How to Retrieve and Clear Diagnostic Codes without a Diagnostic Tool on your 14-23 Harley Davidson®!
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- So you've replaced your radio or other audio components and now your check engine light is on? Time to make a trip to a dealer to get it cleared? Not necessarily! In todays video, we're gonna show you how to save a lot of money by clearing some of these simple codes yourself with our a diagnostic tool! Thanks for watching.
Contact info
email Sales@volaudio.com
Phone 1-844-30AUDIO
website www.volunteeraudio.com
Thanks Brother, I live on a Ranch and going to the Harley House is purely a last resort. Battery and starter died. So changed them both. I turn thr ignition on the fuel pump loads up. I press the starter button and the fuel pump loads up again and no click not even a hint of trying to turn over. So God willing and The River don`t rise this will work.
Good luck
Amen!! Love that shirt, and this channel.
Thank you!
@@volunteeraudio - Have a quick question. Have you ever seen this code VINERR?
@@fredmancina4551 I have not
My 2015 road glide started having three short beeps about every 15 seconds. Has DTC code B1338 andB1306.
@@Mta6181 your stock radio has failed
Doc, i put diesel in my motorcycle 2014 electraglide. Now my fuel gauge is inaccurate. How do I fix this problem? There is fresh gas in it now. Still doesnt read properly.
I did disconnect the fuel tank from the bike
This is not my expertise but it sounds like you damaged the fuel sender
Thank you
Thank you
after changing my head unit with the sony and plug and play connector. I get codes of loss of communication to LHC, RHC and stereo screen is blank. It plays but no screen and controls do work. Does it need a "flash"?
No flash needed but you don’t have the correct thumb control module or you left a connector unplugged in the fairing
@@volunteeraudioI’ve spent literally 24hrs over 3 days trying to fix this exact problem. Getting a COM loss error code. There was a 10A fuse in the radio which was clearly marked as needing a 15A, Sony head, and I replaced that. Using a multimeter I found I’m getting the constant 12v power but no accessory power. Any thought on that? Wouldn’t the radio still power up with the constant 12v when bike is running?
@@pjhaebe these codes would come from the module used to interface to the bike, thumb control module from metra axxess or scosche, the same module turns the radio on by creating accessory power
@@volunteeraudio thumb control module? Not sure what that is other than the handle bar controls. I do know the radio is on a Soche mount. Just watched one of your thumb control videos. I have that same gray box labeled ‘LPDH15’. Mine has connections at either end as opposed to on that one side. Is that gray box the fault? It does seem kinda cheaply constructed. I popped it open while trouble shooting, didn’t see any burns/black marks and everything seemed tight.
What is a code L IP mean
I’ve not seen that one
Thanks for all the videos you post. It made the installation of my system run almost flawless.
Could you post a video one day of checking codes via the Soundstream head unit? Also I have tried to add new wallpaper to my head unit and can’t get it to work. Any input would be appreciated!!
Even with the Soundstream installed this same process still works, also any jpeg image on a usb drive can be uploaded just by plugging in the usb thumb drive to the stock usb, go to display in setting menu, go to wallpaper and click the + icon
Great video to explain that codes you can clear without taking your bike to the dealer. I’m sure this video saved me $$$ at the dealer. Thanks..
I’m glad we could help! Thank you for watching!
When I can get enough money together I’m coming to you guys. Thanks for this Vid.
Thank you
Love the Shirt Dude! Oh and the products too.
Thank you!