Great video and explanation of fitting and how it works. Just ordered my stuff for 2 poles from exceed. This is looking like a game changer with no hanging pole hose 😄
Hi Dave great video, love the idea of this and have just fitted but the univalve doesnt turn the water off when the pole is extended on 4 poles, any idea
Been using this system for a couple of months now and it's great the only issue I've found is the protective sleeve has split on the short pole hose exposing the pole... so I'm assuming it'll last a few more week before the hose splits.... this really needs looking at as i wouldnt expect to have to change this on a regular basis... I've emailed the company to see what they come back with!
Sorry Tenzin. I've never used a Reach-it pole so don't know how they are set up. It might be worth emailing Exceed Innovation to ask them. ex-ceedinnovation.co.uk/contact/
With regards to a gardiner backpack, do you know a easier way to connect to tubeless as I've just brought all the tubeless stuff and forgot I have 2 backpacks
Hi Dave great vid as always. What i want to know is i have the ova 8 pole, i have it set up for high reach pressure washing. is there a connection i can use, so when i want to swap the pole from high pressure to soft washing with just a quick connector
Hello Dave just purchased the go tubeless to use with ova 8 the guys have advised to shave down plastic plod . Have you any experience of doing this please
can I ask why don't we just use a john guest fitting to attach the pole hose and the reel hose together?? instead of the reckus fittings,I'm sick of been up on a roof and when I'm pulling the hose up the reckus fitting detaches
Can you change the male rectus or is it moulded in? Just thinking about the wear on it if scrapping across the floor if you don’t extend the first pole section up to protect it.
Hey dave, great video as always....I use my gardner backpack quite often is there a way to use this system with that, or is it limited to the pole and the reel.... if you get what I mean ?
I have an SLX 25ft but also carry 2 extensions - what’s the work around for the end caps if I have tubeless but then need to put an extension on my pole?
Great explanation, cheers. Do you think the new tubeless system is easier to use than the old one - i.e. do you need 2 hands and somewhere to rest the brush end with the new one?
Hi Dave. Recently bought tubeless kit, really like it but the grey sleve protector that covers rectus connection at bottom of pole, I find this slips of and runs down the red hose during jobs. Anyway to stop this happening. I thought a little screw in sleve would be much better if they were to improve on this in the future.
Might be worth dropping Exceed Innovation a message. If people don’t let them know they can’t put it right I would probably wrap a piece of insulation tape around the inside to tighten it up rather then put a screw in as itmay catch the hose and put a hole in it
I didn't mean an actual screw but a screw in sleve to the other end of male fitting. I will contact them. Thanks Dave. All the best with your new project. Top class.
Hi Dave, great video! 👍 I've converted and finding that the ejector sleeve is stopping the pole to extend fully. I have the phantom hybrid 22, pretty similar to your pole I'm sure. It's like the ejector sleeve is too big as it slides up the pole fine, until it gets to pole No2, gets stuck, then ejects itself when I try to pull it back. Am I doing anything obviously wrong Dave? Just thought I'd put it to a pro...... 👌 cheers
It’s not something I’ve had a problem with personally. Might be worth dropping Exceed Innovation a message and asking them. They are bringing out a slightly thinner ejector sleeve soon which might help
Check your pole section. Does it have a plastic insert at the base of that section. If so, it’s that that is stopping the ejector sleeve from going any farther and disconnecting it. I used some narrow pliers to pull the plastic insert out of my 25ft Phantom hi mod.
I’ve had exactly the same problem, and I’m pretty livid about it after spending so much time using the full tubeless kit with a slick connect on connecting it all up to my hose reel and then finding this was happening, I noticed if I put the sleeve in the top of the section 2. It goes down fine, but I did have a go with pliers trying to pull that insert out but was afraid of doing some damage. The other thing I was thinking of was probably take section 2 out, take off the clamp and turn it upside down.
Hello Dave, I noticed you have a pretty good attachment system for a stick with a brush and it's still movable, can you reveal which company it is? greetings
@@squeakycleandave1 that’s what I thought but I wasn’t sure if the cone shaped bit would get caught up in the pole. Obviously that’s the idea of the new butt cap. Thanks Dave :D
I spy the xline flocked brush, I use that on leaded windows and the dual trim mono brush on everything else. using the rinse bar both 35cm. also hot/warm water around 45-50c in tank. heats the ova 8 pole up nice so barely use gloves anymore. not on tubeless may have to go down that road. just use an inline tap fitted to base of pole and a loop of pole hose. had same set up 10 years plus so hard to break the habit.
Sounds very similar to my setup. I used to be the same. I had used the same setup for years then when I started making videos I started trying different things and found small tweaks could make much more money
I’m really struggling to see the point.. basically your pole hose has been cut at the bottom of you pole, and you reel it on with you reel hose. Wouldn’t it be better just to have your reel hose going up the inside of the pole?
The red bolts are made of paper , I feel it’s not very strong when I am cleaning and I only have a 18 ft one , I have a gardeners which is years old and chunks missing etc but still going no problems, I also brought a xline nano that’s even worse breaks every 4 weeks
Great video and explanation of fitting and how it works.
Just ordered my stuff for 2 poles from exceed.
This is looking like a game changer with no hanging pole hose 😄
Fantastic 👍
Cracking vid Mr Squeaky, thanks kindly
Thanks Pete 👍
Love how you put the pole away at the end lol
I was a bit rough 😬
Hi Dave,
Cheers for yet another great video! Just converted mine to the tubeless following the video 👌🏻👌🏻
Cheers
Mike (Gutter Brilliance)
Glad it was useful 👍
Hi Dave great video, love the idea of this and have just fitted but the univalve doesnt turn the water off when the pole is extended on 4 poles, any idea
Check that you don't have it to tight when fully extended
Great setup Dave 👍
Thanks Dave 👍
Nice one. Fits the Phantom pole as well this time ✌️
Great vid mate, when I clicked on this I was hoping it was going to be for the ova8 Dave lol 👍🏻
Should be coming this summer 👍
@@squeakycleandave1 at last 👍🏻
Just placed order for my all my poles
Cheers Dave. Informative as always 👌 👍
Thanks Raymond 👍
Been using this system for a couple of months now and it's great the only issue I've found is the protective sleeve has split on the short pole hose exposing the pole... so I'm assuming it'll last a few more week before the hose splits.... this really needs looking at as i wouldnt expect to have to change this on a regular basis... I've emailed the company to see what they come back with!
Brilliant explanation as always. Thank you 🙏🏼
Thanks Mr B 👍
Hi Dave as always great video, I was wondering any suggestion fittings for Reach-it pole thank you
Sorry Tenzin. I've never used a Reach-it pole so don't know how they are set up. It might be worth emailing Exceed Innovation to ask them.
ex-ceedinnovation.co.uk/contact/
Very nice🙂
With regards to a gardiner backpack, do you know a easier way to connect to tubeless as I've just brought all the tubeless stuff and forgot I have 2 backpacks
Hi Dave great vid as always.
What i want to know is i have the ova 8 pole, i have it set up for high reach pressure washing. is there a connection i can use, so when i want to swap the pole from high pressure to soft washing with just a quick connector
You would probably be best asking someone like Rutland pumps as they know there stuff
Hi Dave great video. Where I can get john guest stoper you used on vid.
Thanks
ex-ceedinnovation.co.uk/shop/go-tubeless/hose-stay-2/
ex-ceedinnovation.co.uk/shop/go-tubeless/hose-stay-2/
Hello Dave just purchased the go tubeless to use with ova 8 the guys have advised to shave down plastic plod . Have you any experience of doing this please
No sorry I haven’t
can I ask why don't we just use a john guest fitting to attach the pole hose and the reel hose together?? instead of the reckus fittings,I'm sick of been up on a roof and when I'm pulling the hose up the reckus fitting detaches
what if you have to extend the pole? what happends then? will the fitting unclip inside the pole and so on?
No. Its designed not to unclip inside the pole.
Good video dave.. But I think I'll take up plumbing instead it's easier
🤣🤣🤣
Can you change the male rectus or is it moulded in? Just thinking about the wear on it if scrapping across the floor if you don’t extend the first pole section up to protect it.
It is all moulded in which would make it more expensive to change but the moulding will protect it a bit so it should last longer
Tip, Soak the hose in a hot bath or a bucket of boiling hot water beforehand 👍
Hey dave, great video as always....I use my gardner backpack quite often is there a way to use this system with that, or is it limited to the pole and the reel.... if you get what I mean ?
Yes mate you can use it with the backpack no problem at all
I have an SLX 25ft but also carry 2 extensions - what’s the work around for the end caps if I have tubeless but then need to put an extension on my pole?
You would need the end caps to fit the extensions then slip off the bottom end cap and put on the extension which has the correct one on it.
Does anyone know if having the uni-valve positioned higher or lower inside the pole makes a difference to its longevity or usability? TIA!
It makes no difference at all
Great explanation, cheers. Do you think the new tubeless system is easier to use than the old one - i.e. do you need 2 hands and somewhere to rest the brush end with the new one?
Yes it’s slightly more difficult to use but it fits on a great range of poles
Hi Dave. Recently bought tubeless kit, really like it but the grey sleve protector that covers rectus connection at bottom of pole, I find this slips of and runs down the red hose during jobs. Anyway to stop this happening. I thought a little screw in sleve would be much better if they were to improve on this in the future.
Might be worth dropping Exceed Innovation a message. If people don’t let them know they can’t put it right
I would probably wrap a piece of insulation tape around the inside to tighten it up rather then put a screw in as itmay catch the hose and put a hole in it
Just told Exceed what the problem is and they said to email them and they will sort you out.
I didn't mean an actual screw but a screw in sleve to the other end of male fitting. I will contact them. Thanks Dave. All the best with your new project. Top class.
Hi Dave, great video! 👍
I've converted and finding that the ejector sleeve is stopping the pole to extend fully. I have the phantom hybrid 22, pretty similar to your pole I'm sure.
It's like the ejector sleeve is too big as it slides up the pole fine, until it gets to pole No2, gets stuck, then ejects itself when I try to pull it back.
Am I doing anything obviously wrong Dave? Just thought I'd put it to a pro...... 👌 cheers
It’s not something I’ve had a problem with personally. Might be worth dropping Exceed Innovation a message and asking them.
They are bringing out a slightly thinner ejector sleeve soon which might help
@@squeakycleandave1 cheers Dave, keep up the good work 👍
Check your pole section. Does it have a plastic insert at the base of that section. If so, it’s that that is stopping the ejector sleeve from going any farther and disconnecting it. I used some narrow pliers to pull the plastic insert out of my 25ft Phantom hi mod.
I’ve had exactly the same problem, and I’m pretty livid about it after spending so much time using the full tubeless kit with a slick connect on connecting it all up to my hose reel and then finding this was happening, I noticed if I put the sleeve in the top of the section 2. It goes down fine, but I did have a go with pliers trying to pull that insert out but was afraid of doing some damage. The other thing I was thinking of was probably take section 2 out, take off the clamp and turn it upside down.
Hello Dave, I noticed you have a pretty good attachment system for a stick with a brush and it's still movable, can you reveal which company it is? greetings
It’s a bit of a mixture. It’s a Euro thread gooseneck bottom half with a Ova8 gooseneck top half and a Ova8 swivel
@@squeakycleandave1 Thank you my friend
Where'd you ge the blue hose? Will it fit 100m on a claber reel?
The blue hose is from www.thecleaningwarehouse.co.uk
I don't know if it would fit on a Claber reel but if others do I don't see why not
I’m sure I’m being dumb but how do you extend the pole with this kit Dave? Thanks for another great video :D
When you extend your pole it just slides up the inside. Not for the Ova8 just yet but will fit most poles
@@squeakycleandave1 that’s what I thought but I wasn’t sure if the cone shaped bit would get caught up in the pole. Obviously that’s the idea of the new butt cap.
Thanks Dave :D
Hi Dave ,
Love your channel , do you know if this kit fits extreme poles and works with the new gardiner goose necks ?
I’m not sure about the Extreme pole. Best to contact Exceed Innovation 01384 934 934
Yes you can get it to fit the new Gardiner gooseneck
th-cam.com/video/MqsyTxJNz9o/w-d-xo.html
I spy the xline flocked brush, I use that on leaded windows and the dual trim mono brush on everything else. using the rinse bar both 35cm. also hot/warm water around 45-50c in tank. heats the ova 8 pole up nice so barely use gloves anymore. not on tubeless may have to go down that road. just use an inline tap fitted to base of pole and a loop of pole hose. had same set up 10 years plus so hard to break the habit.
Sounds very similar to my setup. I used to be the same. I had used the same setup for years then when I started making videos I started trying different things and found small tweaks could make much more money
I got really excited I thought they had finally sorted one for the ova8 😭
It should be ready by the summer
@@squeakycleandave1 fantastic that will be amazing, great video mate
Dave could you send me a link for the kit don’t know which one on the website sorry for being a pain in the ass
You need to order 2 parts. This is the hose reel end
ex-ceedinnovation.co.uk/shop/go-tubeless/go-tubeless-hose-reel-kit/
And this is the pole end
ex-ceedinnovation.co.uk/shop/go-tubeless/go-tubeless-pole-kit/
Dave I have one more request keep the best video’s of its kind coming THANKS
Do you grease up the male rectus?
Evening Dave. Can I go tubeless wiv a oval 8
Not yet but you will be able to soon. He is having a new ejector sleeve made for the Ova8
I think I like the older kit that hole up in the pole.
The good thing about this one is its easier to fit and will fit a greater range of poles. 👍
I’m really struggling to see the point.. basically your pole hose has been cut at the bottom of you pole, and you reel it on with you reel hose. Wouldn’t it be better just to have your reel hose going up the inside of the pole?
Exellent
👍
Why does my go tubeless disconnect itself every time I close the pole? 😢
Without actually seeing how it is set up it's hard to say but If I were you I would give Exceed Innovations a call and ask for advice
Them phantom poles are rubbish
Why do you say that?
The red bolts are made of paper , I feel it’s not very strong when I am cleaning and I only have a 18 ft one , I have a gardeners which is years old and chunks missing etc but still going no problems, I also brought a xline nano that’s even worse breaks every 4 weeks