Перед тем как ставить это колесо на машину и ехать нужно: 1. Сходить в церковь за отпуском всех грехов. 2. К нотариусу, составить завещание. 3. Попрощаться с родными и близкими.
Something is funny here. An aluminum rim suddenly became steel so that you could weld it to a chunk of steel? Why not just use the steel rim to begin with instead of the charade of claiming you started with a broken alloy?
Didn't realise it was so easy to do? And with an arc welder too? I'm gonna bring my complete set on my car and van now I know you don't need a tig welder? Maybe I could use loggers aluminium tape instead of an arc welder? That way it would be chromed up already? 😅😂😅
Then, on the autobahn, at a speed of 130-160 km/h, the disk will fall apart due to internal stresses from welding, and the car, having turned over several times, will end up broken in a ditch, with the driver and passengers dead! It’s not for nothing that the disc is made completely solid or cast!
Oh there is one of the policemen happy rim and tires without ABE!? Not balanced. Then removing a parking claw, theft? And they are also artists, they have mastered the welding connection between steel and aluminum, which is even more top gas, sealing welding in the saliva and in the rim
If you're planning to make all those modifications any way, why bother destroying one perfectly good rim just to fix the other and then make all kinds of modifications. That's a waste of a good rim.🤨
At this stage you could have found a more entertaining way to risk your life without risking lifes of others too. Not everyone should be allowed to have access to the tools.
Nothing about this makes sense. Why don't you pay your parking ticket? It can't cost more than all that trouble. Also, those wheel locks are pretty easy to defeat - there's a video that shows how.
Perso, je trouve ridicule et inutile cette facon de faire. Remplacer la jante est plus simple au lie de "se la prêter " il montre seulement un ego surdimensionné. 😅😅😅😅
Волшебник, к алюминиевому диску привалил кусок стального.
я вот тоже этот момент непонял, а потом еще стальные спицы приварил в алюмишку
Это сначала был стальной самопал из профтрубы, только зачем он переносил кусок диска с другого, видимо просто по приколу
Перед тем как ставить это колесо на машину и ехать нужно:
1. Сходить в церковь за отпуском всех грехов.
2. К нотариусу, составить завещание.
3. Попрощаться с родными и близкими.
Something is funny here. An aluminum rim suddenly became steel so that you could weld it to a chunk of steel? Why not just use the steel rim to begin with instead of the charade of claiming you started with a broken alloy?
Is called transmutation. The dream of the old alchemists to transform one metal in other metal. Preferably in gold.😂😂😂
он не был алюминиевым. старый обод был сделан этим же человеком, чтобы тот выглядел как литой диск
It was another modified steel wheel he made in an earlier video.
Didn't realise it was so easy to do? And with an arc welder too? I'm gonna bring my complete set on my car and van now I know you don't need a tig welder?
Maybe I could use loggers aluminium tape instead of an arc welder? That way it would be chromed up already? 😅😂😅
I was watching & I'm like wtf?
Driving on this rim is a death wish
and then you have a perfect balanced wheel!🤣🤣
You gotta be kidding me.... Why do some people work harder instead of smarter?
You can't teach stupid bro 😂
Radius bone look like small but can trust 👍👍
Jesus. I'm a welder by trade. And if this guy handed me a wheel that he made I would definitely say no thanks.
Thats the magic of you tube
Then, on the autobahn, at a speed of 130-160 km/h, the disk will fall apart due to internal stresses from welding, and the car, having turned over several times, will end up broken in a ditch, with the driver and passengers dead! It’s not for nothing that the disc is made completely solid or cast!
With Siberian greetings👍❄❄
Topzera demais 👏👏👏👏👏👏👏👏😜
Really Awsome built From street Scraped Wheel to Mad Max rims..
Thanks for the awesome comment!
Штраф стоит 10 $ а угробил колесо с резиной на 300$ .
Просто гений
Jajaja este video es serio ? O es pura broma ? 🤣😂🤣😂
Ugyan milyen sebességnél rázza szét az autót? Mert kiegyensúlyozásnak nyomát se láttam.
Why cut a perfect wheel you could have used instead of going the unnecessary (doing way too much) route of repairing that
А зачем диск то варил протертый об асфальт???
Только время потерял,смотреть такой бред.🤯
0:04 bro what did they do to a perfect rim?
Se saltó vários pasos al soldar los rayos, etc. Y el balanceo? 🤨
Tohle video je jako z pákistáncké dílny v Kandaháru.
You tube magic, wave your hand, plastic becomes steel, you know the deal.
А не проще ли было бы, поставить точно такой же диск, взамен порезанного?
Он посчитал что это круто👍
i think the wheel wont stay for long. anything welded on the car that has to do 100s of kms is a no no
To už je levnější zaplatit pokutu a zamyslet se nad sebou co dělám jako řidič špatně 😂😂😂😂
Más barato, sencillo y sin tanto cortar y soldar.... saludos desde 🇨🇷
Y no era mejor usar el fin completo?
and someone get this guy a tire machine. I think he earned it
１輪だけホイールを改造してみたってことでしょうか？
スポークホイールは売ってますよね？。自分の車にはサイズが合わなかったのでしょうか？
ここまでしてやるかな？の感じがありますね。
😂🤣 juste une question. Qui a remarqué la coupe net du pneu 😂🤣👍😉 c'est pas l'avant c'est l'arrière 🤣😂👍
Меня зрение не обмануло🤔он кусок металла приварил к аллюминию🤔🤔🤔... 🤣🤣🤣🤣🤣🤣
Так он снимал заднее колесо, а поставил на переднее
Рваную покрышку не выкидывай, пакистанцам отнеси, они ее заштопают, как новая будет.
Why didn't he just change the tire 🤔 after he cut it? Although I really like the other wheel 😎 artist's hands 👍
สงสัยมีเวลาว่างมาก😂
Ты сколько проехал с каблуком😂
That video is just for fun guys.
You just can just buy some . If it's so long to make the spike rims
For the amount of time and resources used to do you could have got four new wheels for far less
Почему не отрезать аккумуляторной болгаркой локер на месте блокировки? Купить этот инструмент дешевле, чем так извращаться.
Он не из России😂
Oh there is one of the policemen happy rim and tires without ABE!? Not balanced. Then removing a parking claw, theft? And they are also artists, they have mastered the welding connection between steel and aluminum, which is even more top gas, sealing welding in the saliva and in the rim
Silly humans 😂🎉
All this, instead of paying to have a wheel clamp removed.
Sensible??
I didn't see the other rims😂😂😂
bastava dire ho' bisogno di un'altra ruota! e ti veniva regalata,
Pra que o cara come o ferro do aro, só corta e fazer o negócio personalizado logo, vai corta outro pra solda, cada bobagem.
Should've just used the spare wheel
Maybe he is a designer for autoworld ho slot car wheels...lol
You could just use the yellow one instead and make the cooler wheel, but i see you are a try hard type lol.
Comprar uma roda nova é MUITO MAIS BARATO E SEGURO!!!!😅
👍🏼
you turned a diy wheel into another diy wheel
Биение есть, хуже заводских.😅
Я что то пропустил,наверное, приехал делать заднее колесо а поставили переднее
Better replace it with the Stepney
If you're planning to make all those modifications any way, why bother destroying one perfectly good rim just to fix the other and then make all kinds of modifications. That's a waste of a good rim.🤨
Hey heres a really odd thought maybe dont park where your not supposed to 🤯🤯🤯🤯🤯
Von Alu zu Stahl oder wie 😅😅😅
Un carrito abajo.
sketch af but I like
Класно
Is it a joke? Is more easy replace the weel
At this stage you could have found a more entertaining way to risk your life without risking lifes of others too.
Not everyone should be allowed to have access to the tools.
Wouldn't if have been easier and cheaper to just pay the parking ticket???
انت الان خسرة امثر من قيمة المخالفة
Demasiado trabajo y gasto mucho más dinero por no querer pagar una multa.
Мамкин инженер, сопромат? Не а не слышал.
What an incredible amount of work for unbalanced, ugly wheels
Колесо провалилось в текстури
Más barato salía pagar la multa.
DIYよりあれで走行してきたことの方がビビるんだけど、、、あるあるなの？？
а ничего что они по высоте разные былли
Постановка, всё видео сплошная постановка.
Nothing about this makes sense. Why don't you pay your parking ticket? It can't cost more than all that trouble. Also, those wheel locks are pretty easy to defeat - there's a video that shows how.
😂😅🤣😂
Мда, взял и испортил диск
Редкостная поебень. Покрасить суриком и выкинуть за борт.
Железа и дюралюминий сварил🤦♂️🤦♂️🤦♂️
Так делать НЕЛЬЗЯ !!!
Что за чухня?
Total Security 👎👎👎
И сварщик так себе...
Шляпа 😂
만든놈도 겁나서 제자리에서만 타고
도로 뽑아 놨네ㅋㅋㅋ
Noo salir caputo seguro espieza
そもそも違法行為が原因と言う設定なのよね？
黙って反則金を払いなさい。
誰がどう考えてもそのほうが早いし安い。
リメイクのアピールならばシチュエーションを考えなさい。
Perso, je trouve ridicule et inutile cette facon de faire. Remplacer la jante est plus simple au lie de "se la prêter " il montre seulement un ego surdimensionné. 😅😅😅😅
A load of rubish.would not put that on a push bike. impossible build
dzban nr 1
😂
На хрена изобретать велосипед? Колхозить
Don't know why I wasted my time watching this crap!
Оно кривое😂😂😂
Задорнов был прав
Wtf
Netter Versuch andere Leute für dumm zu verkaufen.
👎👎👎👎🤣🤣🤣🤣
что это за дерьмо
Crap waste of time.
Te sale mas barato pagar la multa...