congrats on the hoss boss. Kinda sucks there was typical yet obvious ignored issues from factory. And for this kind of money. around 12:41ish I saw the bolt that runs through the stick ram. ouch I wouldn't want that treaded bolt working boring out the inners of the end of the ram. Might want to change that out. You won't be pulling this with the 802 lol.. its a mammoth! good thing you park your fleet in garage. I have to go up flight of stairs to get mine out. You should get a 3d printer you could make all those handles and even backing for striped bolts like on that step. looking forward to seeing it in action. Im going through my Lt5h lesu Im going rework the inners instal the lights/sound and rerun the lines. I can tell a few were cut a smig short and one had a kink in the lift ram to to installation. but I do love that little booger. fun as heck.
I still need to get my little guy in the dirt but it is loads of fun. I have to rework the controls. I cannot get used to the way they set it up. This 6015B is big and awesome but it’s not the A class of the 6015b’s out there either. It was a bit cheaper but maybe not cheap enough. I ran into a lot of quality issues with this thing. But that being said I am happy with the major things like the hydraulics and the crawler system. I am going to show all the issues I have with this particular machine so everyone is aware of what they might get. It’s not always the best quality equipment you wind up with. I think 90 percent of the screw taps are stripped on this thing so I am going to start going thru it a bit at a time. I agree with you that I need a 3d printer. It’s getting to be more and more apparent.
Been looking into getting one. Heard they are way under powered, but can always upgrade. I'm debating on this heavy beast or the new XD RC excavator. Can't wait to see it digging.
@@mnrcbasher877 mine is all brushless. The crawler tracks are brushless and the slew (rotation) motor is brushless. The pump on this thing is massive and brushless motor as well. I have not done a Dig test in hard soil yet. This thing was not put together well. Many screws falling out. But the mechanical and hydraulic system seams pretty good so far actually really good so far. It handles very smooth and seams powerful. I will do a hard soil dig test soon. This machine I got is different from many of the other machines out there. It’s not as nice a quality or finish but I’m not disappointed in what I got either.
11th Commandment: Thou shall not covet thy neighbors toys! But shit I'm so jealous. Nice machine even for the price. I hope this machine gives you many hours of enjoyment. Thanks for letting us see your unboxing and comments. Cheers
I like to show em as I receive them, good, bad and the ugly. The thumbscrews are just for looks. I did some rebuild videos on this 6015B and you can really see it in all its parts. It really needed a lot of work to get it where I wanted it but I really like it now even more than when it was new.
Awesome video. Id bee pissed about all the issues for the price you paid id be pissed. It almost seems it was used and bucket was repainted and they decided it was too big for them and they cleaned it and sold it.
It's made by an unknown Chinese company. The bucket pins are made of screws, which is impossible. You could have bought a great model for twice the money.
That thing is so massive omg 😱 where did you find that 😆 !anyhow I would of never Imagined it to be that big, I can’t wait to see if it digs as good as it looks , It will keep you busy loading and unloading that beast , sucks about the glass missing but I can’t wait I’m as excited as you !!!
It is definitely an earth mover! That bucket holds a lot of material. I have yet to test out it’s digging capabilities. Wait till you see how well it crawls! It’s pretty awesome.
@@digitrc that is a monster machine I still can't believe it I'm beyond impressed I'm living through you they are so expensive .I'm happy to share the experience with you . Let's rc dig it
@@DAmariosTravels wait till you see it loading the Volvo dumper. The scoop is so big and moves so much material. I max load the Volvo in no time. It’s pretty cool 😎.
Hey I just picked one of these up second hand for a steal, do you have a place where you get parts or a link to the manual? having trouble finding info
Manuel, parts?!! 😂😂😂. No Manuel, parts are just a hunt to see what will fit. More a visual comparison to what you have and what you need. Calipers are your best friend to finding parts that will be the right fit. Wish I could be more help but that’s my experience thus far. 🤷♂️. That’s with all my hydraulic fleet!
@@TheTismo I put in a link to the hydraulic oil I use. It has worked well in all of my hydraulic machines no matter the size with good performance even in cold weather. TRIAX Atros Multivis HVLP 46 Full Synthetic Hydraulic Oil, 300% Additive Anti-Wear Boost, 7,000-10,000 Hour Life, Arctic Grade -54 Cold Flow and High Temp Operations (1 GAL) a.co/d/gP9hdY7
@@The-Warm-voice1359 all computer radios are a little bit complicated. But you get more options with mixes with the more complication so it’s a good trade!😁😁
@@The-Warm-voice1359 I love the I6s radio. It’s super simple and works well for most applications and is very affordable. I have on a couple occasions ran out of mix options with it. It needs to have 2 to three more mixes available for how I want to set up my radios for these hydraulic machines. Especially the tracked machines.
Well since scams are so prevalent these days there are no guarantees. I got mine off of AliExpress and toucanhobby. I’ve done pretty good so far. No box of rocks yet. I’ve always got a working machine, some better quality than others. You can also find some things on rc4wd.
I like it. It’s not the same as yours and it’s not as nice a finish as yours. Different machines for sure. But I still really like it. It’s so big. I’m impressed with the crawler system on it. It moves this machine around without any issues. Way better then my 4200xl stock drives were. And everything operates so smooth. I have some work to do to bring it up to good quality but that’s how it is sometimes.
It’s a nice machine don’t get me wrong, BUT, For how much money that thing cost I wouldn’t even have finished unpacking it. I would’ve called and returned it. Very Shoddy craftsmanship no glass in the cab, unacceptable, radiator not even attached to anything, unacceptable. Not to mention for something that cost $5000 they can’t give you better decals than some cheap paper ones, give me a break.
I agree 💯 . BUT, this has provided a platform for me to demonstrate that you can take a lemon and make lemonade. I just finished publishing a series of videos on my channel showing the work I did on this machine to make it better, way better. It was a minimal cost and only took a bit of time. It was a fun project too.
It's made by an unknown Chinese company. The bucket pins are made of screws, which is impossible. You could have bought a great model for twice the money.
@@bryanfresh5857 I’m not sure I would use the seller I went thru again so I wouldn’t recommend them to you. I did sfmodel. They were ok with customer communication but not totally honest either. It’s a gamble out there.
I got it on AliExpress. There are a couple different machines out there in the different stores on AliExpress. I went with a lower end machine but it’s still a pretty good one. It will need more TLC to get it where I want it but it has good bones. The track drive system is super satisfactory so far. It drives extremely well for the size and weight of this machine. On AliExpress just type in 6015B and it will bring up options.
Is this a SF Model product? In subsequent videos, you seem to be suffering from frequent failures. I too have purchased machines from SF Model and the metal is brittle and many screws have become unusable. It also leaked oil so badly that I had to replace most of the tubes. SF Model's Alliexpres account has 100% high ratings, but I believe that is a fabrication. I would not recommend that store.
For sure. It’s not as nice as the other 6015b models. I don’t think it is as near as nice a finish as I’ve seen on other models. It was quite a bit cheaper and I see why. It’s nothing that can’t be fixed. It’s got great mechanicals though. I did find the pressure gauge. They hid it.
@@dannycrover8710 the hoses are hard and brittle it seams. I bust two lines on my video I just released this morning. Check it out. I don’t hide anything on these machines. If it’s a problem I’ll expose it for all to see. It’s not a deal breaker but it is a disappointment. I’m working on a fix for it. New road Ep-2. Beast or bust. Hg p802 hill climb with 102pound 6015B load. Will it make it or break? th-cam.com/video/NcfV1bmhvos/w-d-xo.html
@@dannycrover8710 yeah and it’s an odd size. Because it’s so big and the lines are much larger then other rc hydraulic equipment. It moves a lot of oil fast!
@@hakimikymi9928 that’s cool. These excavators are a lot of fun. I still have fun with all mine even the Huina 1/16 model. All sizes for different jobs just like In real life.
Ohh dude are you kidding me its huge i will never buy something like that even How many persone you need Until carry it congrats anyway ...so i have surprise for you But i won't to tell you now Until the time is right 👍
Oh I’m curious now. Can’t wait for the surprise. This is the largest machine I will add to the fleet for sure. I can manage it by myself for now but I am getting older😁.
@@digitrc l😂l Am getting older 2 ..yeah i swear to god i have surprise But i will tell ya next week Or i will try make video about it But that damm i don't know How ..anyway wait 4 it 😊
@digitrc twice the size of the 4200xl? Then I think they false advertise the 4200xl as an 1/12. Maybe it's more of a 1/14 instead. I checked the price of the 1/12 cat, it's like $5k plus. Love to own one but out of the budget.
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
Nice excavation machines 👍
NICE!
I need to finish assembling my Lesu CAT 374. I've had it since March 2020.
Yes, you defiantly need to finish that Lesu. What a fine machine that is!! I understand taking your time on it though.
What a beautiful mechanism ! 👍
Thank you. It is a pretty nice machine. 👍😊
cool unboxing and awesome rc,great video
Thank you very much.
@@digitrc 😁👍
Fantastic excavator
It really is something!😁👍
congrats on the hoss boss. Kinda sucks there was typical yet obvious ignored issues from factory. And for this kind of money. around 12:41ish I saw the bolt that runs through the stick ram. ouch I wouldn't want that treaded bolt working boring out the inners of the end of the ram. Might want to change that out. You won't be pulling this with the 802 lol.. its a mammoth! good thing you park your fleet in garage. I have to go up flight of stairs to get mine out. You should get a 3d printer you could make all those handles and even backing for striped bolts like on that step. looking forward to seeing it in action. Im going through my Lt5h lesu Im going rework the inners instal the lights/sound and rerun the lines. I can tell a few were cut a smig short and one had a kink in the lift ram to to installation. but I do love that little booger. fun as heck.
I still need to get my little guy in the dirt but it is loads of fun. I have to rework the controls. I cannot get used to the way they set it up.
This 6015B is big and awesome but it’s not the A class of the 6015b’s out there either. It was a bit cheaper but maybe not cheap enough. I ran into a lot of quality issues with this thing. But that being said I am happy with the major things like the hydraulics and the crawler system. I am going to show all the issues I have with this particular machine so everyone is aware of what they might get. It’s not always the best quality equipment you wind up with. I think 90 percent of the screw taps are stripped on this thing so I am going to start going thru it a bit at a time. I agree with you that I need a 3d printer. It’s getting to be more and more apparent.
@14:44. Screw the glass i got a battery! Funny and awesome! @ 14:44. Semper Fi? 😉 Great unboxing man...
Any little extra bonus is a win!😉. Thank you.
Very very awesome rc
Yes it is. Very big and very powerful.
Been looking into getting one. Heard they are way under powered, but can always upgrade. I'm debating on this heavy beast or the new XD RC excavator. Can't wait to see it digging.
What part of it have you heard is under powered? The crawler track system or the hydraulics?
@@digitrc the Hydraulic part. Is it all brushless now? Brushless drives you know?
@@mnrcbasher877 mine is all brushless. The crawler tracks are brushless and the slew (rotation) motor is brushless. The pump on this thing is massive and brushless motor as well. I have not done a Dig test in hard soil yet. This thing was not put together well. Many screws falling out. But the mechanical and hydraulic system seams pretty good so far actually really good so far. It handles very smooth and seams powerful. I will do a hard soil dig test soon. This machine I got is different from many of the other machines out there. It’s not as nice a quality or finish but I’m not disappointed in what I got either.
@@digitrc they must've updated it than. Looks pretty good! Heavy beast for sure! Can't wait to see what you think of it's digging capabilities
Espectacular
Thanks 😊
This particular one was definitely built on a friday🤣
😂😂😂 for sure 👍.
Very very very good video and sound ! Great!
Greetings from Zagreb / Croatia
Thank you very much! I appreciate that. Great to hear from you all the way from Croatia. Thank you for watching.
Have a great day. 😁
Wow awesome
Thank you. It is pretty awesome.
11th Commandment: Thou shall not covet thy neighbors toys! But shit I'm so jealous. Nice machine even for the price. I hope this machine gives you many hours of enjoyment. Thanks for letting us see your unboxing and comments. Cheers
Also odd question. Are the thumbscrews on the top of the black boxes actually oil dipsticks for the hydro sauce?
I like to show em as I receive them, good, bad and the ugly. The thumbscrews are just for looks. I did some rebuild videos on this 6015B and you can really see it in all its parts. It really needed a lot of work to get it where I wanted it but I really like it now even more than when it was new.
I bought a lot of scale looking screws. & nuts to reinforce some areas on my Lesu 374.
All from RC4WD
Are they as nice as the Lesu bolts? Those on my skid steer are very nice quality from Lesu.
Awesome video. Id bee pissed about all the issues for the price you paid id be pissed. It almost seems it was used and bucket was repainted and they decided it was too big for them and they cleaned it and sold it.
Meh, you win some you lose some. This wasn’t a win but not a total loss either.
It's made by an unknown Chinese company. The bucket pins are made of screws, which is impossible. You could have bought a great model for twice the money.
That thing is so massive omg 😱 where did you find that 😆 !anyhow I would of never Imagined it to be that big, I can’t wait to see if it digs as good as it looks , It will keep you busy loading and unloading that beast , sucks about the glass missing but I can’t wait I’m as excited as you !!!
It is definitely an earth mover! That bucket holds a lot of material. I have yet to test out it’s digging capabilities. Wait till you see how well it crawls! It’s pretty awesome.
@@digitrc that is a monster machine I still can't believe it I'm beyond impressed I'm living through you they are so expensive .I'm happy to share the experience with you . Let's rc dig it
@@DAmariosTravels wait till you see it loading the Volvo dumper. The scoop is so big and moves so much material. I max load the Volvo in no time. It’s pretty cool 😎.
Perfection. Can i ask you plz why the stickers have a Greek name on them? "Sotiriadis"
That’s the stickers it came with. It is a grecian mining company I believe. I have not researched the origins of the “Sotiriadis” company.
Maybe ask, who or where did you purchase from? I bought one also that is on its way and wondering if from same person
Sf model store on AliExpress.
Where do you get something like this?
Nice, looks like just 3 or 4 scoops to fill up the Volvo haul truck.
The 6015 ,who makes it?
Yep it’s a really nice big bucket. I’m not sure who made this 6015B. I know there’s a couple different ones out there and they are different.
@@digitrc who sells this one
@@terryperrott8567 I got it on AliExpress.
Keren gaesss. Tapi harganya mahal😂
It is too bad that this hobby is so expensive to get into. It takes a lot of saving up to build up a nice construction fleet.
Wow that thing is huge must be like 80 pounds
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Close but the scale in the video shows exactly how much the dry weight is.
@@digitrc 102 pounds that is allot of work to carry for an RC
@@carloshnunez ouch my back!😁😂😂. That’s a lot of weight for an rc. Transportation challenges lie ahead I’m sure.
Hey I just picked one of these up second hand for a steal, do you have a place where you get parts or a link to the manual? having trouble finding info
Manuel, parts?!! 😂😂😂. No Manuel, parts are just a hunt to see what will fit. More a visual comparison to what you have and what you need. Calipers are your best friend to finding parts that will be the right fit. Wish I could be more help but that’s my experience thus far. 🤷♂️. That’s with all my hydraulic fleet!
@@digitrc what about a specific type of hydraulic oil? appreciate your help
@@TheTismo I put in a link to the hydraulic oil I use. It has worked well in all of my hydraulic machines no matter the size with good performance even in cold weather.
TRIAX Atros Multivis HVLP 46 Full Synthetic Hydraulic Oil, 300% Additive Anti-Wear Boost, 7,000-10,000 Hour Life, Arctic Grade -54 Cold Flow and High Temp Operations (1 GAL) a.co/d/gP9hdY7
Where did you purchase this from?
PL18 EV the best engineer radio, all my vehicles are hook up to mine 😍 and that’s is a sweeeeet machine if I had the cash now I’d buy one
I love that radio!!! Even for simple 4 channel ops it feels so nice! I can’t wait to start getting my other machines moved over to it!
@@digitrc i feel like it's a littel complicated?
@@The-Warm-voice1359 all computer radios are a little bit complicated. But you get more options with mixes with the more complication so it’s a good trade!😁😁
@@digitrc i agree But i see FS i6s its to Easy with mix l😂l Even that radio T6S PRO 4 new komat`su WA480 2022 i feel it's complicated 2 🙄
@@The-Warm-voice1359 I love the I6s radio. It’s super simple and works well for most applications and is very affordable. I have on a couple occasions ran out of mix options with it. It needs to have 2 to three more mixes available for how I want to set up my radios for these hydraulic machines. Especially the tracked machines.
Where would i be able to purchase Rc's like this because I don't want to get scammed on amazon or any other websites
Well since scams are so prevalent these days there are no guarantees. I got mine off of AliExpress and toucanhobby. I’ve done pretty good so far. No box of rocks yet. I’ve always got a working machine, some better quality than others. You can also find some things on rc4wd.
Karen bos senggol dong 👍
Im afraid to ask how much ????
How much does this machine cost?
Too much! But shipping can be very expensive for this weight of machine. Check out AliExpress for current pricing. 😁👍
Need to put a Spring on those steps so they auto retract.
Yes I need a mechanism for the stairs for sure. 👍
Tem o projeto dela
how and where i can purchase this.
Checkout toucan hobby. They have an online store.
Congratulations mate🥳 how do you like it?
I like it. It’s not the same as yours and it’s not as nice a finish as yours. Different machines for sure. But I still really like it. It’s so big. I’m impressed with the crawler system on it. It moves this machine around without any issues. Way better then my 4200xl stock drives were. And everything operates so smooth. I have some work to do to bring it up to good quality but that’s how it is sometimes.
How can i get like it this where did you buy it
AliExpress. 👍
@@digitrc thank you my bro 🌹
@@ibrahimking9790 anytime!
How much money is that
💪🦵
46.5kg is not to be sniffed at ) so cool
Gives this machine some weight to throw around for sure. And it’s sure footed!
where from U buy sir??/
AliExpress
not bad for 15k
Not bad at all.
Where can I purchase this?
AliExpress
Where can I get one?
I got mine on AliExpress.
It’s a nice machine don’t get me wrong, BUT, For how much money that thing cost I wouldn’t even have finished unpacking it. I would’ve called and returned it. Very Shoddy craftsmanship no glass in the cab, unacceptable, radiator not even attached to anything, unacceptable. Not to mention for something that cost $5000 they can’t give you better decals than some cheap paper ones, give me a break.
I agree 💯 . BUT, this has provided a platform for me to demonstrate that you can take a lemon and make lemonade. I just finished publishing a series of videos on my channel showing the work I did on this machine to make it better, way better. It was a minimal cost and only took a bit of time.
It was a fun project too.
It's made by an unknown Chinese company. The bucket pins are made of screws, which is impossible. You could have bought a great model for twice the money.
Get in the cab and start the engine🤣
It’s almost big enough! 😂
Hey bud love you videos. Where did you buy this machine. I’ve been looking at toucan hobby
Thank you so much for your support. I got it on AliExpress.
I apologize i meant should I goto a particular seller on there ?
@@bryanfresh5857 I’m not sure I would use the seller I went thru again so I wouldn’t recommend them to you. I did sfmodel. They were ok with customer communication but not totally honest either. It’s a gamble out there.
Did they not sell you the machine that was advertised? Because I’ve seen another 6015B and it was different. It was also on AliExpress
Saya juga mau punya excavator cat.tapi apalah daya tidak punya 💰😂😂
Save up and make that your goal and you will eventually have one. 👍
Can you tell us where you got in from?
I got it on AliExpress. There are a couple different machines out there in the different stores on AliExpress. I went with a lower end machine but it’s still a pretty good one. It will need more TLC to get it where I want it but it has good bones. The track drive system is super satisfactory so far. It drives extremely well for the size and weight of this machine. On AliExpress just type in 6015B and it will bring up options.
Is this a SF Model product?
In subsequent videos, you seem to be suffering from frequent failures.
I too have purchased machines from SF Model and the metal is brittle and many screws have become unusable.
It also leaked oil so badly that I had to replace most of the tubes.
SF Model's Alliexpres account has 100% high ratings, but I believe that is a fabrication.
I would not recommend that store.
💯 right on the money. I will never buy from that store again! They are subpar even for my low standards.
Im sorry but to me it looks like its unfinished. No glass and no handles no presure gauge. You should e-mail the seller and find out why?
For sure. It’s not as nice as the other 6015b models. I don’t think it is as near as nice a finish as I’ve seen on other models. It was quite a bit cheaper and I see why. It’s nothing that can’t be fixed. It’s got great mechanicals though. I did find the pressure gauge. They hid it.
If you dont me asking... Where did you buy this machine?
mind
@@jiml9692 AliExpress.
I need this
It’s a beast when it’s not busting hydraulic lines. I think that’s it’s weakness. I think I can fix that!
@@digitrc oh thats bad
@@dannycrover8710 the hoses are hard and brittle it seams. I bust two lines on my video I just released this morning. Check it out. I don’t hide anything on these machines. If it’s a problem I’ll expose it for all to see. It’s not a deal breaker but it is a disappointment. I’m working on a fix for it.
New road Ep-2. Beast or bust. Hg p802 hill climb with 102pound 6015B load. Will it make it or break?
th-cam.com/video/NcfV1bmhvos/w-d-xo.html
@@digitrc cool info. I mean its kinda expected since excavators are such complex machines
@@dannycrover8710 yeah and it’s an odd size. Because it’s so big and the lines are much larger then other rc hydraulic equipment. It moves a lot of oil fast!
Ware are you come from... You speak English from American?
Yes North America.
Where are you from?
@@digitrc Malaysia brother... I have 2 rc excavator scale 1/16 cat 336D2 servo system and scale 1/12 Volvo EC480DL hydraulic fully system
@@hakimikymi9928 that’s cool. These excavators are a lot of fun. I still have fun with all mine even the Huina 1/16 model. All sizes for different jobs just like In real life.
Its price is higher than the real model😆
😂😂😂 yeah I know right?!
much rupees
Very much rupees. 😁👍
Ohh dude are you kidding me its huge i will never buy something like that even How many persone you need Until carry it congrats anyway ...so i have surprise for you But i won't to tell you now Until the time is right 👍
Oh I’m curious now. Can’t wait for the surprise.
This is the largest machine I will add to the fleet for sure. I can manage it by myself for now but I am getting older😁.
@@digitrc l😂l Am getting older 2 ..yeah i swear to god i have surprise But i will tell ya next week Or i will try make video about it But that damm i don't know How ..anyway wait 4 it 😊
@@digitrc But the hobby does not have a specific age enjoy buddy🤗
@@The-Warm-voice1359 I am patiently waiting. 😁🙂🙂
@@digitrc kept you waiting Huh? l😂l
ভাই দাম কত
Pretty expensive. You can get the pricing on AliExpress or toucan hobby .
Nice toy. How does it compare to the 4200xl 1/12 model. Im guessing this beast is more powerful? And 3 times the price of the 4200xl? Lol
You got it about right. It is twice the size four times the weight and way more power than the 4200xl.
@digitrc twice the size of the 4200xl? Then I think they false advertise the 4200xl as an 1/12. Maybe it's more of a 1/14 instead. I checked the price of the 1/12 cat, it's like $5k plus. Love to own one but out of the budget.
@@johnrambo1349 I’ll get them side by side in a video so everyone can see the size difference now that the 6015B is off the work bench.
আমি একটা কিন বো
Congratulations. They are pretty cool 😎. 👍. Have fun digging. 😁
我出售9800液压模型挖机...需要请联系我
What scale?
Qc is non existent
Got that right!