@@MarkusDelRey Cable is from alirxpress. Not original. But i have also software from there. Mostley its works good also with inpa whas working good. Oke now than i need to chek the usb cable if its found ?
@@erensen5226 programı yüklerken setup dosyasının üstünde VCDSloader.exe dosyasını kopyala programı nere kurduysa o klasörü aç oraya yapıştır. crak mı ne diyorduk ya eskiden öyle yapcan işde
@@erensen5226 nedemek aga sağol. klon almıştımda geri iade ettim. özelliği açıyorum. açık gösteriyor ama çalışmıyor.oda benim arabadan kaynaklanıyordu. yeni uğraşıyorsanız bilmiyorsanız önce yedekleme alın hocam. sonra servise gitmek zorunda kalırsınız.
Read install order..... Vcds loader exe copy to vcds file on order C:/ Do not start the exe from Desktop.... Delete this....and copy vcds loader exe is sucsesfull then Make a link from this to Desktop. Then its run, i Has the same problem
Read install order..... Vcds loader exe copy to vcds file on order C:/ Do not start the exe from Desktop.... Delete this....and copy vcds loader exe is sucsesfull then Make a link from this to Desktop. Then its run, i Has the same problem
Hello, is it solved yet? I have the same problem
Thanks for your time, I don't have the CD to install.
Can someone guide me through please?
What does ALL of the writing on the device say?
hex-v2 dual-k & can usb interface for vcds h10-000000 assembled by www.ross-tech.com
2019 hex2
does the usb cable have to be connected to the car when testing?
yes
Maibe is cable blocked after internet conection is not vcds original, you need flash it.
how is it updated?
How flash it?
Please explain how to flash it 🙏
Loader instaled? Antivirus or defender blocked? Aded vcds to Firewall block to connect internet?
I have same problem antivirus or defender is blocked. My loader does not work . Only the original svds words what can i do for the samenfault
Windows see conected cable? Maibe is cable blocked is not original, mine was too after reflash works
@@MarkusDelRey I had an Inpa cable from BMW for this maybe the laptop sees that, is that possible? otherwise I'll have to delete it and do it again
@@MarkusDelRey Cable is from alirxpress. Not original. But i have also software from there. Mostley its works good also with inpa whas working good. Oke now than i need to chek the usb cable if its found ?
@@MarkusDelRey What you mean reflash
You have try COMM 3 port.
cd denyükleme yaptığın set-up açtığın cizmin üstündeki kopyala ve ross tech klasörüne yapıştır problem ortadan kalkıcaktır
dostum bende aynı hatayı alıyorum yardımcı olurmusun
@@erensen5226 programı yüklerken setup dosyasının üstünde
VCDSloader.exe
dosyasını kopyala
programı nere kurduysa o klasörü aç oraya yapıştır.
crak mı ne diyorduk ya eskiden öyle yapcan işde
@@senyaparsaniyiolur çok teşekkür ederim brom hallettim birde şeyi soracaktım sendeki klon cihaz mı
@@erensen5226 nedemek aga sağol.
klon almıştımda geri iade ettim.
özelliği açıyorum. açık gösteriyor ama çalışmıyor.oda benim arabadan kaynaklanıyordu.
yeni uğraşıyorsanız bilmiyorsanız önce yedekleme alın hocam. sonra servise gitmek zorunda kalırsınız.
@@senyaparsaniyiolur çok sağol bro da ben sadece arıza kodu okuma silme ve kalibrasyon için işe yarar mı onu merak etmiştim kodlamayla işim yok yani 😄
etkö saanut mukana ohjeita?
Have the same proplem - it can not fixed so i change it and the proplem is gone!!
Did you change the tester?
@@alinh.8 No i change the cable it was a Problem!!
what is thé solution
I did not get one
Read install order.....
Vcds loader exe copy to vcds file on order C:/
Do not start the exe from Desktop.... Delete this....and copy vcds loader exe is sucsesfull then Make a link from this to Desktop.
Then its run, i Has the same problem
Please help me
yes , thank you
Help me bro
Muy bien vídeo crack. No me sirvió para nada
did you fix the problem?
No
I have same problem
no, the problem was not fixed :(
ya beyler çok basit video da ki gibi crack yapın olayı büyüttünüz
@@senyaparsaniyiolurnasil
Sslve mi puoi aiutare grazie
I think the problem is that u are using windows 10, if u change it to windows7 it will work
what is thé solution ??? 🙄🤔
i did not get one
I have same problem
i still haven´t got it to work
Read install order.....
Vcds loader exe copy to vcds file on order C:/
Do not start the exe from Desktop.... Delete this....and copy vcds loader exe is sucsesfull then Make a link from this to Desktop.
Then its run, i Has the same problem
@@jlo-gv6mc bende öyle diyordum kopyala yapıştır
@@jlo-gv6mc your a star!!! Been 2 hours fighting and than found your comment you should do video on TH-cam nice one pal thank you
@@marcincnc no problem... thank you....have fun