Loopback Configuration in OLT | Loop back issue resolved |

About :
A loopback issue in an OLT (Optical Line Terminal) can occur when a network device receives its own transmitted data and mistakes it for data from another device. This can cause network issues and errors. Here is a general process for configuring a loopback issue in an OLT:
1.Connect to the OLT: Connect your computer or laptop to the OLT's management interface using an Ethernet cable.
2.Access the OLT's management interface: Open a terminal or Telnet client and enter the OLT's IP address and port number to access the management interface.
3.Login to the OLT: Enter the username and password for the OLT's management interface.
4.Verify the loopback issue: Use the appropriate command to verify the loopback issue and the status of the interfaces.
5.Configure the interfaces: Use the appropriate commands to configure the interfaces and resolve the loopback issue. For example, you may need to disable or remove the loopback configuration on one of the interfaces.
6.Save the changes: Apply the changes and save the new configuration.
Note: The exact steps and commands for configuring a loopback issue in an OLT may vary depending on the OLT model and software version, as well as the network configuration. If you have difficulty accessing the OLT's management interface or resolving the loopback issue, contact your service provider or a network administrator for assistance.
|
More Video's Details :
Please Like and Subscribe to My Channel :
/ @mtnetworksolutions
More Video's Link
EPON OLT Configuration :
• epon olt configuration...
GPON OLT profile Configuration :
• gpon olt profile confi...
All OLT Configuration :
• EPON AND GPON OLT CONF...
All ONT Configuration :
• Sharp Vision ONT Route...
Thanks for watching My channel

[@AzaadAafreen]

Ap bohut achha sikhate hai

[@mtnetworksolutions]

Thanks for your comment

[@KashifOfficial25]

Sir same settings se 1 onu pr loop issue aya baqi all onu ka net kun off ho geya olt mean onu online show ho rahe han lkn internet block ho geya ha sab ka wo onu band keya ha to okay hove han all onu

[@zainulabdin77]

Sir ONU Main kaise loop create kiye

[@mtnetworksolutions]

loop configuration olt side hota hai

[@VIDEO0791]

Sir Mac se customer ko kese trace karne
Agar olt mein loop ban raha hai

[@mtnetworksolutions]

onu list pe jake uske badd onu number mac list me show krega

[@vikash1920]

Can anyone help to create backup link network...means My OLT-4 GE1 port is primary uplink & GE5 is backup wireless link.
If my GE1 uplink port goes down then my GE5 Uplink link should automatically up without creating any loop.

[@mtnetworksolutions]

Yes it can possible

[@vikash1920]

@@mtnetworksolutions how

[@vikash1920]

@@mtnetworksolutions provide your contact details

[@syedmehdiiqbal4177]

Sir g3 g4 se Mera media chalra ha tu wo identify kesy karein

[@mtnetworksolutions]

Coordinate with your internet service provider he will guide you.