my hand at scale models. Thanks!

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks! Yeah the audio is a little punchy in that room, need to adjust my setup. Glad you're giving the M4 a go - good luck & enjoy! 👍

  • @mister10x54
    @mister10x54 ปีที่แล้ว

    thanks sir for sharing

  • @bgdaddy42069
    @bgdaddy42069 ปีที่แล้ว

    i have an iwata over 10 years old i love it

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +1

      That's great! They make some wonderful stuff 👍

  • @avantigaming1627
    @avantigaming1627 ปีที่แล้ว

    Thank you very much for this video! I am just now thinking of starting with all this and I was wondering what to buy and where to buy it. Very helpful!

  • @matthewwhitehead7105
    @matthewwhitehead7105 11 หลายเดือนก่อน

    I'm really enjoying your channel and learning new things with each video. One minor criticism though, it'd be nice to see you promote local hobby stores rather than Amazon. I think it's important to the hobby to have resources nearby and supporting them with our business is the best way to do that. Just my 2 cents. Thank you for the great content!

  • @msee383
    @msee383 ปีที่แล้ว

    Great presentation - thanks.

  • @basfinnis
    @basfinnis 2 ปีที่แล้ว +1

    Good information. Thanks 😉

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you! Glad it was helpful - thanks for watching!

  • @DarKKlusteR
    @DarKKlusteR 9 หลายเดือนก่อน

    Just did my first Starship Model Kit from Polar Lights. The USS Voyager 1:1000 scale model snapping kit. Didn't exactly come out how I wanted it to as it was my first ever kit. Accidentally broke a small spoke of the hanger bay door so now it can't really fit into the 2 holes it was supposed to go in, but that's okay as it's not too noticeable. At the very least I got the kit together. The main problem I have is that my hands shake a lot with smaller pieces. After finishing the kit I went online to look for tips and tools to use. Your video came up and I think what you have chosen will help me with future model kits.

  • @DavidCooper-rl2ue
    @DavidCooper-rl2ue 11 หลายเดือนก่อน

    Thanks for everything IAM 60 I used to build models but IAM getting back in now I know what to get thanks again 😎👍

  • @justindunlap1235
    @justindunlap1235 ปีที่แล้ว

    I also like to keep a set of needle files for cleaning up flash and add details.

  • @Cherb123456
    @Cherb123456 ปีที่แล้ว

    Thank you!

  • @michaeldeckert6023
    @michaeldeckert6023 ปีที่แล้ว

    Thank you

  • @TPaine1776
    @TPaine1776 2 ปีที่แล้ว +1

    Hemostats work very well for holding parts and decals as well.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Good to know! Thanks for the recommendation! 👍

  • @Telechronic
    @Telechronic ปีที่แล้ว

    This guy is exactly right about everything he just said.

  • @MrGudz788
    @MrGudz788 ปีที่แล้ว

    Many thanks for your recommendations. I’ve started to pick up a few suggestions for my tool box…….

  • @RajeshKumar-zd7ru
    @RajeshKumar-zd7ru ปีที่แล้ว

    That's exactly what iam looking for

  • @missfish4160
    @missfish4160 ปีที่แล้ว

    Thank you for this video, I've been wanting to get into model ship kits for a while now but holding off because I didn't know where to begin with supplies- particularly when it comes to getting an airbrush.

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      I'm glad to hear it! Happy building!

  • @LennyKaosium
    @LennyKaosium ปีที่แล้ว

    Thanks

  • @jamesunger8433
    @jamesunger8433 ปีที่แล้ว

    I've been out of the hobby for a long long time and I've been picking up supplies tools new car kits. purchased a heavy-duty compressor and Iwata airbrush to go with my Paasche.... got my spray booth setup..... my burning question is this do you recommend natural brushes ie sable for solvent paint and nylon brushes for acrylics? I don't want the solvents to melt my nylon brushes is correct? I do understand that one must never mix brushes. anyways I like your methodology with how you convey your information thank you. I'll watch some more of your videos and I look forward to learning much more about this awesome hubby!

  • @eclipsehorse8693
    @eclipsehorse8693 ปีที่แล้ว

    Thx for the rundown for all the hobby gear. Im a seasoned model builder, and i can attest for the importance of good equipment and quality tools- especially the airbrush! Thx so much for conveying price and availability to the younger crowd, and letting them really know what's in involved. I know this is just the tip of the iceberg as far as actual tools are concerned, but it's enough to get started for the firts time, or back into the hobby after (insert years here). I was really interested on your brush assortment for miniatures- is there a certain size range you gravitate toward the most?
    Thanks again for all you do!

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Thank you! I really appreciate it - as for the brushes, I really mix it up a lot. I haven't found anything that I absolutely love, but I find myself using the ones I reference in this video the most 👍

  • @marioesteves8168
    @marioesteves8168 ปีที่แล้ว

    This comment comes out from my side because I realy liked your video and your suggestions.
    Most of all I realy liked when you made the suggestion of a realy nice respirator, with adequate filters for vapors and solvents.
    Guys (and girls) please chose one with soft smoth edges.
    Onther thing that I believe should always be present in any recomendation - a well ventilated space - and why not a small fan at one of your sides, at the working table , it sends fresh air, guaranteed a permanent flow of fresh air towards the face, no gale is needed, just ensure a permanent breeze.
    Glues, in general, act as solvents releasing vapors, a breeze, a side air current is enough to keep those vapors away from breathing by sending them towards a window, or an extractor.

  • @coolbrogoodstory7955
    @coolbrogoodstory7955 2 ปีที่แล้ว

    Great video thanks

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks for watching! 👍

  • @organicpaul
    @organicpaul 2 ปีที่แล้ว

    Thank you.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thanks for watching! 👍

  • @user-bd8nk2xm2t
    @user-bd8nk2xm2t 6 หลายเดือนก่อน

    Use different glues for different jobs, tube glue for bigger parts, liquid for smaller parts. Use regular masking tape, works just as well. Get your paint brushes at the art section at a hobby store. I use a white cutting board for my work area, probably cheaper as well.

  • @richardbarker2928
    @richardbarker2928 ปีที่แล้ว

    Hi from England 🇬🇧, I've just recently found your channel as I've just got back into model making(wargaming) after getting married, kids etc. Your channel is excellent as it's helped me learn new aspects of the hobby,as you say, you are always learning new techniques. Also years ago I never had a airbrush but agree with you 100% it's a game changer,I tried it out on a old sherman easy8 and was amazed how well it came out. I build 1/72,1/76 for wargaming but everything you say is relevant whatever size. I hope to invest in a 1/35 scale panther and metal tracks as an extra. Perhaps you could a vid on metal tracks. Keep up the good work 👏

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว +1

      I'm so glad to hear! Thank you so much & welcome aboard 😁

    • @richardbarker2928
      @richardbarker2928 ปีที่แล้ว

      @@SpruesNBrews thank you...Happy modelling

  • @ronaldwatson1951
    @ronaldwatson1951 2 ปีที่แล้ว +1

    Excellent points, I use to build ships for years and sold them. My goals are 1/48 scale model planes only. I'll definitely will be viewing your channel- Thanks

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      Thank you very much! Welcome aboard 👍

    • @ronaldwatson1951
      @ronaldwatson1951 2 ปีที่แล้ว

      @@SpruesNBrews Appreciate the comments , are their people that get paided for building models? I have a F15 E kit that truly intimidating, that I rather pay than to tackle it any recommendations would be appreciated.

    • @genekloszewski5484
      @genekloszewski5484 2 ปีที่แล้ว

      The 1/48, are a good scale, can mix with trains, figures, buildings, & vehicles...

  • @justinhealey2408
    @justinhealey2408 5 หลายเดือนก่อน

    When covid hit i ended up getting pikn up a tamiya pz2 with a few afrika troops real cheap like$10 and i really am happy with it. Tryin for a diorama now

  • @JohnCranberry23
    @JohnCranberry23 2 ปีที่แล้ว +1

    Purchased The Millennium Falcon Perfect Grade. Have my gear, wish me luck 🥰

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Oh nice! Good luck & enjoy! 👍

  • @SaorAlba1970
    @SaorAlba1970 2 ปีที่แล้ว +2

    i started building and painting model kits when i was 14 or 15 years old back in 1984/85 back then we had to use paint brush and humbrol paint tins to paint our kits as i couldn't afford a airbrush never mind a compressor in 1990 i bought my first airbrush a badger 200 i had to use cans of compressed air with mixed results until a got a revell starter air compressor then i upgraded my airbrush to a Aztek i had that for 10 years until a upgraded to a harder & steenbeck infinity 2 & 1 then a got a cheap Chinese made dual tank compressor which was a jump up from my Revell compressor but it was very loud it broke down 5 years later and i bought a Iwata Smart Jet pro a great air compressor which is almost silent and i bought a Iwata Eclipse HP CS i already had the H&S infinity and Tamiya's spray works trigger type AB ... ive been building Model kits for nearly 38 years non stop ... i can't wear the face mask you showed as i bought a similar product it suffocates me ... anyhoo i like your videos ... i tend to airbrush Acrylic paints like Tamiya, Vallejo, Mig, AK and Akah

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว +1

      Thanks for the rig rundown - sounds like some good stuff! Happy building 👍

  • @nathanwheeler3782
    @nathanwheeler3782 2 ปีที่แล้ว

    Great stuff

  • @andreadiiorio4123
    @andreadiiorio4123 ปีที่แล้ว

    Hi I've stopped making model kits for a long time now, but now in my 60's I want to get back into it and totally agree with what you just told us, only one thing that bugs me about model kits, my passion is cars, have done a lot of cars, but I noticed that there is no 1/8 scale cars anywhere I look, do you know if there is a brand that still makes them, I still go for 1/12 or 1/16, but I prefer The big boys 1/8 if you do please let me know and hats of to a great video, will watch your other ones later, Thank You

  • @ericbortega
    @ericbortega 2 ปีที่แล้ว +2

    I purchased a portable battery powered airbrush and it is working wonders for priming and base coating. I know I will upgrade to a better airbrush and compressor/tank in the future, but $60 wasn't bad to get something to try out.

    • @SpruesNBrews
      @SpruesNBrews  2 ปีที่แล้ว

      That's great! So glad to hear it's working well for you! Happy building & thanks for watching 👍

  • @jasondylansargent2195
    @jasondylansargent2195 ปีที่แล้ว

    Cool advice for the young guys to get to plastic modelling good for your mental to 🏴󠁧󠁢󠁷󠁬󠁳󠁿👍

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Thank you! I appreciate it 👍

  • @JohnDL212
    @JohnDL212 ปีที่แล้ว

    I came for the video but stayed for the "Smuttynose Brewing Co." T-shirt. Awesome!

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Heyy! Alright - cheers! 🍻🦭

  • @PeteinFlorida
    @PeteinFlorida ปีที่แล้ว

    Great video

  • @justing4601
    @justing4601 ปีที่แล้ว

    Thanks.

  • @markwoods4574
    @markwoods4574 ปีที่แล้ว

    Greetings from England my friend , excellent video by the way I’m retired now and I’m now building a Airfix Lancaster Bomber from WW2 for the first time since I was a child I’m 55 next month so fingers crossed I don’t mess it up 🤞Goodnight

    • @SpruesNBrews
      @SpruesNBrews  ปีที่แล้ว

      Hello! Sounds like a great project - enjoy! 👍