Andersen 3000 Storm Door Installation - Save $$$ and do it yourself
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- In this video, I show you how easy it is to install a brand new Andersen 3000 series storm door. Do it yourself and save a ton of money! Included in this video are step by step instructions and what problems you might run into while performing the installation.
Thanks for watching and don't forget to like and subscribe for more DIY videos!
#diy #home #doors
I bought my door a month ago and search for videos to install after cancelling the pro. This by far is the most informative I’ve found
Thanks for watching and thanks for the kind words. Glad I could help.
Thanks for this video! The instructions weren’t bad, but having a visual walkthrough like yours was very helpful.
Welcome. Thanks for watching!
Less than 1k views for the most informative video.ive found for this damn door
It'll get there some day lol I hope anyways. Still building out my presence on here. Was at 1k subscribers May 2023 so it's definitely growing
TRULY this is THE BEST VIDEO! Thank you for this awesomely explained video!!! Saved me $150 installation and I’m a girl 😂
Welcome! Glad it helped out
My hero lol. Wife came home with this door and I was like ummmm… first video I clicked on was yours. Truly a great vid!
lol thanks for watching!
thank you for walking us through step-by-step...
Very welcome!
Thanks for the detailed explanation and taking the time to film the close ups. You are very knowledgeable. Thanks for sharing!
Very welcome. Thanks for watching !
The most helpful video! Made our door installation a breeze.
Great news! Thanks for watching!
Absolutely great instructions! Made installation a breeze. Thank you.
Welcome! Thanks for watching!
Thank you,well done.
You’re very welcome. Thanks for watching.
How flexible are the side frame panels? I just had mine installed and the inside part of the door handle is rubbing just a little against the frame and it's scratching the frame up. It does shut if you pull the handle but it doesn't naturally close. Great video!
I don’t think they’re very flexible. The plastic spacers help the keep everything gapped properly when installing
Does nobody notice that he didn’t put the screen in? How do you put the screen in? Nobody tells you that.
why did you have a level in the picture... did you use it to check ??? do you need to shim if not level opening???
I checked the door frame. As long as the interior of the door frame is plumb then the door will be perfectly aligned when you push the hinge side against the door frame.
Thanks 😅
Welcome!
okay...I think I can do it!!!
You definitely can. Any questions don’t hesitate to ask
Very helpful to watch. What about the plates for the deadbolt and latch?
For the storm door or entry door?
@@theguyofalltrades the storm door you demo hanging.
Should be in the video. I show how to install the handle set. Oh wait are you talking about the receiving side for the locks? If so it’s built into the door frame
Yes the receiving side on the door frame. It's real nice if the old matches the new but often their off and you have to find the location and either start from scratch and patch the old cutouts or worse it’s just off a little and you have to fudge something to get the strike plate to hold securely. I find that to often be tricky and was hoping for tips and ideas.
It’s all built into the right side frame rail. Don’t need to mount any catches at all. I had to remove the catch on the inner door frame from the old storm door
I just subscribed
Thanks!
Did you have any trouble getting the short screws in the pre made holes during the closing part. Ours seem very large for the pre made holes. Do we just need to force them in? Thanks!
For the outer trim part?
How to replace corners on veal sidin
Like j channel?
Can't get the door to open after unsnapping the orange clips. Can you please elaborate what did you do on the interior side at 4:00. Thank you
Just go on the inside, and you can actually lift up where the clip is getting stuck on the frame
Thank you for the quick reply.
I had to unscrew the door on the handle side and then pull on it for deadbolt/latch to retract the jammed door. Anderson has a how to on their site. Do Google for "How to Unlock Storm Door When Deadbolt Does Not Retract"
@@jigneshrathod6614 We just had the same problem, thank you.
@axiotraining360 the locking latch is very flimsy and has a rather high clearance....feels cheap.
Okay I’ll definitely save me 300 for that installation from Home Depot
It’s super easy to install compared to some other brands.
Afraid i don't have the right tools to install this storm door. A handyman quotes me $85 to install it.
That’s pretty reasonable honestly. I would expect a bit more
That's a great price, most handyman start at $150-$300.