as a person, who went through all three (and even more), I can surely say that XP600 is the winner and DX5 is the worse. i3200 have the best quality for sure and have the most expensive printhead as well, but XP600 can print up to 100 sqft/hr! and with better quality than DX5. DX5 have the most expensive maintain - dampers, capping stations, wipers and etc. The best results I had are with the XP600 printheads, now I am with TX800 and I will remain with them
xp600 , i used from last year November , still running well. plenty of banners and stickers prints. when blocked lift the head and pour some cleaning solution over the bed. and press the button to let the head site for about 15 min. the cleaning liquid touches the head surface and smoothes the tiny holes. and after 15 mins, i press auto nozzle clean to push out the ink into head. then print 50mm long strip red to let the print head spray out the dark colour. then it runs well for rest of the day.
another tip. never remove the head for cleaning. bcoz the head is fragile. can break or get damaged easily. so clean while it is on the the printer. move over the waste bucket. spray with syringe method to flush out the nozzle that is blocked. once done. put more cleaning solution then fill the nozzel. this time fill and suck out the liquid back to syringe. this way u are making sure any dust or debris not stuck inside nozzle. so you r cleaning both heads outside and inside with cleaning solution. when not printing well. sometimes it is dampers get blocked or dry. so to check if dampers are good. use syringe try suck out ink. if the ink is coming easily faster. dumper is fine. if it is struggling. it is time to change the damper. dx11 is not ideal here in australia but im the only guy loving it due to almost no cost and highly profitable machine.
Nhi sir tshirt directly print nhi hoga uske liye aapko heat transfer krna pdega. Jyada jankari ke liye aap mujhe 9810940195 is no pr call ya whatsapp kre
sir your supplier telling wrong. EPSON i3200 is advance and updated version of DX5 so how quality of DX5 is better than i3200. for more details you can call or whatsapp me on 9810940195
Just started watching your all videos. From Oman
Lot's of Thanks sir 😊
Refer our channel to someone also 👍
as a person, who went through all three (and even more), I can surely say that XP600 is the winner and DX5 is the worse. i3200 have the best quality for sure and have the most expensive printhead as well, but XP600 can print up to 100 sqft/hr! and with better quality than DX5. DX5 have the most expensive maintain - dampers, capping stations, wipers and etc. The best results I had are with the XP600 printheads, now I am with TX800 and I will remain with them
Yes sir you are right and thanks for your valuable information. we hope next time you give us any chance to serve you.
Roses are Red Violets are Blue If The Title is in English The Video Should Be Too
Like I felt so hurt when I clicked
Q
Much obliged..
You said it betterment
You said it better
xp600 , i used from last year November , still running well. plenty of banners and stickers prints. when blocked lift the head and pour some cleaning solution over the bed. and press the button to let the head site for about 15 min. the cleaning liquid touches the head surface and smoothes the tiny holes. and after 15 mins, i press auto nozzle clean to push out the ink into head. then print 50mm long strip red to let the print head spray out the dark colour. then it runs well for rest of the day.
Thanks sir for your valuable suggestions.
how is your experience now xp600 head sir
still running just changed dumpers today@@HifriendsHello
another tip. never remove the head for cleaning. bcoz the head is fragile. can break or get damaged easily. so clean while it is on the the printer.
move over the waste bucket. spray with syringe method to flush out the nozzle that is blocked. once done. put more cleaning solution then fill the nozzel. this time fill and suck out the liquid back to syringe. this way u are making sure any dust or debris not stuck inside nozzle. so you r cleaning both heads outside and inside with cleaning solution.
when not printing well. sometimes it is dampers get blocked or dry. so to check if dampers are good. use syringe try suck out ink. if the ink is coming easily faster. dumper is fine. if it is struggling. it is time to change the damper.
dx11 is not ideal here in australia but im the only guy loving it due to almost no cost and highly profitable machine.
@@dorbin101
Thanks for your advice sir 🙏
How long is self life Epson XP-600 head as a your experience sir.
Very helpful video thanks ❤
You’re welcome 😊
Thanks for video. Please suggest some printer manufacturers. Tks
Sir call or whatsapp me on 9810940195
You need to get translated version for your channel seems very informative but I can't understand
Yes sir you are right but there is many languages. We can’t make translated versions in all languages.
Which machine is the best sir
sir i3200 is the best machine between these machines
Appreciate for your good information
Thanks sir for your valuable comments
My challenger printer machine margin problem.
Plzzz give men solution
sir ji eco solvent machine pe konse type ke job hum kar sakte hai please bataiye
Sir aap eco solvent machine pe bhut type ke media print kr skte h jaise flex, vinyl, oneway, back light, canvas, fabric etc.
Sir g ispe hum photo peper bhi print kar sakte hai fine quality main
Nhi sir ispe photo paper print nhi hoga
DX7 vs i3200 in quality printing? Please answer
sir DX7 head ab market se out dated ho chuka hai isliye ab ham uska comparison i3200 se nhi kr skte. abhi i3200 sbse best head hai.
I3200 is a lot better and with cheaper maintain. I have use both and i3200 wins for sure. Stay away from DX5 and DX7
Useful for technical peoples
Thanks sir for your valuable comments
i3200 Eco Solvent orginal ink price? i need
sir for price please call or whatsapp me on 9810940195
Sir any suggestions about dtf i3200 with powder shaker
Sir we not deals in dtf printers right now.
sir ji Eco Solvent Printer lena hai Please suggest
Sir aap mujhe 9810940195 is no pr call ya whatsapp kre.
thank you
Your always welcome sir.
Keep supporting us.
What are the best parts like board etc to purchase i 3200 machine
sir for price you can call or whatsapp us on 9810940195
i 3200 is good but inks are in hard to get in Zimbabwe
How much the ink price (USD) there ?
sir for price you can call or whatsapp us on +91 9810940195
Bhai iska size kya he 6ft ya 10ft
6 feet sir
👍 Informative
Thanks sir for your valuable comments
Very nice video.....
eco solvent printing machine pe t-shirt printing ho sakati hai kya
Nhi sir tshirt directly print nhi hoga uske liye aapko heat transfer krna pdega. Jyada jankari ke liye aap mujhe 9810940195 is no pr call ya whatsapp kre
What about dx7 gold heads
Sir DX7 head is also very better head but only few companies have DX7 heads.
the best DX7 is the one that you never buy. Same quality as DX5, but twice more expensive
My supplier is telling the dx 5 quality is better than the!i3200
Pls help
sir your supplier telling wrong. EPSON i3200 is advance and updated version of DX5 so how quality of DX5 is better than i3200. for more details you can call or whatsapp me on 9810940195
@@VISUALTECHNICALS
8:32
he lies a lot!
Sir
Dx5 head allwin 180 can possible to convert to i3200
Yes sir. Please call or whatsapp me on 9810940195
SIR I WANT CONVERT MY UV FLET BED MACHINE IN XP600 IT'S BETTER?
Sir please call me on 9810940195
Aur tx800 head ke bare me bataiye
Ji sir aap mujhe 9810940195 is no pr call ya whatsapp kre
Bhai hydrabad me apke office hai
Yes call me for more information
8178099902
😅 xp 1 year - dx5 2year - i 3200 😅 😄
Depends on you maintenance sir.
It may be 3 or 4 years
Quality is same 🤣
thanks sir for your valuable comments.
Uv print
Thanks sir for your valuable comments