The ZL1500 now has a full paddle shifted 10spd with rev match!
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- This was a goal that I wanted to have on this build since we started it. That goal was to have a column shift 10spd with paddle shifters. WE DID IT!
Click here to sign the RPM Act (save motorsports)
www.sema.org/e...
Social media:
Facebook: Stangkilr productions
Instagram: justinkeith_sct
Tiktok: Keith_allen
Wear what we wear:
street-car-tak...
Killer Performance KC
www.killerperformancekc.com
justin@killerperformancekc.com
This is exactly what I want. Truck is so sick
It’s pretty damn close to what I want. I want awd turbo with this trans. There’s a floor shifted, (I think) 6spd auto turbo awd on here somewhere but I’ll be damned if I can remember what the guys name is. The motor he says is good for 1500hp as it’s setup. Even if it’s “only” good for a grand, holy shit. Awd Silverado with 1k hp. Disgusting.
Best obs in my opinion such an amazing build!
Looks so sick outside in the sun. What a beautiful truck Justin!
Now that's BAD ASS!!!
Truck just gets better and better. This is one my favorite builds of urs along with the old c7
I love the truck, I had a 92 that I bought right off the lot. Deep red, gray interior, I had the 5 speed, should of got a column shift, it was the "sport" model and it was a sharp looking truck. I had to sell it, help out the family at the time. Watching your videos has got me looking around for one. Keep it up, that truck is a rocket!! 👍😎🍺🍺
Man I bought a 92 when I was 19. I swapped in the interior from a 95, lowered it and swapped in a built a 496 and TH400. Man I loved that truck, but at 21 I became a father, somethingI wasn’t ready for and had to sell it. I’ve had other builds since then, but I’ll always miss that one the most
That obs is freaking clean dude!
Awesome Justin! Gonna snag a shirt! Thanks again for putting out these awesome videos. Excited to see more of that TRX
Awesome build glad to see the paddle shifter in with the column shifter❤️👍🏼🔥😎
Get you a bad a$$ ZL1500 shirt while supplies last!
Awesome truck. Literally my dream truck 🛻. You guys built the ultimate truck. Wouldn’t change nothing on that bad boy.
Need to set the paddles up so when you pull both of them back it drops into neutral to rev the engine, or when you pull both paddles back it acts as a 2 step for launching. Nice build!!!
Mint!!! I love it, keep the videos coming!
"BAD ASS" calling from Southern California. Sweet !!!!
I see this truck everyday to work. It’s so beautiful
F ya! You guys are badass! Nice build man! Wow! Truck badass too! 🍻 cheers to the new paddles rev match! Sofakingcool!
Mind blowing truck justin! Kudos on this stellar build up. Excited for the next build.
hi mate.. Nice vedio.. im doing the same thing with 6l80e.. did you connect the PCS moduel blue wire to 6l80e pin7..? im bit confuse.. also how do you get in to sports mode.. just tap the down shift while in D posision..? thanks for the help
Were u able to get this working?
Okay love the truck but the Saleen on the lift in the back in the begging of the video is gorgeous.
Dream build 🔥 this truck is sickkk
Hell yeah, that is beautiful!
I’m in love 🥰🥰🥰
All i can react with when i see the truck is 😍😍😍😍😍😍😍😍😍😍😍😍😍
Now that’s a dream truck
Perfect keep em coming
That has to be the best , most fun driving obs in existence so far . Ordered the wife and myself a ZL1500 shirt plus I ordered me a Killer performance shirt . When's the next obs build start ?
Very soon!!
Badass obs🔥🔥🔥
1987-1995 GMT400
Bro badass! Hope I see this thing smashing shit on the streets.
Brought a z1500 shirt 🔥
Its on the way!! Thank you.
Man one day when I have enough money, i want yall to build me one just like that. Killer setup!🙌🏼🙌🏼
Let me know
Dude tell me how much and I will bring my truck one day
I was looking for this comment
@@StangkilrProductions
Will you pick it up from 7 states over and load up all the nos parts and more parts,and then of course more parts??
Those paddle shifters are slick!
You don’t need a sign outside your business just look at the parking lot 🤣
Where can i buy those paddle shifters and harness?
Psi conversion
Buddy of mine g Naron on here has a paddle shift setup similar to that. Pretty bad ass, gotta get that ac back in for the win!
If or when you do zr1500. You should do zr1 door panel and seats to complete the look. Just something different than the other obs out there. Not that there is many lt5 obs trucks out there though if at all.
Bad ass bro great job on truck.👊💯
My son rocky says you should have a gear selection display and I agree please make corrections thank you in advance! Lol awesome build
That thing I'd sick love it
Another goal is too test the 160mph Dakota digital speedometer👀👍🏻
Cleanest build on TH-cam easy!!! I’m buying a shirt
That's a little extreme but definitely the best obs and it's a beautiful
@@freedomfox8183
Well, he's not that far from the truth.🤷♂️ I mean who else has one with the attention to detail, and did what he's done or better?? Now he's added paddle shifters, I don't know any OBS truck with them. Correct me if I'm wrong, and I'll stand corrected. 👍💯
Man what beautiful truck
Huge fan of what's been done here!!!!! Best of 21' thus far!!!!!
Great work....a well thought out build....SOOO what`s next
Another one
Can you give the name of the paddle shift company?
Does it make since to buy something like this for a 4l80? Just a 5 speed
such a badass truck!
Does Holley support this 10 Speed trans yet? I like the Terminator X platform for tuning the engine.
Not really up to date on watching the videos, they just popped in on my recommended but nice truck and great work I have the same model just a ‘91 step side! By any chance though will y’all be making any more of the shirts in a size Large?
Does your Dakota Digital Gauges display the gear selection with the paddle shifter?
Was wondering the same thing
beautiful truck. I have a question Im doing the same setup in a 87 box chevy and was wondering what gear ratio did you go with on the rear end I hope you can help ....
Watch the full build vid I'm sure he mentions it
Can I get a link to those paddle shifters
I have a 97 obs with l86 8l90 can you share where you purchased the paddle shifter
I'm in love!
Where’d you get the paddle shifters from? I’m doing a similar build with my c10
Hey I have a 2019 ss Camaro set up putting it n a 78 Malibu lt with 10speed Tran how can I do tha Paddle shifter
Mind if I ask who makes the paddle shifter setup? Badass!
Not sure who is the actual manufacturer is but zero gravity performance has them for about $550 which I think is the cheapest I found them for my 6l90e
@@MrJayo73 Thanks for the info!
DANG
The say that ten speed shifts faster than pdk. Awesome job
I would love to see a build on a procharged 540 cubic inch Big Block and 10 speed automatic
Holy shit I didn't know Nick Swardson was into Chevy Trucks!
Who makes that paddle shifter kit? I would love that in my 71 C10.
That's what I want to do to my truck. Would be pretty awesome if you could do launch control like the new vette
What a Beauty what brand the steering wheel
Where did you get that shifter from?
Now if we can get a 8L90/10L90 behind the Gen3&4 SBC (LS) LR4/LM7/LQ4/9, LY2, LY6 etc in GMT800
Badass!!!
Is there a way to get a gear indicator to work with the gauges?
Who makes those paddles?
Did you have a car show outside your shop today ? Lol I saw some people and the truck while going to oak grove 😂
Sure did lol
Damn how many obs trucks do you have??
I'm installing a LAS with a 6L90 I'm having a problem with the shift linkage I cant seem to find anything they sell to use my original shifter any ideas
Lokar makes a kit
@@StangkilrProductions Thank you
Will a 10spd automatic work on a 351w
What lights are those ?
CAN U TELL ME THE WHEEL AND TIRE SIZE ON THE GREEN TRUCK PLEASE SIR
Can Stop by a drool over this thing if it's in the parking lot or is that not cool?
What shows are tomorrow in KC?
Anybody know the brand of paddle shifters they used ??
Send me the info on the shirt and hat not coming up on my page Thanks. Thats a bad ass truck.
This fucking 🛻 is dope!!!!
When you get the ZR1500 done I want to see you take it to Pennsylvania and race Mike (streetspeed717) with his ZR1
I can do that!
Chevy power 🔥
You should over haul the interior and make it brand new too.
Hell it is new! Lol.
Honesty you can go out and buy an interior. You can’t just go out and buy a perfect original interior.
@@StangkilrProductions yea it's very clean not saying that but I mean like zl1 seats and stuff like that. Like a 2000's style just like you did the suspension the engine bay and all that stuff. That entire truck is a camero other than the interior.
Does the rack and pinion have slop or does it feel tight?
Feels right
wow 😍😍🙌👌👌👌
What shows will you be at?
That’s🔥
😍
How much have you put into it
Dude I want to shirt ASAP how can I get it
I want this truck so bad lol 😅
Is that a 4 eye Saleen in the background??
Yes 1985 super clean and rare
What would be your number to get rid of it? Not interested just curious
🤣🤣🤣🤣 Since it's over 100k in it, you can probably start after that!
What is the paint code???
I wonder how much all of this cost . PLZ let me know
Who makes that steering wheel boss ?
Billet Specialties
I want to do this on my 6L90 swapped LSA Nova. Is that a PCS paddle?
It is!
@@StangkilrProductions I thought that the PCS could do all of the controlling. What difference did the Speartech make?
@@cannonfeet I just bought it through Speartech
Whats the 60-130 on the ZL1500?
Not sure yet. If i were to guess mid 5’s
What drop kit does it have?
Or what drop you recommend for a obs
Who sell them??
I wonder could U have paddle shifters if U have like a racecar popp off steering wheel 🤔🤔🤔
Hi , just wondering how you got it to rev match ? Any mods to the tranny to make it happen ?
It’s in the factory ECU when commanded to tap shift
@@StangkilrProductions oh damn. You aren’t running a different Trans controller
What stall are you running
Man what was that dude from Tim toc name again ? He had me crying !!
Yaden Auto Sales