I would be curios to see another video with real world use of it. free style, ramp, street. and get a prespective on how it feels compared to a regular wood board.
@@litheskateboards if it skates comprable and has this durability isent it like an incredible upgrade? doesnt even have to skate better persay. although that squeak would take me off of it real quick.
@@dillonoickle5841 I could be wrong, but it looked like it only started squeaking after getting hit so hard that at the point the normal one would've already been broken.
Ya!! I would love to see this actually skated. I really like the shape and concave from what I could tell from the video. I bet it nose-slides amazing.
Wow that was way more durable than expected. The way it held the car up was impressive. The flight deck just bent straight to the ground in the other video.
@@iSchwiifty sometimes that's how it be ngl it's too easy to just forget tricks if you don't skate for a while had to re learn pop shuvs from the start after winter ended
The loss of pop comes from the board aging and attaining moisture etc. But I do also think its affected by the tail since the thickness has been reduced on the point of contact means there is less force pushing the board up that moment you pop.
The flexibility of the thinner edge of a razor-tail board absolutely results in less pop. At the moment of contact, the thin edge hits the ground and inelastically deforms. This transfers most of the energy to bending the thin edge instead of moving it up.
Uhm, wrong. The pop of a skateboard doesn't come from whatever the edge of a tail or nose is like in terms of thickness. The pop comes from the overall stiffness of the board and the way the board is able to flex and rebound. The board being a few mm shorter has pretty much no impact on pop when a deck is still fresh / new. Ironically, boards like the Powell Flight decks pretty much never lose their pop, which is due to the material of the board, not something related to razor tails. In fact, one of my Flight decks had insane razor tail and _still_ had a crazy pop. Still extremely skateable. With the way physics work, you can't 'bend' the outer edge of a tail or nose. The physics stay the same.
Using only two bolts certainly puts more stress on them making them more likely to snap if over-stressed. It doesn't happen often, but personally have had a truck bolt or two break while skating. Four bolts distributes the stress more.
I'm guessing that the green stuff is similar to the stuff inside hockey sticks. It's basically a material that fills micro-fractures in the stick (in this case, board). Just a guess.
I thought it would be polyurethane like a skateboard wheel, people have been using it for snowboard sidewalls for ages. Cool deck for sure but carbon fiber is awful for friction resistance so it might only last 200-300 times as long as a regular wooden skateboard.
@@cwj138 If it was just polyurethane, they wouldn't need to be all hush, hush about it. They wouldn't be able to patent it so why keep it a secret? Using a material in a new way could be. But, who knows. You could be right. Maybe because it's a skateboard, they can patent it. But I doubt it. Soon, you'll see all the big name pros using carbon fiber boards. It will start slow but eventually, everyone will be using them. That's how it happened with hockey sticks.
Reminds me of the "bulletproof" boards from about 22 years ago. They were made of fiberglass or something and claimed to be unbreakable, but they broke just the same.
@@ebybbob A few of my friends ordered some bulletproof decks around 2000/01. They had a lifetime guarantee and they would send you a new board if yours broke. Well they all got about 3 new boards untill the company gave up lol. They went out of business, and apparently the owner (paul hallet) made another company called "immortal skateboards" around 2014.
@@Schwabguitar lol wow didn't know what happened to them thx! I figure if your biz model revolves around unbreakable boards that you'll replace for free then they better be a lot closer to the board in this vid!
Actually, that's the problem with boards like this though. The less they are capable of breaking and the more of a 100% rebound you get on impact, the higher the chance _your_ bones will break, instead of the skateboard. A hybrid skateboard makes _some_ sense in context of durability, but a 100% carbon one really does not make sense at all. It changes the physics involved and can actually be very dangerous. Not to mention how these boards are insanely overpriced. I'm not trying to hate on their efforts, but Lithe skateboards aren't it.
@@PHeMoX that's a strange way of thinking dudes, I don't think it works that way, using the same argument let's say there's 7 layered MDF board-shaped deck, it breaks easier than you skate on it and drop down 10 floors like jaws usually do, it will breaks absorbing some the impact and release another into your body, I bet you will break your bones. The less they are capable of breaking doesn't translate into the higher chance of our bones breaking. flexibility, damping factors, and lots of variables should be put into account.
Wow that's a tuff board. Under normal use and care it would last a long time. The tails could use replaceable skid plates to help prevent razoring as far as everything else it's great. If you can make this thing any stronger in the middle. It will be the ultimate board. That green stuff is just wow.
Was the first one Aluminum? There was a company making aluminum boards in the early 2000s ... They didn't fair as well as one would expect... they would develop a WICKED case of (quite literal) razor tail. Lol
I figured it out. The secret is shock absorption. If you wanna make a PERFECT unbreakable board it needs to not only survive slams, razor and chip, it needs to not snap your ankles off big drops. If someone could create a board that can safely absorb big drops without any damage it'd revolutionise skating forever
If they make a skateboard that doesn’t brake the creator will only sell skateboards once. The point in a business is for them to break if not they won’t sell.
Yeah and I figured out the secret to living forever. If someone could just create a jab which would reverse our ageing it'd revolutionise our lives forever! You see how making a blanketed statement doesn't mean you have 'figured it out,' but just mentioned what everyone already knew.
Outside green stuff is probably some variation Delrin -- likely Delrin with PTFE. It's lustre is too shiny to be a glass-reinfornced nylon, and Delrin would be the only polymer that would have the wear and abbrassion resistence needed for this application. :)
My guess is the green outer layer is like a poly urethane. Maybe recycled skateboard wheels? A similar process with how they make tar from tires for roads.
I was thinking some non-Newtonian material, like in the edges of some phone cases. It hardens on impact and redirects force around the board, rather than through it.
I ordered when this video was made and haven't received anything or heard from them yet. Hope they come thru on on their part someday, they haven't sent any updates yet
Loots of people are claiming its a scam. Their face book page hasn't been updated in almost a year and alot of people aren't receiving their board or an email atall
I've absolutely broken boards in the past because it got ran over whilst skating a car park. The guy stopped and the board stopped under his front tyre, he started thinking it had gone all the way under and broke the nose clean off at the bend. The engineering that goes into boards like this is impressive but they never end up lasting long enough to be worth the extra price, if they can mass produce them for cheap enough though that would be awesome. The green edge is sick too if it's really that durable.
I’m a bit late to comment on this, but I’m stuck for choice, would you guys prefer this, or the Capsule Flight Path deck that you tried since then? From what I can see they’re both solid choices, but you guys are the only ones I know that have had hands on experience with both.
a lot of freestyle tricks and stuff like caspers and darkslides destroy a regular board fast so it would be interesting to see how this deck holds up to that type of skating
@@vivelachocha7440 id give darkslides a go the only thing stopping me is how it instantly destroys the top of your board after only a few attempts and decks are expensive ;)
Is it possible that the heat from the fire melted whatever resin keeps carbon fiber together? If that were the case, the board was relying only on the flubber and the wood for structural integrity when it snapped.
That's genuinely a cool board. What is the weight difference between traditional boards and this one? What is the expected cost? If the answer to these two questions is nominal with a traditional board this is a game changer and a huge disrupter to the industry. Where do I invest?
@@brailleskateboarding if my other comment happens to infringe on anything wanna delete that for me... not sure how that legal stuff works just my little bit of engineering knowledge base guess
I think it would be really interesting to see some real world long time feedback from a pro, especially someone that goes big, often and skates a ton. Like give this board to Nyjah, or Jaws, and if it lives past a month, you win. Clearly, this board is strong, but how does it handle long time, real world use? Very neat product.
I looked them up a little while ago and were only like 400$ ish I thought to myself that's roughly the average Price for a decent surfboard. Considering the amount of stress a skateboard undergoes I feel like this would be a great investment for any skater because it ain't gonna ever break on you so it's not like you going to have to buy another deck probably ever lol
15:29 Noooooooo! the only reason why it broke is because a car was parked on it right in the middle. Nobody is going to do that unless they were trying to break the board like you guys were so there is no reason to add more weight to strengthen something that doesn't need to be strengthened any more than it already is. The board is already slightly heavier than a normal board.
Heck yeah love this channel and the skater community on TH-cam I have just started live in Australia Townsville solo skating atm also just going to empty skateparks, Just having alot of fun
Where can I get one? Id really like to ride one for a few weeks and see how consistent it is with a normal maple deck. If it feels the same I will 100% start using these.
Ricky would be proud hahah but jokes aside, i would buy this board, also would be awesome to be able to make ur own graphics on it with the order, cuz without throwing it to fire and under cars - it would last for a VERY long time. at least for me personally
@@brailleskateboarding i will! The last five days alone i spent 30+ hours learning how to use a bowl, how to ollie + pop shove it (landed it quite a few times but i got too cocky so i fell and bruised my knee real bad. Might be cause i am broke like a true skater and cant afford new wheels so i use/used my old longboard slicks which actually is harder but made me 10x better with slims. What makes me happy for eternity is that a older quite professional skateboarder saw me struggling with my wheels and was more than happy to sell my one of his used boards that he didnt really use for 10$ so i'll turn my life over and start working to never be too broke for being safe). i watched alot of your guys content on the S.K.A.T.E.-series to get inspiration and to remind myself that if i fall it wont hurt too bad...i hope. The next thing on the list is the feeble 270 drop in that Nigel did in the drop in only challenge. Keep doing what you are and keep inspiring new skaters (or revive the old-school skate style with the Braille Skateboarding twist to make it interesting again). I'll keep y'all posted when i get the feeble right :D
Ordered mine on May 4th 2021, a standard 8.25”. Still haven’t been delivered. Those guys are having “enormous” delay and backlog issues. And to this day, I am not sure if I am ever gonna see that deck delivered ever (meanwhile, I am not even skating 8.25 anymore, moved up a quarter). $240 (shipping cost to Europe included) “immobilized” for over a year… This maybe is the real deal, definitely looks like the strongest thing out there. BUT please, at least, inform your viewers what a horrible customer experience it is to order one of these decks and the delay they are about to face if they do order. Cheers.
Oh no! Yes I had no idea they should not be selling at all in that case. I know they are making the boards themselves now so maybe they get yours out but that totally sucks Im sorry
All of the Slate 3 on our website have been listed a pre-order, we never had them in stock. The delays are coming to an end. The decks were originally going to produced in China. After COVID hit we faced nonstop delays from the manufacturer. At the beginning of the year we began making our own small factory in LA to transition back to USA. Our Los Angeles factory just got completed. The decks we took to Braille are the first USA made Slate 3's. We estimate all pre-orders should be delivered within 2 months.
@@litheskateboards Then send out doubles to anyone who pre-ordered. Since you didn't offer refunds or notice of delay when the mfg fell through. People shouldn't wait over a year for a product. Pre-order or not.
If you want a durable, waterproof, composite board, look into Capsule Skateboards. They are produced in Cyprus and definitely ship sooner. I got mine about one month after ordering earlier this year. And they were also tested by Braille and they could not break it. Also, they are a bit cheaper than 240 bucks, with currently free shipping to Europe and the US in orders over 150 bucks.
I think the outer edge has some version of D30. We use D30 in our gear for motorcycle riding/racing. The harder the impact the more it distrubutes the energy.
You should find a way to get in contact with lithe and get some info on whats going on for all of the people that are still waiting on this board years after ordering or delete this video from your channel to prevent anymore people from getting ripped off. They don't even respond or anything to people that ordered a board from them, they haven't updated the production status on the website in almost 2 years
Pretty cool, I like that innovations are still being chased. I remember a company called Aircraft that made aluminum decks in the late 90s....they weren't great. This actually looks like it's usable
That looks similar to a P-tex material used for bases of skis/snowboards. We also use a hard plastic material at my work that is very durable and lasts.
Under normal skating though this would last forever, I love it. I love the engineering behind it the enthusiasm and belief in their product. Yeah I would buy one for sure !
awsome, except iv been trying to get one for years haha wish they made more at mass (edit) i get my decks made from a guy i saw online, my new one is carbon fibre and kevlar weaved, super strong and snappy! because i got bored snapping boards every 3 weeks (im a heavy footed skater)
@@davidwhite5386 i feel you on that one man, as soon as they are actually available i will buy one instantly but for the past few years ive been checking... its always pre order. which is fine id rather them have the time to innovate it more!
@@DB19899 yea I feel you man I hope you get yours soon, they look so dope! But even with covid 2 years is way too long... I'm not hating the just waiting until they have stock, until then my guy does an amazing job so I'll shred his until then
I’m assuming that the green binder around the rim of the skateboard would be a high-performance industrial rubber. I’ve seen some speculation that it would be a high end plastic, but anything that’s plastic with the ability to bend as seen in the video would be too expensive to have on a skateboard. Although, the “unbreakable” part of the name makes me doubt that they would care about price, and for now just focus on making it truly unbreakable. There are some rubbers that are commonly used for cleaning, that could be a better candidate for the rim of the board. Although the rubbers that I am referring usually excrete a highly sticky residue; so they could coat the rubbers I’ve recommended with the mystery substance that they originally used. This would also solve an aesthetic issue, because the materials I have recommended are blue, instead of green. But I personally prefer blue over green, because it usually is more vibrant when watching from a screened device. I do not doubt that green looks amazing on this board, I’m just saying that if they had more colors and designs for the board, it would draw in more buyers. Some tungsten carbide rods along the inside center could make it more durable. And maybe consider coating it in a weatherproof material or spray. If you read through this entire comment and followed along with my reasoning, I salute you. You are now my brother though machining.
use it as your normal skateboard for several months to get some real data on it. insane concentrated damaged is cool, but standard wear and tear is better
Ive had 3 lithe boards. They never lose their pop and they dont really snap. But after a while, they start to become bendy and soft. That being said, my last lithe board lasted me a year. It never razor tailed, and it also was impossible to chip.
So how much is that skateboard? I've been thinking about buying one, to start learning, I think this one would be the best investment and last me forever.
The issue was definitely the car. Even though it broke, even my most destructive friends could hold onto this for YEARS. Great product, I don’t think any changes to be made unless there’s a full replacement/ refund guarantee. Maybe offer a replacement, for a discount if the return the broken board
That's insane 🤯😱. I doubt that the green rim could be made out of strong acrylic or fiber glass like they use for ice hockey boards on the outside of the rink. Reason why I say ice hockey rink barrier boards because that has a strong & stable bounce whenever a player is knocked into the boards
Could be a non-neutonian material, which on impact is hard as a rock and under no pressure is soft, then compressed into something to keep it under that pressure, you can probably say this non-neutonian material densifies and is super resistant. I might be wrong, but that orange stuff they are using on ballistic vests with non-neutonian material are crazy resistant.
Just so you guys now... The SYS griptape is very very easy on the shoe. It works remarkable BUT only if you are into not grippy griptape. If you want a super sticky Grip like MOB you will not be satisfied with it because its just not enough friction. Plus if its a little humid outside or rainy it will be super slippy almost to the point of being unusable. I however like non sticky grip and dont skate in rainy/ humid eviroments so its perfect for me. Definitly worth giving it a shot. It can happen to save you alot of money..
I would be curios to see another video with real world use of it. free style, ramp, street. and get a prespective on how it feels compared to a regular wood board.
I like that idea. Half the work was making it tougher than maple. The other half the work designing it was to make it skate better (pop, slide, etc.)
@@litheskateboards if it skates comprable and has this durability isent it like an incredible upgrade? doesnt even have to skate better persay. although that squeak would take me off of it real quick.
YES PLEASE! Have the guys do some tricks on it
@@dillonoickle5841 I could be wrong, but it looked like it only started squeaking after getting hit so hard that at the point the normal one would've already been broken.
Ya!! I would love to see this actually skated. I really like the shape and concave from what I could tell from the video. I bet it nose-slides amazing.
Wow that was way more durable than expected. The way it held the car up was impressive. The flight deck just bent straight to the ground in the other video.
Thanks a lot! Fun to make
Flubber man wow, one of my first favorites
Sobe kind of ruber
You guys inspired me to buy a skateboard and start skateboarding I started two days ago I can ride around and I can almost do an Ollie
LeBron
Nice dude
Keep it up
So cool. Keep going.
Let's go
That was awesome. I know the guy was bummed they got to break. But come on, that board would have lasted me multiple lifetimes.
Straight up, for some reason I felt bad for the Creator guys lol
The last few days have been the best of my life, I've finally got kickflips consistent and everything else just in general has come together for me
its been super hot where im at but i live across the street from the skate park so i literally go and land 3 kickflips a day to make sure i got it😂😂
@@iSchwiifty sometimes that's how it be ngl it's too easy to just forget tricks if you don't skate for a while had to re learn pop shuvs from the start after winter ended
👍🏻
The loss of pop comes from the board aging and attaining moisture etc. But I do also think its affected by the tail since the thickness has been reduced on the point of contact means there is less force pushing the board up that moment you pop.
The flexibility of the thinner edge of a razor-tail board absolutely results in less pop. At the moment of contact, the thin edge hits the ground and inelastically deforms. This transfers most of the energy to bending the thin edge instead of moving it up.
Big words = factual statements
100%
Uhm, wrong. The pop of a skateboard doesn't come from whatever the edge of a tail or nose is like in terms of thickness. The pop comes from the overall stiffness of the board and the way the board is able to flex and rebound. The board being a few mm shorter has pretty much no impact on pop when a deck is still fresh / new. Ironically, boards like the Powell Flight decks pretty much never lose their pop, which is due to the material of the board, not something related to razor tails. In fact, one of my Flight decks had insane razor tail and _still_ had a crazy pop. Still extremely skateable. With the way physics work, you can't 'bend' the outer edge of a tail or nose. The physics stay the same.
@@PHeMoX if the rail is thinner it's less stiff so less pop
@@PHeMoX You are right but that thin part of the razor tail flexing is a loss of energy and therefore a loss of pop.
Using only two bolts certainly puts more stress on them making them more likely to snap if over-stressed. It doesn't happen often, but personally have had a truck bolt or two break while skating. Four bolts distributes the stress more.
I never broke one, but I had one back out and fall out, so I was riding around on 3 screws and didn't notice for awhile
I'm guessing that the green stuff is similar to the stuff inside hockey sticks. It's basically a material that fills micro-fractures in the stick (in this case, board). Just a guess.
@Foxx1 Thanks. It seems like that would make sense. At least to me. I could be WAY off. Who knows?
I thought it would be polyurethane like a skateboard wheel, people have been using it for snowboard sidewalls for ages. Cool deck for sure but carbon fiber is awful for friction resistance so it might only last 200-300 times as long as a regular wooden skateboard.
@@cwj138 If it was just polyurethane, they wouldn't need to be all hush, hush about it. They wouldn't be able to patent it so why keep it a secret? Using a material in a new way could be. But, who knows. You could be right. Maybe because it's a skateboard, they can patent it. But I doubt it. Soon, you'll see all the big name pros using carbon fiber boards. It will start slow but eventually, everyone will be using them. That's how it happened with hockey sticks.
It's literally just a soft plastic
@@TourGuide223 You bought one?
Reminds me of the "bulletproof" boards from about 22 years ago. They were made of fiberglass or something and claimed to be unbreakable, but they broke just the same.
Interesting
I remember those from the 90s! They were wood-core with like a fiberglass shell. They looked sketchy af
@@ebybbob A few of my friends ordered some bulletproof decks around 2000/01. They had a lifetime guarantee and they would send you a new board if yours broke. Well they all got about 3 new boards untill the company gave up lol. They went out of business, and apparently the owner (paul hallet) made another company called "immortal skateboards" around 2014.
@@Schwabguitar lol wow didn't know what happened to them thx! I figure if your biz model revolves around unbreakable boards that you'll replace for free then they better be a lot closer to the board in this vid!
I remember the Krypto Foam boards. Major Failure.
This is just what skateboards should be made out of. I’m excited to see how this design evolves.
The fact they didn’t want to reveal the secret of the skateboard is literally just Mr. Krabs and the secret formula of the krabby patties
This is what I need while trying to get back into Skating. I also need my bones to be as robust 😂
i mean.. flight deck.
Actually, that's the problem with boards like this though. The less they are capable of breaking and the more of a 100% rebound you get on impact, the higher the chance _your_ bones will break, instead of the skateboard. A hybrid skateboard makes _some_ sense in context of durability, but a 100% carbon one really does not make sense at all. It changes the physics involved and can actually be very dangerous. Not to mention how these boards are insanely overpriced. I'm not trying to hate on their efforts, but Lithe skateboards aren't it.
get your bones infused with that green stuff like wolverine
💚👊
@@PHeMoX that's a strange way of thinking dudes, I don't think it works that way, using the same argument let's say there's 7 layered MDF board-shaped deck, it breaks easier than you skate on it and drop down 10 floors like jaws usually do, it will breaks absorbing some the impact and release another into your body, I bet you will break your bones.
The less they are capable of breaking doesn't translate into the higher chance of our bones breaking. flexibility, damping factors, and lots of variables should be put into account.
Looks like UHMW to me. A super slick low friction material. very strong, used for skidplates on rock crawlers and jet boats.
UHMW is brittle AF....
@@PokeSkaterDan at like temperatures below -200°….it’s known to have high Tensile strength and it’s very durable
Oh it has amazing tensile strength even at +140°F... but under tension with an abrupt point load, toast, like a grenade...🤷♂️
@@PokeSkaterDan 😂😂😂
@@gradystanley5812 lol you know your stuff sir🤣🤣
Really cool how they use different types of wood at different areas of the skateboard. If they start selling in Europe I won't hesitate to order one.
They sell world wide
@@DB19899 excuse me, I meant shipping from within Europe.
@@thijs199 what are the boards called?
I found them. They are "lithe slate 3" I think
I order one in july 2020 and got nothing same as so many people who ordered one💀
We need Andy Anderson for testing. He has a very detailed and unique way of explaining skateboards.
Yes
An Andy Anderson deck made out of this and you'd never need another skateboard in your life!
Wow that's a tuff board. Under normal use and care it would last a long time. The tails could use replaceable skid plates to help prevent razoring as far as everything else it's great. If you can make this thing any stronger in the middle. It will be the ultimate board. That green stuff is just wow.
they've used the green stuff in phone cases for years now, very shock resistant, its like oobleck rubber
@@Chefffff that's what I thought too. It was the closest thing I could think of. I seen a video on that stuff.
Doing additional testing now to get the center more tough without changing the flex. We will start pressing them this week 🙂
@@litheskateboards I would put some type of rods going through the board. Some type of reinforcement like concrete rebar.
@@litheskateboards there's no need dudes. It broke but there's no way someone is breaking that under practical use.
I remember the first one soooo long ago! Amazing what it has come to grow to and you got the guys who made it on with you this time! THAT'S SO SICK!
Thanks
Was the first one Aluminum? There was a company making aluminum boards in the early 2000s ...
They didn't fair as well as one would expect... they would develop a WICKED case of (quite literal) razor tail. Lol
I figured it out. The secret is shock absorption. If you wanna make a PERFECT unbreakable board it needs to not only survive slams, razor and chip, it needs to not snap your ankles off big drops. If someone could create a board that can safely absorb big drops without any damage it'd revolutionise skating forever
I always thought this type of shock absorbing should be done with shoes instead.
If they make a skateboard that doesn’t brake the creator will only sell skateboards once. The point in a business is for them to break if not they won’t sell.
Yeah and I figured out the secret to living forever. If someone could just create a jab which would reverse our ageing it'd revolutionise our lives forever! You see how making a blanketed statement doesn't mean you have 'figured it out,' but just mentioned what everyone already knew.
@@JackSturmanFilms why are you hating on a comment on a braille video bro it’s prolly a kid
@@TheAnimeist that is why i ride footprint skateshoes. They have a special sole with 91% impact absorption. It is a non newtonian rubber in it.
Outside green stuff is probably some variation Delrin -- likely Delrin with PTFE. It's lustre is too shiny to be a glass-reinfornced nylon, and Delrin would be the only polymer that would have the wear and abbrassion resistence needed for this application. :)
This dude from Germany is so nice addition to the channel! 🖤
He skates for lithe skateboards
8:05 well, it increases the height it takes before your tail hits the ground, a razor tail. So I'd say that's the big factor in the less pop feeling
My guess is the green outer layer is like a poly urethane. Maybe recycled skateboard wheels? A similar process with how they make tar from tires for roads.
I was thinking delrin, but definitely some sort of plastic!
almost definitely. A lot of longboards use the exact same thing. Moonshine MFG uses it in most their decks.
I was thinking some non-Newtonian material, like in the edges of some phone cases. It hardens on impact and redirects force around the board, rather than through it.
I ordered when this video was made and haven't received anything or heard from them yet. Hope they come thru on on their part someday, they haven't sent any updates yet
Loots of people are claiming its a scam. Their face book page hasn't been updated in almost a year and alot of people aren't receiving their board or an email atall
I can appreciate innovation. Growing up I saw the transition in hockey from wooden sticks to composite material and maybe that’ll be seen here too
Been waiting on my slate 3 for a little over a year! stoked to get Mine!
Much love ❤️
I've absolutely broken boards in the past because it got ran over whilst skating a car park. The guy stopped and the board stopped under his front tyre, he started thinking it had gone all the way under and broke the nose clean off at the bend.
The engineering that goes into boards like this is impressive but they never end up lasting long enough to be worth the extra price, if they can mass produce them for cheap enough though that would be awesome. The green edge is sick too if it's really that durable.
I’m a bit late to comment on this, but I’m stuck for choice, would you guys prefer this, or the Capsule Flight Path deck that you tried since then? From what I can see they’re both solid choices, but you guys are the only ones I know that have had hands on experience with both.
a lot of freestyle tricks and stuff like caspers and darkslides destroy a regular board fast so it would be interesting to see how this deck holds up to that type of skating
who's dark sliding??
@@vivelachocha7440 id give darkslides a go the only thing stopping me is how it instantly destroys the top of your board after only a few attempts and decks are expensive ;)
This is really awesome and honestly I feel like tons of skaters have wanted stronger boards since the beginning.
i like how he said DROP test then immediantly throws it at the ground
Wish we could see this thing in action on the 3-block!!! Mogley vs Chris McNug game of s.k.a.t.e.
Best ad for these guys! Very impressive work!
Thanks. Not a paid video at all really its just a test video
@@brailleskateboarding I know :) Nevertheless, the board delivered
Is it possible that the heat from the fire melted whatever resin keeps carbon fiber together? If that were the case, the board was relying only on the flubber and the wood for structural integrity when it snapped.
Definitely possible! We're gonna make it a tad stronger anyways though 💚
I was thinking the same thing. The kerosene may also have acted as a solvent, breaking down the resin, depending on the type of resin used.
That's genuinely a cool board. What is the weight difference between traditional boards and this one? What is the expected cost? If the answer to these two questions is nominal with a traditional board this is a game changer and a huge disrupter to the industry. Where do I invest?
I myself would love to see another video make a part two once it gets reinforced
When do they start production? I preordered one 3 years ago :/
I’ve been eyeing these and wondered how strong they were. Definitely gonna try one!
💚👊
u guys are one the first skate channel ive seen and inspired me so much
Much love
I mean i can see future skateboarders saying who rides this wood nowdays? That skateboard is a game changer for everybody, last longer then ever
Poly res of some sort probably with added carbon 2:31
Now I, too, have the confidence that I can break anything if I put my mind to it! :D
I have faith in you
😂
@@brailleskateboarding if my other comment happens to infringe on anything wanna delete that for me... not sure how that legal stuff works just my little bit of engineering knowledge base guess
Skateboarding was my life in the 80’s and I think that deck is absolutely beautiful!
I think it would be really interesting to see some real world long time feedback from a pro, especially someone that goes big, often and skates a ton. Like give this board to Nyjah, or Jaws, and if it lives past a month, you win. Clearly, this board is strong, but how does it handle long time, real world use? Very neat product.
I'm guessing it's maybe a hard skate wheel material used around the edge?
I looked them up a little while ago and were only like 400$ ish I thought to myself that's roughly the average Price for a decent surfboard. Considering the amount of stress a skateboard undergoes I feel like this would be a great investment for any skater because it ain't gonna ever break on you so it's not like you going to have to buy another deck probably ever lol
15:29 Noooooooo! the only reason why it broke is because a car was parked on it right in the middle. Nobody is going to do that unless they were trying to break the board like you guys were so there is no reason to add more weight to strengthen something that doesn't need to be strengthened any more than it already is. The board is already slightly heavier than a normal board.
Where do you get a board like this?
Its a lithe s3 they are 209 usd
@@randyestremera2418 That seems like a reasonable price. Do they make longboards?
I fr pre-ordered this skateboard 2years ago and it never arrived, now that you guys have it I’ve found a glimpse of hope again
Yes they started manufacturing themselves. I hope you get your board soon Im sorry I didnt know they had backlog orders like that
You should record a skate video with this but the board is on fire the whole time
Heck yeah love this channel and the skater community on TH-cam I have just started live in Australia Townsville solo skating atm also just going to empty skateparks, Just having alot of fun
It’s solidified HULK NUT
Where can I get one? Id really like to ride one for a few weeks and see how consistent it is with a normal maple deck. If it feels the same I will 100% start using these.
Ricky would be proud hahah
but jokes aside, i would buy this board, also would be awesome to be able to make ur own graphics on it with the order, cuz without throwing it to fire and under cars - it would last for a VERY long time. at least for me personally
Visited channel after long time, everything is still there, vibe, mood, fun!!!
Thanks so much
I can't imagine a world without skateboards
imagine scootering was the more superior sport
A world without skateboards is like a skateboard without a world. Both CAN be imagined. BUT that imagination is terrifying!
Running is more fun when you're fit and fast I skated 14 years and I've run 10 so far it's way more fun and natural sport
Sweet video. FYI you have winter tires on that prius which do terrible for treadwear and performance in the heat.
Really?
@@brailleskateboarding yeah you’ll go through winter tires 5x as fast in the heat and have terrible braking performance in an emergency.
started skating cause of your guys again and i got wayyy better then j used to be
So awesome! Keep it up
@@brailleskateboarding i will! The last five days alone i spent 30+ hours learning how to use a bowl, how to ollie + pop shove it (landed it quite a few times but i got too cocky so i fell and bruised my knee real bad. Might be cause i am broke like a true skater and cant afford new wheels so i use/used my old longboard slicks which actually is harder but made me 10x better with slims. What makes me happy for eternity is that a older quite professional skateboarder saw me struggling with my wheels and was more than happy to sell my one of his used boards that he didnt really use for 10$ so i'll turn my life over and start working to never be too broke for being safe). i watched alot of your guys content on the S.K.A.T.E.-series to get inspiration and to remind myself that if i fall it wont hurt too bad...i hope. The next thing on the list is the feeble 270 drop in that Nigel did in the drop in only challenge. Keep doing what you are and keep inspiring new skaters (or revive the old-school skate style with the Braille Skateboarding twist to make it interesting again). I'll keep y'all posted when i get the feeble right :D
The green on the outside is urethane.
Ordered mine on May 4th 2021, a standard 8.25”. Still haven’t been delivered. Those guys are having “enormous” delay and backlog issues. And to this day, I am not sure if I am ever gonna see that deck delivered ever (meanwhile, I am not even skating 8.25 anymore, moved up a quarter). $240 (shipping cost to Europe included) “immobilized” for over a year… This maybe is the real deal, definitely looks like the strongest thing out there. BUT please, at least, inform your viewers what a horrible customer experience it is to order one of these decks and the delay they are about to face if they do order. Cheers.
Oh no! Yes I had no idea they should not be selling at all in that case. I know they are making the boards themselves now so maybe they get yours out but that totally sucks Im sorry
All of the Slate 3 on our website have been listed a pre-order, we never had them in stock. The delays are coming to an end. The decks were originally going to produced in China. After COVID hit we faced nonstop delays from the manufacturer. At the beginning of the year we began making our own small factory in LA to transition back to USA. Our Los Angeles factory just got completed. The decks we took to Braille are the first USA made Slate 3's. We estimate all pre-orders should be delivered within 2 months.
@@litheskateboards Then send out doubles to anyone who pre-ordered. Since you didn't offer refunds or notice of delay when the mfg fell through. People shouldn't wait over a year for a product. Pre-order or not.
If you want a durable, waterproof, composite board, look into Capsule Skateboards. They are produced in Cyprus and definitely ship sooner. I got mine about one month after ordering earlier this year. And they were also tested by Braille and they could not break it.
Also, they are a bit cheaper than 240 bucks, with currently free shipping to Europe and the US in orders over 150 bucks.
@@brailleskateboarding should of done some homework on the company before advertising them on the channel
I think the outer edge has some version of D30. We use D30 in our gear for motorcycle riding/racing. The harder the impact the more it distrubutes the energy.
You should find a way to get in contact with lithe and get some info on whats going on for all of the people that are still waiting on this board years after ordering or delete this video from your channel to prevent anymore people from getting ripped off. They don't even respond or anything to people that ordered a board from them, they haven't updated the production status on the website in almost 2 years
Pretty cool, I like that innovations are still being chased. I remember a company called Aircraft that made aluminum decks in the late 90s....they weren't great. This actually looks like it's usable
That looks similar to a P-tex material used for bases of skis/snowboards. We also use a hard plastic material at my work that is very durable and lasts.
Interesting
Under normal skating though this would last forever, I love it. I love the engineering behind it the enthusiasm and belief in their product. Yeah I would buy one for sure !
wish you would make a clip about the rubber griptape. would like to know f it really works like they promise on their page.
We did videos with them already
the border is made from the same ruber as bouncyballs :)
11:53 bro that "first try" made laught so bad 🤣🤣🤣
awsome, except iv been trying to get one for years haha wish they made more at mass (edit) i get my decks made from a guy i saw online, my new one is carbon fibre and kevlar weaved, super strong and snappy! because i got bored snapping boards every 3 weeks (im a heavy footed skater)
Ive been waiting the whole time too. Crazy long time but im willing to wait to invest in the future of skating.
@@davidwhite5386 i feel you on that one man, as soon as they are actually available i will buy one instantly but for the past few years ive been checking... its always pre order. which is fine id rather them have the time to innovate it more!
@@Magic4d4m they are available I ordered mine in 2020 but covid messed their production up. Got the all black graphic will be shipped soon I hope 🙏
@@DB19899 yea I feel you man I hope you get yours soon, they look so dope! But even with covid 2 years is way too long... I'm not hating the just waiting until they have stock, until then my guy does an amazing job so I'll shred his until then
What is the name of that board brand to buy it
Lithe
I still Skate at 39 here in Vegas. But I’m also a fit 230lbs and i go through boards almost every skate session. This may be the answer :)
It could be!
Sebastian that was sick I had no idea he could smash boards that easily not to mention the kick flips too awesome man nice job
I was literally yelling FLUBBER at the screen and said "YESSS" when you finally mentioned it lololol
Start of the video: work of art beautiful. .
End of video: AK holds his own master piece
The future of skate ! 👏👏👏👏
They are hard to get a hold of. I definitely have tried to pick one up a few times.
I’m assuming that the green binder around the rim of the skateboard would be a high-performance industrial rubber. I’ve seen some speculation that it would be a high end plastic, but anything that’s plastic with the ability to bend as seen in the video would be too expensive to have on a skateboard. Although, the “unbreakable” part of the name makes me doubt that they would care about price, and for now just focus on making it truly unbreakable. There are some rubbers that are commonly used for cleaning, that could be a better candidate for the rim of the board. Although the rubbers that I am referring usually excrete a highly sticky residue; so they could coat the rubbers I’ve recommended with the mystery substance that they originally used. This would also solve an aesthetic issue, because the materials I have recommended are blue, instead of green. But I personally prefer blue over green, because it usually is more vibrant when watching from a screened device. I do not doubt that green looks amazing on this board, I’m just saying that if they had more colors and designs for the board, it would draw in more buyers. Some tungsten carbide rods along the inside center could make it more durable. And maybe consider coating it in a weatherproof material or spray. If you read through this entire comment and followed along with my reasoning, I salute you. You are now my brother though machining.
I think is important to weigh the board , I wonder if it´s heavier or lighter than a maple one.
Ya good call
happy to see u back
Thanks a ton
I laughed out loud when you said “it means an engineer grew the tree?” 🤣
use it as your normal skateboard for several months to get some real data on it. insane concentrated damaged is cool, but standard wear and tear is better
I need it since society is a mystery and I feel cautious about people
factory: working the hardest on new boards
braille: LETS F*CKING BREAK IT
Those are green urethane rails for impact protection and water sealing.
Ive had 3 lithe boards. They never lose their pop and they dont really snap. But after a while, they start to become bendy and soft. That being said, my last lithe board lasted me a year. It never razor tailed, and it also was impossible to chip.
Do ya know if riding it in the rain affects it?
So how much is that skateboard? I've been thinking about buying one, to start learning, I think this one would be the best investment and last me forever.
Not sure but check the stock levels first I think they are back ordered
The issue was definitely the car. Even though it broke, even my most destructive friends could hold onto this for YEARS. Great product, I don’t think any changes to be made unless there’s a full replacement/ refund guarantee. Maybe offer a replacement, for a discount if the return the broken board
Where can I buy one ? Theres no link ?? You don't even tell us what the company is ??
Still haven’t received it…ordered almost 2 years ago. Scam.
Seriously? Request a refund! They have got to give refund
@@brailleskateboarding Most of us never received it…
@@brailleskateboardingthey don’t respond to any messages, mails, Facebook, instagram, their website…worst company I’ve ever deal with…
That's insane 🤯😱. I doubt that the green rim could be made out of strong acrylic or fiber glass like they use for ice hockey boards on the outside of the rink.
Reason why I say ice hockey rink barrier boards because that has a strong & stable bounce whenever a player is knocked into the boards
The green is a Ptex plastic that is used on the sidewalls on snowboards
Interesting
If I had to guess, the green band hardens when it has a force being applied to it and soft when press slower and not as firm
The intro when Arran Kyro is introducing the board is so fricken funny at 0.25 speed. 😂
Could be a non-neutonian material, which on impact is hard as a rock and under no pressure is soft, then compressed into something to keep it under that pressure, you can probably say this non-neutonian material densifies and is super resistant. I might be wrong, but that orange stuff they are using on ballistic vests with non-neutonian material are crazy resistant.
Could be
I'm guessing the green material may be some fiberglass the biggest hint was it bouncing off the wall
I feel bad for the guys who made the board watching you guys absolutely destroy it😂😂
Ordered 2 of these in 2021 and have reached to the company multiple times with no results of a reply...
Dang it
I know what I'm watching tonight. Thanks for the reminder about flabbergasted epic film
So good haha
Just so you guys now... The SYS griptape is very very easy on the shoe. It works remarkable BUT only if you are into not grippy griptape. If you want a super sticky Grip like MOB you will not be satisfied with it because its just not enough friction. Plus if its a little humid outside or rainy it will be super slippy almost to the point of being unusable. I however like non sticky grip and dont skate in rainy/ humid eviroments so its perfect for me. Definitly worth giving it a shot. It can happen to save you alot of money..
love these video in the skate shop.