The first amplifier I ever owned was the "1000 watt" lanzar max. Got it off Amazon and hooked it to a couple p1 12s and it sounded ok. Opened the manual and it did 75 x 2 rms. Then I got a punch 550.2 and have loved everything RF since.
If you notice on Rockford fausgate amps they don't rate a max they always rate them lower but then on the birth certificate inside the box with the paper work they do. Like the box will advertise 300 watts but the birth certificate will tell you the real power like 1000 watts. I wont buy nothing but Rockford fosgate or Harmon kardon
Not the old school Lanzar I know! Should be a crime to ruin a name like this...and such a big lie to the consumer. BOOO Lanzar!! Great test and keep those mfg's honest!
Nicholas Cortez fairly legit you 100% legit. the opti drive series even the woofers are 2000 w rms and the amps alway up to 10k rms .you tube opti drive lanzar and get npressed
I have a lanzar vibe266-1 it blew instantly and it's identical on the inside the cheap 10g wire fake fuse holder and I was disappointed because my friend had the optidrive series from the 90s and that's one of the best systems I've heard It's upsetting the way things are nowadays I pondered on what to buy for a long time I went with skar audio RP 1500 and I haven't looked back looking forward to buying some of their subs now.. thanks for the videos you make everybody a good guideline to go on for buying equipment thanks a lot..
I am Coast2coastLoud that is possible as long as you assume that it is only making a third of its power or less and you don't want it to last forever you can do that with anything but by the time you pay for 3 amps to do the job of 1 you could have bought one good amp for the same price if not cheaper..
wow that sucks. i would have guessed that Lanzar would come close. I will not be buying Lanzar amps anytime soon. any chance on testing other budget amps like BOSS and SSL, Lightning Audio etc. i would see what they do.
I have the same amp but it's the 4000 watt amp. So I should think the 4000 watt amp is about 400 watts max? I'm running it in stereo right and left to two 12s in my house it's sounds pretty good. I was thinking it's probably a 300 watt amp.
+The Amp Lab Im not familiar with car audio,, but please help me out with this: why the DB Drive 10K amp is 8X more expensive than the Lanzar 10K one? Please take a look and tell me if it's worth spending 8 times more for the same amp. DB Drive amp: dbdrive.net/product/a7-10k/ Lanzar: www.hifisoundconnection.com/Lanzar-OPT110001D-Monoblock-Class-D-10000-Watt-1-Ohm-Stable-Power-Amplifier-LNZ13-OPT110001D
Can you test a ssl dg41200 pls I got one and wana know if it's really putting out 1200 watts which I doubt but it's a four channel Idk if u do 4 channel amps.
Do you have any suggestions on where to learn about amp diagnostics? I have a Kenwood KAC 9106D that powers up but has no output to the speakers. It's driving me crazy. I've had that thing apart three times trying to find the malfunction. Love your videos.
I have sold Lanzar Pyle Pyramid Legacy since the early 90's. The parent company is Sound Around out of Brooklyn NY. We sold this brand because of price points. Defect rate was pretty high. The plus to this company from our point of view has been customer relationship. Can't comment on individual customer service. We could get credit or new replacement no questions asked. Product quality has always been questionable. We have since moved to other brands. We do continue to carry other products from them such as accessories Power supplies etc. Since the internet boom e-commerce etc competition has driven many companies buy cheaper and produce cheaper. Everything comes from China. The old saying you get what u pay for is always. True, Always do your research before putting any aftermarket product into your vehicle. Don't let great deals marketing influence your purchase. I have been working and installing car audio for over 30 yrs. I have seen a lot of crazy stuff like this. Always remember they are trying to take your money period. If u give it to them make sure you are getting what u pay for.
i suspect it was a build defect on the fuse holders also the fuse was costing you voltage for a proper test 1 pair of wires should be soldered to the other holder and use 2 fuses i dont expect it to do much better, but it wont smoke
The Amp Lab and that is not to due to low quality builds like this amplifier? like the technology itself is bad even from good manufacturers? I don't mean to sound cocky, i just want to make sure that im on the same page as you.
volkswagenginetta There are a few good ones. Rockford used one for a while with set screws instead of friction fit. But most eventually loosen and have issues.
THD means total harmonic distortion I believe and that sucks when they run big number amp fuses when doesn't require it ,, must be a new marketing strat
Did that amp run 675 rms at 14 volts? Its still a shitty amp but the price is good. I have a kenwood 600 max and 300 rms bridged at 4 ohms.. should i stick with the kenwood or will this one have a bit more power bridge
I look forward to your videos, right up there with BigDWiz... To bad Steve Meade stopped doing amp test Tuesday. Oh well no more views for him or his channel.
here is one review from sonicelectronix lmfao "I just bought this amp and I really didn't know what I was getting cause its a little small for 5000 watts but the fuses in the amp sold it for me 2 70 amp fuses wow!!!! I'm powering two 12 inch lanzar max pros and my blazer pounds so if you have a sub that can handle a lot of power this amp is great for the price. I think I'm going to by another one just for fun. Can't beat it I love it!!!!"
That is so deceitful doing that to consumers, it also adds to bad reviews on a brand that ruled the car audio scene back in the 90's shame on you lanzar suckie indeed
Man, you gotta use a setup that's putting out 14.40v or close to it. All of these amps rated at that power level are pretty pointless to be tested in the 12 volt range. It's really misleading.
very nice test.... i have 2 friends have the same amp. and then belive this amp do more than 1,000rms hahaha can you do a test at lanzar vector 5000?? is a bit differente board!! i think do lika 900rms.... if is possible! thanks!
I recently bought four of these subwoofers but now I need a good Amp to push them.What would you recommend for them?I've searched every where and asked everybody and can't nobody seem to help me.You are my last hope.Help me please!!!!!(Pioneer Champion Series PRO TS-W3003D4 2000 Watts Peak Power, 12" Dual 4 Ohm).
Wonder if Lanzar lost there CEA partnership due to all the POC stuff like this one... I had a look on their website, and I don't see any CES compliant equipment (at least not int he amplifers)... The CES webpage lists them as a partner too... ROFL
Hi. May be the second fuse part is suppose to be to store a spare fuse. May be the amp is suppose to run with just the one fuse! MMMMMMM! Just a thought.
One thing to point out! Always only buy CE, CES or CEA compliant car audio! This means you will get everything stated! Stop helping the Black Market car audio manufacturers! Selling Knock-offs with Quality names tied to them! This is White Van car audio! Designed to get big sales and not gain any Competition status or wins for their records! Lanzar used to design their amplifier boards in-house especially with the 50c and back then a name was a promise for quality!
There's actually the many amplifier companies doing well over rated specs that are not CEA rated. I see CEA ratings as more of a marketing ploy than actual results. The tests are pretty vague. (Ie all tests are at 4-ohm) and the manufacturer gets to pick the sample to be tested. I just ignore it for the most part myself.
More working fuses mean more current gets to the billion FETs which in turn will stop the single fuse from melting and bubbling there's way too much current draw form all those parts on a 80amp maxi apparently they forgot to add jumpers or wire
After watching this video for the second time, I have a theory about the "spare fuse holder". I'm thinking you got a bum amp that should have been labeled as B-stock. I see four wires coming off of the one fuse terminal. I'm going to guess someone in production didn't do their job properly, got lazy and either soldered one fuse holder to all four wires instead of 2 wires to each fuse holder, or there was a malfunction with something on the assembly line and this amp (along with others) was set aside to be "corrected" and was just made to work to get it out of the factory. I only suspect this because I've worked in manufacturing and stuff like that happens a lot more than I care to admit. I'll just say this . . . if you buy a box of 6 donuts and the total package size of the entire box says "12 oz", that would lead you to believe there are 6 donuts that weigh 2 oz each right? Well, not always. As long as they all, together, weigh 12 oz, that's all that matters. Has anyone ever opened up another one of these amplifiers to confirm this is normally done?
The only problem with that theory is that if both fuse holders and both fuses were meant to be used, then under the heavy load I put the amp through the single fuse should have blown (Because it would only be half of what the final fuse rating would be). It would have been too much for the single fuse to handle. Some amps I test even blow there fuses under a very heavy resistive load with the correct fusing in them. So only having half certainly would have. I really think this is how it was meant to be.
The Amp Lab I never said having both fuses working would increase the output of the amplifier. LOL The amplifier still does nowhere near rated. I'm not denying that at all. I just don't agree with the assumption that the intention was deception by using a dummy fuse. I'd be willing to bet a 6 pak that if someone were to open up the identical amplifier the guts would look different.
I never mentioned it putting out more power. I think you misunderstood what I was getting at. In either case, I am betting 2 12 packs that every amp of this model would look exactly like this. They did not screw up this one amp I would bet money on it.
I'de like to see how the Kenwood KAC-9106D 2000 Watt amp performs. Its pretty close in price to these complete BS amps. also any power acoustik amps as well just to see how overrated they are.
pathetic really, these are the types of amps i hear about all day and bite my tongue to stop from telling them what useless paper weights they are. lol
+The Amp Lab Though I do believe this amp to be severely overrated .... I believe this test isn't accurate .....The fact the fuse was getting so hot showed there is a severe restriction on power to the amp.... Obviously if the power was being restricted, this would hinder the power performance of the amp... Were there two maxi's in there from the factory or did it come with 1
hey whats up man. i just purchased a lanzar mini max MNX 5000D just wondering if u can do a amp test on it I'd like to know what kinda paaa Waaaa it pushes . you can email my user name at gmail . com and we can set up the shipping..
I love your amp tests man. Keep up the great work!!
Thank you
I have a lanzar vector 3100 that I've been using for almost 10 years it still bangs hard as hell.
The first amplifier I ever owned was the "1000 watt" lanzar max. Got it off Amazon and hooked it to a couple p1 12s and it sounded ok. Opened the manual and it did 75 x 2 rms. Then I got a punch 550.2 and have loved everything RF since.
If you notice on Rockford fausgate amps they don't rate a max they always rate them lower but then on the birth certificate inside the box with the paper work they do. Like the box will advertise 300 watts but the birth certificate will tell you the real power like 1000 watts. I wont buy nothing but Rockford fosgate or Harmon kardon
Not the old school Lanzar I know! Should be a crime to ruin a name like this...and such a big lie to the consumer. BOOO Lanzar!! Great test and keep those mfg's honest!
I miss the days when the power advertised was rms.
Joseph Stalin And at 12.5V or less as well not 14.4V
+Dereck BigDWiz The new OptiDrive Amps are still fairly legit but they aren't made by sound around.
Nicholas Cortez fairly legit
you 100% legit. the opti drive series even the woofers are 2000 w rms and the amps alway up to 10k rms .you tube opti drive lanzar and get npressed
BigDWiz lanzar didn't do rated either....I was so crushed to see you Dyno the 50c and it not do rated..my dream amp is just a dream
I have a lanzar vibe266-1 it blew instantly and it's identical on the inside the cheap 10g wire fake fuse holder and I was disappointed because my friend had the optidrive series from the 90s and that's one of the best systems I've heard It's upsetting the way things are nowadays I pondered on what to buy for a long time I went with skar audio RP 1500 and I haven't looked back looking forward to buying some of their subs now.. thanks for the videos you make everybody a good guideline to go on for buying equipment thanks a lot..
Absolutely the best test ever that is exactly how you expose the bullshit.
Damn a dummy fuse now I have seen it all
i am really enjoying your videos especially the amp tests and the sq vs hifonics brz comparison.
Thank you!
I got 10 of these running my killer boss subs and I love these amps
I am Coast2coastLoud that is possible as long as you assume that it is only making a third of its power or less and you don't want it to last forever you can do that with anything but by the time you pay for 3 amps to do the job of 1 you could have bought one good amp for the same price if not cheaper..
will you do a test on the Lanzar Opti drive?
Thank you saved me a lot of money and shipping charges
Thanks for the heads up, can't believe a phony fuse smh.
First viewer. Please include amp draw on your tests. That is important to a lot of us.
A real current shunt style meter is in the works, not a clamp (Not very reliable on DC voltages)
I'm wondering If the new Vibe series have the same crappy design with the that fuse shit.
Pretty simple rule of thumb is fuse rating to get a ballpark . . I have JBL BPx2200.1 and externally requires a minimum of 190 amp fuse
wow that sucks. i would have guessed that Lanzar would come close. I will not be buying Lanzar amps anytime soon. any chance on testing other budget amps like BOSS and SSL, Lightning Audio etc. i would see what they do.
can you amp test the audiobahn A2300HCQ looks just like the HCJ and the HCT can really find any good info on them
I have the same amp but it's the 4000 watt amp. So I should think the 4000 watt amp is about 400 watts max? I'm running it in stereo right and left to two 12s in my house it's sounds pretty good. I was thinking it's probably a 300 watt amp.
do you still work on amps haven't seen any new content
So what was the rms at 14 volts. 600? At 4 ohms bridge?
Good Vid sir!
A Lanzar rep should get in contact with you! I'd love to see Dave Jones from EEVBlog rip this thing apart oh boy i can hear him now.
Haha Dave is great
what about the Lanzar Audio VCT2610 6000W 60A 2 Channel Car Amplifier
There is nothing like the anticipation for "FAILURE" HAHAHHA awesome man!
hey what about Lanzar Opti 7000D? are these good? plz answer when you can
Opti series have always been pretty good!
+The Amp Lab Im not familiar with car audio,, but please help me out with this:
why the DB Drive 10K amp is 8X more expensive than the Lanzar 10K one? Please take a look and tell me if it's worth spending 8 times more for the same amp.
DB Drive amp: dbdrive.net/product/a7-10k/
Lanzar: www.hifisoundconnection.com/Lanzar-OPT110001D-Monoblock-Class-D-10000-Watt-1-Ohm-Stable-Power-Amplifier-LNZ13-OPT110001D
I'm a Refugee if you ever buy lanzar the opti series is the best
Can you test a ssl dg41200 pls I got one and wana know if it's really putting out 1200 watts which I doubt but it's a four channel Idk if u do 4 channel amps.
Can you link the top one to the bottom one
I'm actually impressed it made ~500w. Plus it comes with a spare fuse...what a bargain!
What about the lanzar vibe 2102n? And the entire vibe series?
Any advice on an a good amp that is 1 ohm stable at about 2400 watts rms? I've seen your hifonics video but any other amps?
ProneToInfection Skar Audio check them out.. I have one and I love it..
Hey. What approximately fair power will be lanzar mxa 244?
Do you have any suggestions on where to learn about amp diagnostics? I have a Kenwood KAC 9106D that powers up but has no output to the speakers. It's driving me crazy. I've had that thing apart three times trying to find the malfunction. Love your videos.
bcae1.com
copy. thanks.
I have sold Lanzar Pyle Pyramid Legacy since the early 90's. The parent company is Sound Around out of Brooklyn NY. We sold this brand because of price points. Defect rate was pretty high. The plus to this company from our point of view has been customer relationship. Can't comment on individual customer service. We could get credit or new replacement no questions asked.
Product quality has always been questionable.
We have since moved to other brands. We do continue to carry other products from them such as accessories Power supplies etc. Since the internet boom e-commerce etc competition has driven many companies buy cheaper and produce cheaper. Everything comes from China. The old saying you get what u pay for is always. True, Always do your research before putting any aftermarket product into your vehicle. Don't let great deals marketing influence your purchase. I have been working and installing car audio for over 30 yrs. I have seen a lot of crazy stuff like this. Always remember they are trying to take your money period. If u give it to them make sure you are getting what u pay for.
Dam right get the dual da600.1or da800.1!!!
Can you please test the Audio pipe APCL3000.1D I HAVE 2 ON 2 SOUNDQUBED HDS4 12S. . I HAVE A GUY SAYING THEY might put out 2000
hey could you do a amps test on a jensen amp? preferably the power series. thanks keep up the work!
i suspect it was a build defect on the fuse holders
also the fuse was costing you voltage
for a proper test 1 pair of wires should be soldered to the other holder and use 2 fuses
i dont expect it to do much better, but it wont smoke
What amp would you recommend for two two ohm Rockford fosgate punch p3 15" I have a Hifonics Zeus 2400 watt mono amp but it needs more power?
can u test amps akai 1200 watts pls ?
how come maxi fuses are bad? my pioneer gm-d8601 has them and i saw now problems. (granted im only running 300 watts rms but still)
They are common to suffer from loose connection to the fuse, which causes heat and causes the fuse holder to melt.
The Amp Lab
and that is not to due to low quality builds like this amplifier? like the technology itself is bad even from good manufacturers? I don't mean to sound cocky, i just want to make sure that im on the same page as you.
volkswagenginetta There are a few good ones. Rockford used one for a while with set screws instead of friction fit. But most eventually loosen and have issues.
The Amp Lab alright thanks for explaining it out for the average yokel. i appreciate it.
THD means total harmonic distortion I believe and that sucks when they run big number amp fuses when doesn't require it ,, must be a new marketing strat
Did that amp run 675 rms at 14 volts? Its still a shitty amp but the price is good. I have a kenwood 600 max and 300 rms bridged at 4 ohms.. should i stick with the kenwood or will this one have a bit more power bridge
The 5:07 mark was the funniest thing i heard today ;;YES THAT IS SMOKE COMING FROM TE FUSE HOLDER:: Lol...
Could you review the Lanzar Opti Drive?
I look forward to your videos, right up there with BigDWiz... To bad Steve Meade stopped doing amp test Tuesday. Oh well no more views for him or his channel.
Thank you!
is it possible for u to get any soundqubed amp to test
I have. Check my videos
good test thanks man
Bro -the top spare fuse holder is clearly for #TEAMNOFUSE BRUHHH! C'MON NEWB! JEESH!
I would like to an amp test on a boss audio r1100 because I highly doubt their amp push as much as it said it could.
here is one review from sonicelectronix lmfao
"I just bought this amp and I really didn't know what I was getting cause its a little small for 5000 watts but the fuses in the amp sold it for me 2 70 amp fuses wow!!!! I'm powering two 12 inch lanzar max pros and my blazer pounds so if you have a sub that can handle a lot of power this amp is great for the price. I think I'm going to by another one just for fun. Can't beat it I love it!!!!"
Hahaha. So the fake fuse did exactly what they wanted it to. Exactly what I'm talking about. Totally unethical of them.
The Amp Lab sonicelectronics is so full of shit with there reviews youtube the products dont trust them reviews lol
That is so deceitful doing that to consumers, it also adds to bad reviews on a brand that ruled the car audio scene back in the 90's shame on you lanzar suckie indeed
85ssontharocz1 track this man down its 2018 i have questions
Man, you gotta use a setup that's putting out 14.40v or close to it. All of these amps rated at that power level are pretty pointless to be tested in the 12 volt range. It's really misleading.
If they aren't even close its not going to make that much difference. I do now have a setup capable of that and have retested some of these.
+The Amp Lab True, true.... Man, how the mighty have fallen. IIRC, some of those Lanzar old school amps were great.
very nice test....
i have 2 friends have the same amp. and then belive this amp do more than 1,000rms hahaha
can you do a test at lanzar vector 5000?? is a bit differente board!! i think do lika 900rms.... if is possible! thanks!
U shoud try runni it @ 2 ohm bridge. It mite b 1 ohm stable stereo
I recently bought four of these subwoofers but now I need a good Amp to push them.What would you recommend for them?I've searched every where and asked everybody and can't nobody seem to help me.You are my last hope.Help me please!!!!!(Pioneer Champion Series PRO TS-W3003D4
2000 Watts Peak Power, 12" Dual 4 Ohm).
Lanzar Max MXA284?
Bro that you have 1 tsw3003d4 this amplifier work 70% or 80% to your pioneer
No,I have Four of them.
buy a 2 audiopipe apcl-1500d for 2 pioneer
Wonder if Lanzar lost there CEA partnership due to all the POC stuff like this one... I had a look on their website, and I don't see any CES compliant equipment (at least not int he amplifers)... The CES webpage lists them as a partner too... ROFL
test a 6k power acoustiks amp
It's sad to think, this is the same company that bought Orion. :-(
sad to see the Lanzar name come to this.
Yes
hey man, have you ever tested Rockville amps? They have some good prices, but i'd like to see the guts to see what its really made of. lol
+Matthew Emillio Check out Dereck BigDWiz he tested those amps on his channel. They do rated and arent bad amps for nice price.
Will do man.. thanks
That sucks. Lanzar use to be the shit back in the day. I wish someone could buy the company and make them good again.
Hi. May be the second fuse part is suppose to be to store a spare fuse. May be the amp is suppose to run with just the one fuse! MMMMMMM! Just a thought.
opti series is the only way to go with lanzar
i think THD stands for Total Harmonic Distortion
You also got the cheapest one, get a opti drive
Old Lanzars are real, like the opti line, my 500x2 weighs 12kg, 4x40A fuses, neither fake...
:O
My old school 2500s kick ass
It’s never going to blow that fuse
Omg... This is the most ridiculous amp I have ever seen... The old lanzar amps wasn't like this
Hey, it comes with a spare fuse holder. lol
Should solder in thee other fuse for extra protection and maybe then it wouldn't be melting fuses lol
One thing to point out! Always only buy CE, CES or CEA compliant car audio! This means you will get everything stated! Stop helping the Black Market car audio manufacturers! Selling Knock-offs with Quality names tied to them! This is White Van car audio! Designed to get big sales and not gain any Competition status or wins for their records! Lanzar used to design their amplifier boards in-house especially with the 50c and back then a name was a promise for quality!
There's actually the many amplifier companies doing well over rated specs that are not CEA rated. I see CEA ratings as more of a marketing ploy than actual results. The tests are pretty vague. (Ie all tests are at 4-ohm) and the manufacturer gets to pick the sample to be tested.
I just ignore it for the most part myself.
Wow crazy shit
three lanzar amps they all sucked one 3500 watt nd two 5000 watt amps blew out in one day
Remove all heatsink clamps solder in two jumper wires apparently they forgot the wires fuse shouldn't ever be pulling over 80 amps to bubble that fuse
More working fuses mean more current gets to the billion FETs which in turn will stop the single fuse from melting and bubbling there's way too much current draw form all those parts on a 80amp maxi apparently they forgot to add jumpers or wire
at least It will stay cool on a kicker comp haha
Lol
That's the spare fuse holder. hehe.
After watching this video for the second time, I have a theory about the "spare fuse holder".
I'm thinking you got a bum amp that should have been labeled as B-stock. I see four wires coming off of the one fuse terminal. I'm going to guess someone in production didn't do their job properly, got lazy and either soldered one fuse holder to all four wires instead of 2 wires to each fuse holder, or there was a malfunction with something on the assembly line and this amp (along with others) was set aside to be "corrected" and was just made to work to get it out of the factory.
I only suspect this because I've worked in manufacturing and stuff like that happens a lot more than I care to admit. I'll just say this . . . if you buy a box of 6 donuts and the total package size of the entire box says "12 oz", that would lead you to believe there are 6 donuts that weigh 2 oz each right? Well, not always. As long as they all, together, weigh 12 oz, that's all that matters.
Has anyone ever opened up another one of these amplifiers to confirm this is normally done?
The only problem with that theory is that if both fuse holders and both fuses were meant to be used, then under the heavy load I put the amp through the single fuse should have blown (Because it would only be half of what the final fuse rating would be). It would have been too much for the single fuse to handle. Some amps I test even blow there fuses under a very heavy resistive load with the correct fusing in them. So only having half certainly would have.
I really think this is how it was meant to be.
The Amp Lab I never said having both fuses working would increase the output of the amplifier. LOL
The amplifier still does nowhere near rated. I'm not denying that at all. I just don't agree with the assumption that the intention was deception by using a dummy fuse. I'd be willing to bet a 6 pak that if someone were to open up the identical amplifier the guts would look different.
I never mentioned it putting out more power. I think you misunderstood what I was getting at.
In either case, I am betting 2 12 packs that every amp of this model would look exactly like this. They did not screw up this one amp I would bet money on it.
I'de like to see how the Kenwood KAC-9106D 2000 Watt amp performs. Its pretty close in price to these complete BS amps. also any power acoustik amps as well just to see how overrated they are.
This should be illegal
They added a extra 0 on accident 🤷♂️😂🤣😂🤣
Opti drives and vibe line are korean made.
Wow
that shit should be illegal
I agree
It is illegal , just no one has sued them yet .. But your right it is illegal to lie to consumers.
150 dollars for 600 watts... people getting ripped off without even knowing it.
lmao awesome vid when you said it weighs 7 pounds when you were flipping it over i said thats why when you did when seeing the guts lol the basterds
what a rip-off I'm glad I just got me a Hifonics Brutus amp
good choice, how is it today?
Eselente
There must be an engineering's perspective of the fuse issue. If NOT, shame on you Lanzar. Your design engineers have let you down.
do yall remember the old isis amps??
600 rms each subwoofers
Amp consumer?
Why do you test people products when you can't supply the proper voltages
Someone accidentally added a extra 0
Better still it would not be the engineers fault, it would be the company's fault.
pathetic really, these are the types of amps i hear about all day and bite my tongue to stop from telling them what useless paper weights they are. lol
this is a fake Lanzar Max MXA284
SMH, No its not fake
silversnow1313 there has been some ive seen that does have the MXA284 the A is missing in this case. but idk
+The Amp Lab Though I do believe this amp to be severely overrated .... I believe this test isn't accurate .....The fact the fuse was getting so hot showed there is a severe restriction on power to the amp.... Obviously if the power was being restricted, this would hinder the power performance of the amp... Were there two maxi's in there from the factory or did it come with 1
this amp not so bad...pushes my single Funky Pup 12 to 149db on the dash ;)
+MrShiffles If making noise is all your interested in then your right, not bad!
hey whats up man. i just purchased a lanzar mini max MNX 5000D just wondering if u can do a amp test on it I'd like to know what kinda paaa Waaaa it pushes . you can email my user name at gmail . com and we can set up the shipping..
mastertechrepair at gmail(.)com
Lanzar was purchased back in the 90' by sound around ie pyramid the shit is trash.
do your homework lanzar opti is still the Shit I wouldn't fuck with this Shit on this video
you got to love CHINA!!!!
power pmpo 5000 w ¡¡