Hello there, new sub here. I just wanted to say thank you! Of all the videos out there on this exact topic I found your video easy to understand and informative without music blaring over you talking and I was starting to freak out that I messed something up, my wife probably gonna think I bought a whole new truck when the bank statement hits and I atleast need this multi thousand dollar 1/24 scale rig to move! Thanks again 👍
Just ordered one for my Kyosho mini z Jeep conversion. The steering servo on the Kyosho is hopeless so ive found a replacement which forces me to change all the electric. If I have to change the whole lot I might as well buy this quality ESC
Great vid as always btw!👌 I just got the furitek lizard recently, and I got a question about it. How do you turn off the power in the actual vehicle now, while the furitek is connected, as turning off the vehicle does not fully turn it off. The light remains on, when I turn off the power from the vehicle.
Question: does the FOC function with the brushed motor? Like will it have the torque at low crawl? I'm on the fence about getting the lizard only versus the whole brushless kit
from the website "Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response." i haven't had any issues and i have two of their systems
If it's for the gladiator, I wouldn't count on it if I were you. Just trying to save you a huge headache if you have the gladiator model. I'm on my 2nd furitek iguana pro now, first one had issues both my fault and otherwise and it's replacement will not connect to my scx24 motor, only servo. Original 2-in-1 works just fine. I've followed so many guides and forums, spent a long time and patience with it to no avail. I'm just highly disappointed. I may just go with another TX/RX setup later on, but its getting expensive already 😬
@@dakotasander5745 Then it's probably not the gladiator. Glad it worked for you, though. Just wish the companies would make note of their compatibility and just keep the simple esc/rx instead of just one model having a completely different design than the rest.
@@MiguelCortez I must’ve burnt out the mofo Buzzsaw 50 motor with the stock ESC. I thought it was just the esc that I fried. Because the furitek works fine with the stock motor installed.
@@MiguelCortezI head there was something you only could upgrade regarding the c10 and deadbolt only .. what upgrades is limited to those two only ? I’m new to hobby
So if the Lizard is an ESC, why keep the old stock ESC in there? Can one not just run the Lizard as a replacement for the stock ESC and save the space and weight? Thanks! I just can't get my head around that being a new guy. :)
@@MiguelCortez Ah Ha! Thanks! Since they are both referred to as ESC's, it was super confusing to someone looking to buy their first RC and starting from zero knowledge. Watching your series and it's much appreciated as a newb! So if one got really into this, is there a stand alone receiver that could be installed to save weight and space? Or is that getting into the need for a new controller? Thanks! Have a great weekend!
@@MiguelCortez Yep, your right! Just looked it up. I guest that's for the hardcore into it guys, not the beginners! LOL! Thanks alot! Have a good weekend!
@@MiguelCortez battery straight into the stock receiver works I get power. But when I plug it into the lizard I get nothing. I have the v1 esc. And I have it plugged into the ch2 slot but still no power.
Hello there, new sub here. I just wanted to say thank you! Of all the videos out there on this exact topic I found your video easy to understand and informative without music blaring over you talking and I was starting to freak out that I messed something up, my wife probably gonna think I bought a whole new truck when the bank statement hits and I atleast need this multi thousand dollar 1/24 scale rig to move! Thanks again 👍
Thank you! This helped a lot!
👍👍👍
I'm also interested in this Furitek stuff. It looks very nice.
It is very nice 👌
Thanks!
Just ordered one for my Kyosho mini z Jeep conversion. The steering servo on the Kyosho is hopeless so ive found a replacement which forces me to change all the electric. If I have to change the whole lot I might as well buy this quality ESC
Awesome upgrade!!
Great vid as always btw!👌 I just got the furitek lizard recently, and I got a question about it. How do you turn off the power in the actual vehicle now, while the furitek is connected, as turning off the vehicle does not fully turn it off. The light remains on, when I turn off the power from the vehicle.
I just unplug the battery wish there was a better way lol
@@MiguelCortez oh OK, that's what I'm doing as well.
Question: does the FOC function with the brushed motor? Like will it have the torque at low crawl? I'm on the fence about getting the lizard only versus the whole brushless kit
from the website "Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response." i haven't had any issues and i have two of their systems
So is the stock esc/rec only used for the receiver end? I'd like to run 1 of these Furiteks but pair it with a stand alone GT3 receiver instead.
Yes correct
Won’t work on the newer Axial’s like the Gladiator cause there isn’t a channel 2 you’d have to get a new receiver as well. Awesome vid.
Correct 👍
How is the esc & motor noise? Did the new esc quiet the vehicle? Thx
The esc did quite the vehicle 👍
I'm thinking about getting this and upgrading to the flysky gt5 receiver/controller, would it install the same way or would it even work?🤔
Idk might be different give them a call 🤙
If it's for the gladiator, I wouldn't count on it if I were you. Just trying to save you a huge headache if you have the gladiator model. I'm on my 2nd furitek iguana pro now, first one had issues both my fault and otherwise and it's replacement will not connect to my scx24 motor, only servo. Original 2-in-1 works just fine. I've followed so many guides and forums, spent a long time and patience with it to no avail. I'm just highly disappointed. I may just go with another TX/RX setup later on, but its getting expensive already 😬
@@taylor22222222 I've been running that exact setup for a few weeks and love it, I feel like I get SOOO much more control and customization
@@MiguelCortez the newest esc doesnt have a channel 2 but I got it to work with the flysky
@@dakotasander5745 Then it's probably not the gladiator. Glad it worked for you, though. Just wish the companies would make note of their compatibility and just keep the simple esc/rx instead of just one model having a completely different design than the rest.
At first only my servo worked. Then back updated to 2.3 and it worked for a minute and now no more throttle response. Any ideas?
🤔🤔🤔 is everything plugged in right ? Did you check for updates? Calibrate throttle?
@@MiguelCortez I must’ve burnt out the mofo Buzzsaw 50 motor with the stock ESC. I thought it was just the esc that I fried. Because the furitek works fine with the stock motor installed.
@@MiguelCortez spoke too soon. Very weak/slow froward throttle but normal reverse power. Maybe I need a new factory esc.
Can you use this furitek for any scx24 or just the deadbolt
Any
@@MiguelCortezI head there was something you only could upgrade regarding the c10 and deadbolt only .. what upgrades is limited to those two only ? I’m new to hobby
Thanks, I lit my stock on fire before getting to this video lol
Lamooo good luck bro
So it actually still works! I am astonished and amazed lmao
So if the Lizard is an ESC, why keep the old stock ESC in there? Can one not just run the Lizard as a replacement for the stock ESC and save the space and weight? Thanks! I just can't get my head around that being a new guy. :)
You need something to connect to your transmitter (remote)
@@MiguelCortez Ah Ha! Thanks! Since they are both referred to as ESC's, it was super confusing to someone looking to buy their first RC and starting from zero knowledge. Watching your series and it's much appreciated as a newb!
So if one got really into this, is there a stand alone receiver that could be installed to save weight and space? Or is that getting into the need for a new controller? Thanks! Have a great weekend!
@@wingnutbert9685 furitek offers the avatar reciever transmitter combo but its pretty pricy
@@MiguelCortez Yep, your right! Just looked it up. I guest that's for the hardcore into it guys, not the beginners! LOL! Thanks alot! Have a good weekend!
I just bought one I plugged in everything according to the video and I don’t even get power to anything. I’m thinking I have a dud.
Did you plug everything in right? Take it to your local hobby shop
@@MiguelCortez battery straight into the stock receiver works I get power. But when I plug it into the lizard I get nothing. I have the v1 esc. And I have it plugged into the ch2 slot but still no power.
Mine flashes blue even after throttle calibration. And does nothing...
🤔🤔 update firmware ?
@@MiguelCortez I did that I finally found the flashing blue light means reciever connection is bad. So I'll be contacting furitek for a warranty
Won't connect, about 2 throw away
😂😂😂
I run the Komodo and lizard and will not go back to anything else!
The slow control is Awesomesauce 👌