Had to replace my mother-in-law's bumper on her 2016 M3. You saved me hours and plenty of misery. Thanks for taking the time to make this video. Your inventory checks should be an industry standard! Thanks again!!
This is one of the best DIY videos I have ever seen. By watching it, it is crystal clear exactly what needs to be done to take a 2014+ Mazda 3 front fascia off. Kudos to Maximus Meridius.
Is this 2 pieces to make the entire cover? I’m looking into replacing the cover but the one I’m looking at is only the bottom portion and around the headlights. There’s no grill and top portion above the grill on the one I’m looking to buy. Please advise.
Thanks so much for the excellent video. Great camera work, sequence flow, captions and music! This is really going to help me with a DIY fix to the front bumper.
Hi, Do i have to remove all the front just to get to the lower part. i just need to replace the bottom personally .EDIT: went up until the end and saw the screws so i can remove the front grill. Nice video, will probably change it myself and save lot's of money
Now I know why my bumper clip near the fender broke. My technician possibly forced it to pull out where there is a hidden screw behind it 🤦♂️ Is it also possible to replace the fog light bulbs even without taking off the bumper?
11:05 that plastic guard in front of the radiator, can I take that off? Mine is cracked and flimsy and I see no purpose to it. What do you think? And where can I get a fastener kit for the mazda cause I’m missing some
How did you remove the grille cover, cause I ordered a new one cause mine got scratched, but there only to plastic clips and the rest like some weird metal ones that I don't know how to remove, if you can plz tell me how. Plz & thanks
This will come handy, got hit by an A-hole today that went in reverse and was distracted with his phone. It didn't broke anything since it was slow but the right size of my bumper (the part at 7:29) poped out, my guess is that I could loosen the bolt there and just give it a push.
I don’t know what I appreciated more - the real time walkthrough or the awesome song selection! Thank you!
Музыка здесь мешает
Had to replace my mother-in-law's bumper on her 2016 M3. You saved me hours and plenty of misery. Thanks for taking the time to make this video. Your inventory checks should be an industry standard! Thanks again!!
I had to replace my horn and this video saved me a lot of work and I didn't waste my money at the dealer. THANKS A LOT!!!
ultra bummed out about the reason I'm looking this up but very happy to see such a good video detailling every little thing. thank you!
This is one of the best DIY videos I have ever seen. By watching it, it is crystal clear exactly what needs to be done to take a 2014+ Mazda 3 front fascia off. Kudos to Maximus Meridius.
THANK YOU so much for taking the time to show this. Much love from Toronto!
So happy this video exists. Thanks keeping it clear and simple!
Excellent video! Saved me lots of time removing the bumper from my 2015. Thank you!
I find it insane I have to do all of this just to repair a horn, but thanks for making it as easy to understand as possible.
Is this a RHCP cover? Victorian machinery or something? Great video, thanks.
Couldn't find a video for my Mazda 6, but this did the trick. Thanks!
Awesome instructions and the tunes are legit
Thanks @
Maximus Meridius, This is the best detailed video esp for the underside.
any chance on getting a video for the rear bumper removal??? (:
Replacing my horn, I have the service manual, but seeing it helps clarify what to expect. Thanks a bunch!
Is this 2 pieces to make the entire cover? I’m looking into replacing the cover but the one I’m looking at is only the bottom portion and around the headlights. There’s no grill and top portion above the grill on the one I’m looking to buy. Please advise.
Thank you for making this video, but those blocks of wood holding up the front end scare the shit out of me.
Thanks so much for the excellent video. Great camera work, sequence flow, captions and music! This is really going to help me with a DIY fix to the front bumper.
Thank you. Just watched this before changing my 2014 Mazda 6 bumper, and all went well.
Do you know if a 2017 front bumper on a mazda 2 is the same procedure.
Great video
Can I replace this bumper with my Mazda 3 2010?
Perfect video! Instructions were very clear step by step thank you!
Any suggestions on unscrewing the screws that won't come out or even loose with a screwdriver or drill?
Hi, Do i have to remove all the front just to get to the lower part. i just need to replace the bottom personally .EDIT: went up until the end and saw the screws so i can remove the front grill. Nice video, will probably change it myself and save lot's of money
Beautiful video, so exact and detailed, thanks for the explanations and the good music.
I have the same car only that it came with the headlamp washer, I need to replace that entire system do you know anything about it?
Why didn’t you turn the tires to your favor is a lot easier like that
I really like that front bumper on Mazda 3. I just really wish this can put in my Mazda 3 2008. Would be awesome!
great demo, thanks for all the info. have to do my soon.
Awesome vid... Very helpful. Mind making a video removing the center consol as well? or perhaps the Cluster panel?
Now I know why my bumper clip near the fender broke. My technician possibly forced it to pull out where there is a hidden screw behind it 🤦♂️
Is it also possible to replace the fog light bulbs even without taking off the bumper?
GREAT video! Thanks for posting. I just needed to replace the grill on my 2016. This was a great tutorial.
Does anybody know where I can find the bolt/screw specs if I needed to try sourcing them from Home Depot or elsewhere?
Good video. Can’t believe I’ve got to do all this just to get to windscreen washer motor.
Any idea how different a 2016 bumper would be? From an untrained eye they don't look terribly different.
Thanks for your video. Really help me. I want to remove the bumper to uninstall the headlights.
11:05 that plastic guard in front of the radiator, can I take that off? Mine is cracked and flimsy and I see no purpose to it. What do you think? And where can I get a fastener kit for the mazda cause I’m missing some
Dude this video really helped me, thanks for posting!
Is it possible to take off the plastic cover behind the grill? (for more airflow)
Thanks for a very informative video!
What mm are the nuts in side the wheel liner ??
Good pace. Great vid.
Awesome thank you so much, just worked on my 2018 m3.
What's the chrome bits on the front bumper called? Can't seem to find them anywhere
6:00 you timed that fastener pop on purpose huh, I see u
Thank you. Very good video show everything in detail. Help me a lot.
Best how to video I’ve seen.
great video... amaizing music¡¡¡ who is?
really terrific video. thanks!
just one question... why are you wearing gloves? lol... ok ok.. great video. thanks
They are cut/scratch resistant for all the sharp edges and small spaces
Thank you sooo much!!! 👍🏻
Thanks pro 😍😘👍
Damn, I need to do all that because my window washer is either cracked or unplugged.
Very helpful video, thanks
Exelent video bro !
great video
Many thanks 😊
excelente video muy bien explicado gracias :D
Just did this thanks to this video....GREAT JOB love it!!! Took me an hour but with it. Time to scare some kittys
Thanks so much for the video... and the music, it sounds like stellio cantos from American Dad hahaha
How did you remove the grille cover, cause I ordered a new one cause mine got scratched, but there only to plastic clips and the rest like some weird metal ones that I don't know how to remove, if you can plz tell me how. Plz & thanks
Great video but the music was annoying. Mute worked though...✌🏼
great video. helped a ton
10:16 this is just for me to have a bookmark
This will come handy, got hit by an A-hole today that went in reverse and was distracted with his phone. It didn't broke anything since it was slow but the right size of my bumper (the part at 7:29) poped out, my guess is that I could loosen the bolt there and just give it a push.
Does the entire bumper cover have to come off to remove/replace just the grill chrome?
Yes, it's screwed in from the back of the bumper cover.
@@DatBly
can you help
do i need to remove the bumber to replace the ac condensor.thx
Excellent
Like the song
Thanks buddy
the vestry of my life solved i was about to take all the clips and the bolts :)