Hey everyone! Welcome to Wible’s garage. Here’s a step by step video on how to swap a push mower engine, and what all goes into it. More coming to the channel soon!
My brother, YOU are an informative tutorial adept young man!!! My first search for this assistance went to your channel & I’m quite appreciative of what I’ve learned!!! Several 👍🏽s up!!!!
Next time, surprisingly some advice from me, when resistance in old rusted wrenched parts just spray some DW40 or something called GHOO which is an old oil & residue build up goo removal solvent you can get from any hardware store
I used one of those for a while, but I got to a point where I was changing out multiple blades a day, so I thought it would be worth it to get a tool to make it easier.
Thank you for your reply Have you ever successfully transplanted a lawn mower engine to a power washer? If so I would like to see a video on that one Thanks again
If I get equipment in and can make it work I’ll try! The usual issues with making a mower engine work on a washer is A. The engine shutoff, since a mower uses a cable and a pressure washer typically doesn’t, and B. Shaft length. Usually pressure washer engines have shorter shafts (at least from what I’ve seen) and don’t have the pump mount bolt holes. Sometimes you get lucky however!
Excellent video! Is it important to keep the blade with the same engine or better to keep the blade from the deck or any blade as long as same measurements?
Thank you! In the case of these two mowers, they both used the same blade. What you have to watch for is that some mowers use a different blade and/or have a different adapter. If the engine you are putting on has a different adapter (and you don’t feel like changing it) you would need to get a blade to fit it. :)
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
My brother, YOU are an informative tutorial adept young man!!! My first search for this assistance went to your channel & I’m quite appreciative of what I’ve learned!!! Several 👍🏽s up!!!!
Great job buddy!!
I appreciate your calm explanation and mild and patient manner!!!
Next time, surprisingly some advice from me, when resistance in old rusted wrenched parts just spray some DW40 or something called GHOO which is an old oil & residue build up goo removal solvent you can get from any hardware store
Thanks for the good video. I'm going to a motor swap now due to a rusted out deck. I am confident it will be successful.
Brilliantly demonstrated!!!
Thanks! That was cool.
You can straighten your crankshaft with a long pipe and brute strength
Good job! You did everything the way that I would've done it, I dont think it can be much easier than that!
TABkey thanks!
nice. thanx man.
i dont use a blade removal tool i just use a 4x4 peice of wood its cheaper
I used one of those for a while, but I got to a point where I was changing out multiple blades a day, so I thought it would be worth it to get a tool to make it easier.
Thank you for your reply Have you ever successfully transplanted a lawn mower engine to a power washer? If so I would like to see a video on that one Thanks again
If I get equipment in and can make it work I’ll try! The usual issues with making a mower engine work on a washer is A. The engine shutoff, since a mower uses a cable and a pressure washer typically doesn’t, and B. Shaft length. Usually pressure washer engines have shorter shafts (at least from what I’ve seen) and don’t have the pump mount bolt holes. Sometimes you get lucky however!
Excellent video! Is it important to keep the blade with the same engine or better to keep the blade from the deck or any blade as long as same measurements?
Thank you! In the case of these two mowers, they both used the same blade. What you have to watch for is that some mowers use a different blade and/or have a different adapter. If the engine you are putting on has a different adapter (and you don’t feel like changing it) you would need to get a blade to fit it. :)
i had to get a rachet with a breaker bar and a 6 point socket just to get the blade off! bolt aas almost stripped
Sometimes they can be on there pretty tight! Can be a challenge for sure.
Wack your ratchet with pipe wrench. engine mounting bolts with pop loose.
norge696 typically do, but these bolts were loose :)