Just going back through some older videos. Those wheels look sharp. I've done the rit dye on a couple different cars, one thing I've found is when you mix it with hot water, it seems to help the carpet "hold" the color a little better. Still massive transformation from where this truck started.
It takes a F ton of money these days. It's ridiculous! You could buy these square bodies and older OBS's years ago for a couple thousand.... I got my 95' OBS for $2000. Now peope are asking $10,000's. It's crazy.
Hey bud, I know this is an older video and you do things differently now. Huge congrats btw on the new shop. For anyone who doesn’t know you can get great results using this same dye but spraying it with a cheap siphon feed harbor freight Lvlp gun using even a pancake compressor. Hope it helps someone!
That is my favorite truck. U did just what I would do to it. Looks amazing. Wheels are the best looking for old school trucks like that. Great job sir 😊
That spray dye came out great. It really looks good. I tried using carpet dye back in the 1980s on my VW. I ordered it from J. C. Whitney mail order catalog. It was dark brown, to cover existing stains, and it came out in streaks, smears, and splashes. Not a good combination in brown.... 💩
I was hoping you would clean the rust off and paint the bonnet of the truck, and the other tiny bits of rust here and there, and it would have looked totally awesome!
I'm a huge square body fan, even though these aren't that old the margin for profit is well worth picking up more of these. The price for a decent square body has sky rocketed.
I guess the next time do the drip spindles and leave the coil springs alone . Had you not cut a ring and half off, your drop would have been perfect and retained a softer ride….
Looks good but I would have left the stock spindles on it, so you didn't have to cut the control arms, take the wheel pans out etc. I realize I am way behind times on this video....🤣🤣🤣
I'm killing time watching yer older videos, 2 years ago the kids were just little'ns and seen less often 😢 you look a lot younger annnd!😅 Casings are tires & hoops are wheels 😂. Still the older videos were informative, just less lively & family oriented. 🎉 I like what you're doing nowadays 🎃happy 👻 Halloween!
Hey Josh..when you cut the springs on the front. Did they sit well in the control arm spring perch? I have to cut my new springs on my 67 Bel air looks like a gassed. I noticed if I cut them only 2in of spring or so will even touch the lower perch. I can heat and bend it slightly to make it sit like the factory...ps.remind the keyboard warriors this is your channel and vehicles. Keep doing what your doing..
THAT TRUCK LOOKS BAD ASS WITH THOSE NEW WHEELS!!!! I LIKE THAT TYPE OF SILVERADO TRUCK!!! THATS BAC WEN A TRUCK WAS A TRUCK!!!! HATE THE NEW STYLE TRUCKS!!!!!
Those torque thrust rims are my favorite. They literally make any vehicle look sweet.
I completely agree
Just going back through some older videos. Those wheels look sharp. I've done the rit dye on a couple different cars, one thing I've found is when you mix it with hot water, it seems to help the carpet "hold" the color a little better. Still massive transformation from where this truck started.
Yes for sure
Oh man I loved those factory Chevy Rally Wheels! Sure like the cragar style rims too
Thanks
Don't take much to have a fun hotrod square body.
Great video for us backyard guys💪✅️
Thank you
It takes a F ton of money these days. It's ridiculous! You could buy these square bodies and older OBS's years ago for a couple thousand.... I got my 95' OBS for $2000. Now peope are asking $10,000's. It's crazy.
Hey bud, I know this is an older video and you do things differently now. Huge congrats btw on the new shop.
For anyone who doesn’t know you can get great results using this same dye but spraying it with a cheap siphon feed harbor freight Lvlp gun using even a pancake compressor. Hope it helps someone!
You dont like arthritis in your fingers? Dont be a Millennial
I’ve been watching your channel for over a year. Tonight this one popped up 😂
That’s awesome
That is my favorite truck. U did just what I would do to it. Looks amazing. Wheels are the best looking for old school trucks like that. Great job sir 😊
I would have done a black dye on carpet
just saw this one...love this truck...great job
Thank you
Very nice tires & magwheels! I like it!😍😀👍🇵🇭
Wow! What a difference 👏 👌
Awesome 👍
Thanks 🤗
That spray dye came out great. It really looks good. I tried using carpet dye back in the 1980s on my VW. I ordered it from J. C. Whitney mail order catalog. It was dark brown, to cover existing stains, and it came out in streaks, smears, and splashes. Not a good combination in brown.... 💩
Thats a nice looking truck
Thank you
I was hoping you would clean the rust off and paint the bonnet of the truck, and the other tiny bits of rust here and there, and it would have looked totally awesome!
I'm a huge square body fan, even though these aren't that old the margin for profit is well worth picking up more of these. The price for a decent square body has sky rocketed.
That’s true
Not bad nice looking square body
Thank you
Nice truck
First time I heard Josh say the cuss word (tires) 😂
Bad ass truck!
Thank you
Clean truck.
I guess the next time do the drip spindles and leave the coil springs alone . Had you not cut a ring and half off, your drop would have been perfect and retained a softer ride….
Looks good but I would have left the stock spindles on it, so you didn't have to cut the control arms, take the wheel pans out etc. I realize I am way behind times on this video....🤣🤣🤣
same here i'm waithing for those B/O rear 20x10 torq Thrust hope to have it soon can't wait to put it on my C10 :o)
oh and i install one rubber spacer on left for correcting Chevy lean on one side and now is perfect straith :o)
I want some 20x9 steel wheels on my 1964 stepside
Carpet die is a winner if it stays put. I would have done it differently but still looks way better.
Turned out good 👍 what you asking for it
$6800
You should have pulled that carpet out and power washed it before dying it. I have been amazed how clean they come. Soap and water doesn't cost much.
Good idea
@@Sleeperdude a little surprised you didn’t pull out the front seat first.
lindos esses aros
Throw back video pretty cool when did you start using the words casing instead of tires
💯👍🙏
Cut straw off on a angle. on spray bottle then it'll work up side down
I've never heard him say tires before I thought they were casings
I would like to see you and Ralphie find a duce and a half military truck, and work your magic,
Yes me too
Looks sick. Do you have a 5/7 drop??
Thanks, I don’t remember now but I do show it in another video
How did the rid dye work? I have a seat center inserts sun bleach out
What was that thing you put in the front spring, I need to order me a set for my c10?
What drop was this?
I'm killing time watching yer older videos, 2 years ago the kids were just little'ns and seen less often 😢 you look a lot younger annnd!😅 Casings are tires & hoops are wheels 😂. Still the older videos were informative, just less lively & family oriented. 🎉 I like what you're doing nowadays 🎃happy 👻 Halloween!
Thank you.
Hey Josh..when you cut the springs on the front. Did they sit well in the control arm spring perch? I have to cut my new springs on my 67 Bel air looks like a gassed. I noticed if I cut them only 2in of spring or so will even touch the lower perch. I can heat and bend it slightly to make it sit like the factory...ps.remind the keyboard warriors this is your channel and vehicles. Keep doing what your doing..
Truck looks awesome but maybe a new paint job could make it even more awesome
👍
Nah.... Looks perfect as is.
Roxanne
❤😂😂😂
What is the backspace on rear wheels?
It’s been too long I don’t remember
THAT TRUCK LOOKS BAD ASS WITH THOSE NEW WHEELS!!!! I LIKE THAT TYPE OF SILVERADO TRUCK!!! THATS BAC WEN A TRUCK WAS A TRUCK!!!! HATE THE NEW STYLE TRUCKS!!!!!
Thank you I agree
@@Sleeperdude BEEN WATCHING UR VIDEOS THIS PAST WEEKEND!!!!
Are this wheels allumium?
Yes
Do you still have the old wheels off that truck?
No I sold them
@@Sleeperdude Damn, thanks for replying tho.
is this mag gray ?
Yes
Still have those factory wheels?
No I sold them sorry
@@Sleeperdude dang. I really just need a center cap for our suburban. Enjoy the videos. We have been binge watching them.
Got them new wheels on the sonic side waiting on the rear wheels.
That’s right
is it still for sale ?
No it's sold
Tires?!?!? The language, lol
how much for truck
It’s allready sold sorry
What’s up with you saying tires so much lol😂
buy a carpet man
All the cuss words in this video..
Another good truck butchered up.
Yep
You cant Butcher something that was already dead… its better then it was and was and low budget, win win , but sure i get it you’re a “purist”