Hi, The material is foam PVC 8 mm. The watter proof connections are from PVC flat garden hose. All is glued with glue for PVC papes. Use small paper models scale 1:10 till find your good design. Then go to real dimensions. Good Luck!
Length-305 cm, beam - 160 cm, freeboard - 50 cm, weight about 35 kgs /the hull/. The hinge is made from a lot of high quality bag ties. The point is how they are knited into the boards - there is no wearing out. Regards Todor
What type of material did you use at the unions of the plywood sheets? The fiberglass, soaked in elastic resin, as Seal Flex? Or something different? Thanks for answering.
First of all, Great Job! I had one question, I think you have had 4 or 5 years of hopefuly heavy usage out on the water, how have the zip ties worked and the pvc hose? Have you had to replace them do to usage? Fred
hello am from brazilian and I love to fish where I live has many dams and lakes I'm also trying to make a wonder what material you used to do and how did the assembly if it can help me thank you very much
Martin Pozzi All the Chinese suppliers seem to only make 4'x8' sheets. If you look at the Portabote, the length of the sheets they are is one continuous piece. I'm assuming that if you make a contract, that they can definitely make you longer sheets when you buy in pretty large quantities. Sadly not something like you or I would even consider buying. Will have to design it in a way so that it'll fold while still allowing it to be longer than 8' in length. Well actually if you go with only the length of the sheet, it'll be shorter because it won't be straight and it's curved so it ends up being shorter overall than 8'.
@MrARDIANATA Length-305 cm, beam - 160 cm, freeboard - 50 cm, weight about 35 kgs /the hull/. The hinge is made from a lot of high quality bag ties. The point is how they are knited into the boards - there is no wearing out. Regards Todor
Вече нямам спомени, но купих доста материали които никога не използвах. След нея имах оригинална 12 футова Порта Боте, след нея понтонна лодка, след нея мичуринка, след това скутер, а сега 12 футова алуминиева лодка.
torromotoro видях че на колата пише тодоров😂 и предположих че си някъде от бургас удобно ли ще е да се чуем ако може да обменим малко опит понеже мисля и аз да правя нещо подобно
Hi,
The material is foam PVC 8 mm. The watter proof connections are from PVC flat garden hose. All is glued with glue for PVC papes. Use small paper models scale 1:10 till find your good design. Then go to real dimensions. Good Luck!
Absolute genius, you are a true craftsman, thanks for a great video!
Very nice design. I would love to see more information on how you made it; materials used and how you glued the seams, etc. Thanks.
Length-305 cm, beam - 160 cm, freeboard - 50 cm, weight about 35 kgs /the hull/.
The hinge is made from a lot of high quality bag ties. The point is how they are knited into the boards - there is no wearing out.
Regards
Todor
What type of material did you use at the unions of the plywood sheets? The fiberglass, soaked in elastic resin, as Seal Flex? Or something different? Thanks for answering.
Porta-Bote needs the competition, seeing as how high they're jacking up their prices! Highway robbery.
First of all, Great Job! I had one question, I think you have had 4 or 5 years of hopefuly heavy usage out on the water, how have the zip ties worked and the pvc hose? Have you had to replace them do to usage?
Fred
hello am from brazilian and I love to fish where I live has many dams and lakes I'm also trying to make a wonder what material you used to do and how did the assembly if it can help me thank you very much
Porta Boat charges way to much ! but good job on this build it was amazing
You said you use PVC foam, flat garden hose, and bag ties? Any links to these items so we can make our own? Wonderful boat!!!
www.ktboard.com/white-pvc-foam-board.htm ,guide.alibaba.com/shop/4-100mm-33-ft-layflat-pvc-water-delivery-hose-discharge-pipe-pump-irrigation-blue-tubing_3234736.html , www.ebay.com/itm/100-PCS-Pack-12-inch-Black-Network-Cable-Cord-Wire-Tie-Strap-60-Lbs-Zip-Nylon-/230847291629
Thank you so much! I hope to make one soon and will definitely give credit to you and your video on this!!!
Just curious, what are the measurements of your boat? The big sheets usually sell 4'x8'. Makes me wonder how Portabote makes 10ft models+.
Martin Pozzi All the Chinese suppliers seem to only make 4'x8' sheets. If you look at the Portabote, the length of the sheets they are is one continuous piece. I'm assuming that if you make a contract, that they can definitely make you longer sheets when you buy in pretty large quantities. Sadly not something like you or I would even consider buying. Will have to design it in a way so that it'll fold while still allowing it to be longer than 8' in length. Well actually if you go with only the length of the sheet, it'll be shorter because it won't be straight and it's curved so it ends up being shorter overall than 8'.
+Martin Pozzi That would make sense. Unfortunately I don't use Whatsapp. Hangouts, but that's about it for text apps haha
Do you have any plans for this boat. I would love to build one.
@MrARDIANATA
Length-305 cm, beam - 160 cm, freeboard - 50 cm, weight about 35 kgs /the hull/.
The hinge is made from a lot of high quality bag ties. The point is how they are knited into the boards - there is no wearing out.
Regards
Todor
How did you make it it's awesome
amazing....i want to make also....
could send me.. a picture and size please.....
thx for you read this...
What did you use to seal the seems thanks nice job
amazing....i want to make also....
could send me.. a picture and size please.....
t
Could you share plans?
you can make them and sell them worldwide for $250 a piece plus shipping if possible. How much time it takes and how much it costs to make? Thx
браво батка! много хубаво!! имаш ли чертежи или сам я мисли?
Impressive.
how much did it weigh
Length-305 cm, beam - 160 cm, freeboard - 50 cm, weight about 35 kgs /the hull/
schéma PLZ
is this material forex pvc foam ?
Страхотна работа адаш,леко плаване!
nice job !
MUY BUENA TU CONSTRUCCION FELICITACIONES.
MIS VIDEOS ESTAN EN OMAR RICARDO BLANCO
plz inform, its material list.
If he was selling this, then he should worry. Otherwise, no worries.
Мужик на фото 2.04 явно первооткрывательматериков
Bravo, toro, bravo, junak! :)
двигатель от мотоблока на мини катере DELTA MINI...
schéma PLZ
whats up with the 1950s asian porn music?
아하
какви пари излезе направата на лодката
Вече нямам спомени, но купих доста материали които никога не използвах. След нея имах оригинална 12 футова Порта Боте, след нея понтонна лодка, след нея мичуринка, след това скутер, а сега 12 футова алуминиева лодка.
torromotoro
видях че на колата пише тодоров😂 и предположих че си някъде от бургас удобно ли ще е да се чуем ако може да обменим малко опит понеже мисля и аз да правя нещо подобно