Damn 3k laps before a refresh is a lot better than I thought it would be. Thanks for all the cost breakdown videos you've done. It's hard even finding an rough estimate around the internet and it's fun seeing how you guys make it happen every week! Give em hell this weekend!
Way different now compared to when I raced LMSC in the mid-late 90's. Engines were all custom with 6.250" rods, cast iron bowtie heads, performer intake with a 350cfm 2 barrel. A very good hp number was 358.
I love the cost videos because it’s extremely educational just learning the ins and outs of what it’s takes for y’all to get a car on the track. Then again, I just enjoy the videos you put out 🤷♂️😂
Enjoyed the information in this one. I'm defiantly interested in a video going over the differences in the two. Thanks for all the hard work you put into the videos!
Loved the video. Back in my racing days (mid 80s) our engine would be a 4 bolt main stock block. Forged pistons, rods and crank. Motor noted 30 over for a total Cid of 355. Dart aluminum heads crane cam and edelbrock intake. We also had a 650cfm limit. Total cost, parts and machining would be around $6,500 bucks. I real engine professional build and dyno tuned was around 12k.
Is that the same Rayvon Clark that used used to run dirt late models at 311 Speedway (Madison, NC) and Log Cabin Speedway (Rocky Mount, Va) in the late 80’s and 90’s? Haven’t heard that name in many years! He was from Riedsville.
As I'm looking into buying a late model car for my local NY track, I'd be interested in a video breaking down the difference between the 2 and a run-through of your limited late model. Thank you for info, not many people would share what you do.
I spent $9k on a used(rebuilt) bored out 602 crate. Including accessories and flywheel/clutch for my weekly racing modified(see profile pic). You did alright I'd say.
Cool to see someone show the behind the scenes info. for people who are not familiar with what you guys are running. Landon, for the people who might be wondering, what if anything different can you do to your weekly ride versus a CARS Tour car as far as equipment and any rules that are different? Just one example: If the cars tour group was gonna run twins at Hickory, would the 20 lap tire rule apply like it does to the weekly group? Can you do anything different to the chassis etc? See you Saturday!
Well it is way less than the spec engines they use now in the USMTS series which I believe are around $25,000.00 to $30,000.00. Now the Nascar B mods are around $14,000.00 to $15,000.00. Which I believe the lap count is 1200 to 1300 laps for either one. (Of course, racing on dirt the engine builders don't want the laps going much past that lap of 1200 to 1300 laps)
Yeah some these asphalt guys heads would explode if they knew what we’re spending on top level dirt engines. Heck we’re spending more on engines for classes considered beginner classes than they’re spending on engines for there top level classes apparently ( for those that don’t know for a competitive dirt latemodel engine you’re spending as much to refresh it every 1250-1500 laps as he has in his entire engine)
Yup. I do my own engine work on my b mod and it's a little disheartening knowing you're going up against guys who are spending 15k plus on a motor. Even a new 602 crate is going for North of 6k these days. If more people worked on their own stuff instead of just spending more money the sport would be better for it
Looks like a super T10, as for the transmission, aluminum case and very sought after for early to mid 60's Corvette's, probably around $1500.00 on today's market for muscle car parts, Thank's for sharing man!! Very informative 👍
You sound like you have your budget under control. Its easy to spend up big. I have built many race cars using your method. Be good to see a comparison between the cost for both cars. Have a good run this weekend.
If you do a video on the crate motor cost, include what it costs to buy from GM plus what it costs to have it Blue printed by an Authorized Engine Builder
what kind of exhaust/muffler setup do you guys run down there? You east coast guys have a very high pitched exhaust sound compared to the west coast of being low & beefy
What’s your suggestions to someone wanting to help out on a team doing anything that is needed when they move to the Hickory area from Iowa at the end of May? Thank you!
You forgot a few things including headers, y-pipe, muffler and motor mounts (offset, straight up, etc). Headers are a big deal, depending on ride height rule (does exhaust count to ride height), above bellhousing crossover (looks like yours are not) or straight back, with lower crossover, etc. Headers sizing is another big rule issue, I.e; 1 ⅝ or step headers 1 ⅝ stepped to 1 ¾ or 1 ¾ complete , or if Tri-Y legal or not.
Awesome video man, very informative! Us gearheads love this kind of shit😂also a video explaining the differences between a LMSC and a limited would be awesome, awesome vid man!🤘🏻
Where did the hair go bubba lol?? Anyways, thank you for an informative video. This helps people understand the costs that go into this sport. Kickass this weekend bub!!
@Landon Huffman I thought you had just brushed it back lol. The hair added to the persona that is The Claremont Kid. Just kidding bub, I really hope you give them boys hell this weekend. You're a helluva wheelman.
Since you’re gonna be around the CARS Tour anyway, maybe a quick differences video between the LMSC and the pro late model? Especially since the pro and super are the same chassis just different engines. All your videos are great, so keep it up!
What sucks is the outlay for the price of the car engine and everything you need to go racing is a lot of money for what you get paid by your track you race at
I actually just bought myself a late model race car and I'm going to make it look like Dale senior's race car And I'm going to race it at Langley Speedway.
@@broersmaracing8295 uhm the car in the video is 500lbs+ heavier than a ump mod which top cars are hitting 800hp+ now and 700lbs+ on a dirt latemodel which are making 900hp+ now But asphalt are still on suspension technology stuff that hasn’t been competitive on top level of dirt for 15-20yrs (dead serious)
engines seem to be the prohibitive factor in running...if you are handy enough, you can take an older chassis and run with it but the cost of an engine kills it
Hey Landon quick question about the triple disc clutch setup.. I recently installed a triple disc on our prolate model and followed the instructions to the letter but when we fired it up we keep getting a knocking sound inside the Belllhousing..any ideas? Love the content
I like these videos, I always wonder how much your stuff costs compared to our road race stuff. Is there a Mopar option for you guys? Just curious I'm a bow tie man ;-)
This is cool! You get motors two mile from our house! The wife and me still plan on buying you a beer after a race. Assuming you are heading back to the bar in Claremont. All the videos like this are great. I'm sure not many fans understand cost, time and effort you guys invest on your cars. Thanks as always Landon!
Ready for some North wilkesboro speedway. And my bf ask plz plz if you know anyone in the Allison legacy series tell them get date at north wilkesboro 😊
A LMSC/LLM comparison video would be great. I enjoy the shop videos, because they remind me of working on my family’s LMSC.
I’ll try to get one out next week!
Damn 3k laps before a refresh is a lot better than I thought it would be. Thanks for all the cost breakdown videos you've done. It's hard even finding an rough estimate around the internet and it's fun seeing how you guys make it happen every week! Give em hell this weekend!
Way different now compared to when I raced LMSC in the mid-late 90's. Engines were all custom with 6.250" rods, cast iron bowtie heads, performer intake with a 350cfm 2 barrel. A very good hp number was 358.
Got about 500hp nowadays.
I love the cost videos because it’s extremely educational just learning the ins and outs of what it’s takes for y’all to get a car on the track. Then again, I just enjoy the videos you put out 🤷♂️😂
Enjoyed the information in this one. I'm defiantly interested in a video going over the differences in the two. Thanks for all the hard work you put into the videos!
No problem man! Thanks for the support!
I would love to know the difference between the late model stock and the limited late model
Yes please on the LMSC vs. limited! Love the all the shop videos. Wish my race shop was that big and organized😂
Dude it isn’t organized, we just hide it well 😂😂
@@LandonHuffmanRacing Race shop 101😂
Definitely appreciate the cost videos. Cool getting some detailed look at the engine too. Good stuff
Yes please do the limited breakdown and differences. Thank You Landon
Yes absolutely love to know the difference between the limited and the late models
Loved the video. Back in my racing days (mid 80s) our engine would be a 4 bolt main stock block. Forged pistons, rods and crank. Motor noted 30 over for a total Cid of 355. Dart aluminum heads crane cam and edelbrock intake. We also had a 650cfm limit. Total cost, parts and machining would be around $6,500 bucks. I real engine professional build and dyno tuned was around 12k.
Man times have changed
Is that the same Rayvon Clark that used used to run dirt late models at 311 Speedway (Madison, NC) and Log Cabin Speedway (Rocky Mount, Va) in the late 80’s and 90’s? Haven’t heard that name in many years! He was from Riedsville.
When will you need to refresh this motor? Yes, please talk more about the limited late model.
Please make a video showing the differences between the cars!
As I'm looking into buying a late model car for my local NY track, I'd be interested in a video breaking down the difference between the 2 and a run-through of your limited late model. Thank you for info, not many people would share what you do.
Harrington’s built the big block Chevy in my street/strip bracket car. Their attention to detail and workmanship is excellent.
Thanks for the insight! Yes, please do a video comparing your LMSC vs your LLM.
Do the comparisons that would be interesting 🏁
I spent $9k on a used(rebuilt) bored out 602 crate. Including accessories and flywheel/clutch for my weekly racing modified(see profile pic). You did alright I'd say.
602s have been increasingly popular here lately!
I'd be interested in a llm video. Just bought one. Brand new to this kind of racing.
Cool to see someone show the behind the scenes info. for people who are not familiar with what you guys are running.
Landon, for the people who might be wondering, what if anything different can you do to your weekly ride versus a CARS Tour car as far as equipment and any rules that are different? Just one example: If the cars tour group was gonna run twins at Hickory, would the 20 lap tire rule apply like it does to the weekly group? Can you do anything different to the chassis etc?
See you Saturday!
Well it is way less than the spec engines they use now in the USMTS series which I believe are around $25,000.00 to $30,000.00. Now the Nascar B mods are around $14,000.00 to $15,000.00. Which I believe the lap count is 1200 to 1300 laps for either one. (Of course, racing on dirt the engine builders don't want the laps going much past that lap of 1200 to 1300 laps)
Yeah some these asphalt guys heads would explode if they knew what we’re spending on top level dirt engines. Heck we’re spending more on engines for classes considered beginner classes than they’re spending on engines for there top level classes apparently
( for those that don’t know for a competitive dirt latemodel engine you’re spending as much to refresh it every 1250-1500 laps as he has in his entire engine)
Yup. I do my own engine work on my b mod and it's a little disheartening knowing you're going up against guys who are spending 15k plus on a motor. Even a new 602 crate is going for North of 6k these days. If more people worked on their own stuff instead of just spending more money the sport would be better for it
Looks like a super T10, as for the transmission, aluminum case and very sought after for early to mid 60's Corvette's, probably around $1500.00 on today's market for muscle car parts, Thank's for sharing man!! Very informative 👍
No problem dude!
Yes that would be great to know the difference between the 2
Great video as always. Definitely look forward to a comparison video.
yep, love to see a video with a LMSC/LLM comparison.
Sweet🤘🏻
You sound like you have your budget under control. Its easy to spend up big. I have built many race cars using your method. Be good to see a comparison between the cost for both cars. Have a good run this weekend.
If you do a video on the crate motor cost, include what it costs to buy from GM plus what it costs to have it Blue printed by an Authorized Engine Builder
I paid $5600 for my crate completely fresh. No flywheel and back half, with pulleys, water pump and fuel pump
Please make a video about the different cars. I think it would be cool to see the differences between lmsc and a limited.
I’ll do it!
Enjoy your videos Landon good luck this weekend you should come up to south Boston and race sometime
what kind of exhaust/muffler setup do you guys run down there? You east coast guys have a very high pitched exhaust sound compared to the west coast of being low & beefy
Love your stuff man
Good luck this weekend buddy!!….we’ll be watching and pullin for ya on FloRacing…kick some ass 👊🏼🏁
Definitely worth a watch, A Comparison would be cool , Your engine for sure sounds bad ass. Thanks for the info stay safe and charge on.
Thanks Kevin!
You have to pay to play and you have done a great job keeping operating cost reasonable. Solid information !
What’s your suggestions to someone wanting to help out on a team doing anything that is needed when they move to the Hickory area from Iowa at the end of May?
Thank you!
Go to the track one week and hang out around the pit area! Talk to as many as you can!
Thank you for the response. I’ll definitely try that out when I get down there. Good luck this weekend!
Your High Rock sponsor will be in the stands. Let do it for Dale JR. Love you bro. Hope you're ducks line up in a row this weekend. Good luck man
Thanks dude! Gonna give it all we got!
Come on over to the Nashville fairgrounds and see how it goes
this was a very informative video, really enjoyed it
Thanks man!
You forgot a few things including headers, y-pipe, muffler and motor mounts (offset, straight up, etc).
Headers are a big deal, depending on ride height rule (does exhaust count to ride height), above bellhousing crossover (looks like yours are not) or straight back, with lower crossover, etc. Headers sizing is another big rule issue, I.e; 1 ⅝ or step headers 1 ⅝ stepped to 1 ¾ or 1 ¾ complete , or if Tri-Y legal or not.
Great info on the cost of the motor. Go get that checkered flag Landon.
A comparison video between late model and limited would be great. Good luck this weekend.
Thanks man!
When I hit the lottery I'll get back into it. I raced a Limited Late Model back in the 1980s. A great time in my life.
i hear you hitting rev limiter, how hard is that on valve springs and how often do you change them? love your channel
Not to terribly hard! Usually once or twice a season
Would like to hear the difference between late model and limited late model
Awesome content/info! Good luck this weekend!
Thanks man!
Awesome video man, very informative! Us gearheads love this kind of shit😂also a video explaining the differences between a LMSC and a limited would be awesome, awesome vid man!🤘🏻
I’ll do that next week🤘🏻
Please...I would like to know the difference..thanks
Please make that video describing the differences between the two classes. I have NO idea!!
Good luck at the tour this weekend.
Thanks buddy!
Where did the hair go bubba lol?? Anyways, thank you for an informative video. This helps people understand the costs that go into this sport. Kickass this weekend bub!!
Hair been gone!
@Landon Huffman I thought you had just brushed it back lol. The hair added to the persona that is The Claremont Kid. Just kidding bub, I really hope you give them boys hell this weekend. You're a helluva wheelman.
Cool stuff...glad I found this channel
Great video. Would love to see the video on differences of a stock vs limited.
Another question tho. What fuels do you run in the race cars?
Sunoco! I’m not sure what the octane is
@@LandonHuffmanRacing is that like a leaded race gas?
Good luck in the CARS Tour race!
Since you’re gonna be around the CARS Tour anyway, maybe a quick differences video between the LMSC and the pro late model? Especially since the pro and super are the same chassis just different engines.
All your videos are great, so keep it up!
I’ve done one of those before!!
Do the breakdown of both… great reference points..
What sucks is the outlay for the price of the car engine and everything you need to go racing is a lot of money for what you get paid by your track you race at
The front desk said there were a total of 72 cars checked in as of yesterday evening.
41 late models and 28 pros on the entry blank
Whered you get the AN style water neck? thats friggin sweet!
You should contact Dale Shaw Race Cars in Center Conway New Hampshire
You forgot the case of brake clean and blue paper towels...
The little stuff adds up to be the most expensive part.
I actually just bought myself a late model race car and I'm going to make it look like Dale senior's race car And I'm going to race it at Langley Speedway.
This is all good info. I am going to start a massive late-model team when I win the mega millions.
Hire me when you do 😂
@@LandonHuffmanRacing Don’t worry, I got you! You will be the future CARS Tour Champion in no time. Now, just to get those lucky numbers..
Sorry so late worked a double,, but what is start time tomorrow??? Thank you for the reply…
Dude your high rock commercial is cool man good job
like to see the break down and difference between the cars?
I thought about 15,500so I was pretty close. You got a good deal for 17,000 motor and transmission etc.
Kinda surprise when you said 500HP kinda thought you all would of had more than that for some reason. Good luck this weekend!
Its asphalt cars are super light gotta get it to ground without spinning the tires unlike dirt
500 is a lot for this type of racecar and drivetrain!
@@broersmaracing8295 uhm the car in the video is 500lbs+ heavier than a ump mod which top cars are hitting 800hp+ now and 700lbs+ on a dirt latemodel which are making 900hp+ now
But asphalt are still on suspension technology stuff that hasn’t been competitive on top level of dirt for 15-20yrs (dead serious)
Informative vid bud, nice.
Motorsport, such a cheap endeavour.
Comparison vid would be cool.
GL this weekend.
engines seem to be the prohibitive factor in running...if you are handy enough, you can take an older chassis and run with it but the cost of an engine kills it
Would like to see comparisons
Will do!
Please show the difference between the 2 cars
A cost to build / run a LLM video would be amazing!!!!
Where do u get the leg rests on the seat ?? I need me a set
Hey Landon quick question about the triple disc clutch setup.. I recently installed a triple disc on our prolate model and followed the instructions to the letter but when we fired it up we keep getting a knocking sound inside the Belllhousing..any ideas? Love the content
Will you have shirts and hats for sale at hickory for the tour race?
We will have shirts!
Great video Landon
Landon. What motor package does Carson and Jr motorsports run?
Enforcer
How did you compare against Dale Jr in the practice
Break down the 2 cars and the cost to run the other car.
Will do!
A yearly budget and weekly budget would be cool.
A LMSC/LLM comparison video would be great.
Yes please, our local track runs LMS and limited
Are the engines bored
So the top 2 division at my local track run 602 in super stock and 604 in pro late
Nice
The comparison video would be a good idea.
I can do it!
I like these videos, I always wonder how much your stuff costs compared to our road race stuff. Is there a Mopar option for you guys? Just curious I'm a bow tie man ;-)
What kind of oil filter do you use?
Great video. My hero, Jack Tant is was the man in my day. Great guy,
Thanks Warren!
Enjoyed the video. Want to hear more.
Heck yeah thank for watching!
This is cool! You get motors two mile from our house! The wife and me still plan on buying you a beer after a race. Assuming you are heading back to the bar in Claremont. All the videos like this are great. I'm sure not many fans understand cost, time and effort you guys invest on your cars. Thanks as always Landon!
Thanks Bobby! Cold beer is good beer!
That was very interesting. Well done. Good luck this weekend.
Thanks dude!
Best of luck this weekend!
How much for the Davis box? 😎
Ready for some North wilkesboro speedway. And my bf ask plz plz if you know anyone in the Allison legacy series tell them get date at north wilkesboro 😊
Id love to drive one of those Legacy cars!
9.95 at walmart?
What does the number 604 mean. Not the cubic inch or horse power? Is it the deck height?
It's the last 3 digits of the part # from GM.
The Ford “sealed” engine is a crate engine but what makes it sealed?
Tamper proof tags on the engine prohibiting access to the internals
Keep up the great content... 🍻🍻🍻
20k used (if you do not have parts around) and 30+ if mostly "new stuff"
Roughly