Come to indonesia ill show you ppl here install acp its far from standart instalation..because ppl here want low price but good quality :( .. they pay us to low..
@@arieloflameusa The panels I am working with right now came from Atlanta but i see Chinese writing on the peal, so i think they are from China. Actually not bad . In Canada i was using Chinese material as well but the plastic between aluminum was way harder so i had to change the router bit more often.
As a union sheet metal worker on the east coast. This guys got it down pretty well. There are some things I would have changed with the panel. Even though it is a closed system. But the caulking video! Aye!!! My man’s is good with it
This panel system is alot different from I I stall here. With ours we get them made in shop and they have a bunch of supports everywhere and then the clip system is built in where you just have to slide the clips into little channels instead of screwing right to the panel otself
That's pretty good. The only thing I'd add would be a watertable at the base with the bottom trim retuning all the way to the back so the color of the trim is exposed. That way the backer-rod and caulking wont be exposed.
Me and my dad put up acm panels for a living its hard work especially when u have to fab the whole job to! He has been doing it for 35 years I been doing it 15 years! But yells work looks good! Wear are yellow from we work all over the southeast Georgia, Florida, South Carolina, North Carolina, Alabama, and Virginia! But it's good to see that someone else knows what their doing because it is easy to screw it up if you don't take the time to lay it out! We have ad to fix a lot of people's work to because they didn't know what they were doing!
Halo we want to intake Acm panels in New York will help material already on delivered starting project on June 15 2024 about 2500 sqft one story building
I would like to thank you for this video. I purchased the material and installed it myself with the help of some friends. This video gave a lot of helpful advice. thank you
amazing video and very infromative. I learned someting new!!!
3:35. Why do you futz around with the vicegrips? Would they not be set the same from the previous bend?
I really enjoy this video
Great but can u send a link where we can get the bit and router
Thank you for your video. Where are you located? I read below that you did some work in Canada. Would you be interested in doing another project?
Muy Profesional
Very helpful
Thank you for a great video and explanation. I've always wondered the best way to install composite panels and you have nailed it with your video.
Come to indonesia ill show you ppl here install acp its far from standart instalation..because ppl here want low price but good quality :( .. they pay us to low..
Thanks man🙏🙏
What bit would you recommend ? casually read recently about how some inexpensive bits are as good as expensive. Any insight would be appreciated.
Start watching this video from 8:45 This kind of bits i am using. they are not expensive but very good.
😊👍
Is that a homemade guide?
I would call it “low budget “
@@LeftoverCA the guide you use for the router. Where do you buy it?
@@williamlopez2363 oh! I just attached a piece of u shape metal to the router base. Had to do a few adjustments to make it cut exactly 1” grooves
@@LeftoverCA thanks! Great job
What size are this panels ? 6mm?
Ariel Biernacki No this one is 4 mm
@@LeftoverCA what os the average price for sheet? There making so complicated to find this product in usa.
@@arieloflameusa Depending on the color- 250$ to $380 (wood grain) per 5`x16` sheet
@@LeftoverCA what do you think about chinese acp? Any big difference?
@@arieloflameusa The panels I am working with right now came from Atlanta but i see Chinese writing on the peal, so i think they are from China. Actually not bad . In Canada i was using Chinese material as well but the plastic between aluminum was way harder so i had to change the router bit more often.
what type of screws did you used for the framing and for the panel?
As a union sheet metal worker on the east coast. This guys got it down pretty well. There are some things I would have changed with the panel. Even though it is a closed system. But the caulking video! Aye!!! My man’s is good with it
I've been considering this stuff for artwork and needed some dudes that know their stuff.
Thanks, boys!
This panel system is alot different from I I stall here. With ours we get them made in shop and they have a bunch of supports everywhere and then the clip system is built in where you just have to slide the clips into little channels instead of screwing right to the panel otself
your system is good. we don't have a shop...
Soy mexicano este trabajo esmimero mole
Jaim trop trop ca mes jai pas eu la chance d aprendre ca
Thank you!!!
Great job and very informative!!!
Thank you so much sir for uploading and sharing your knowledge!!!👍😊👍
I work excellently on that material here in Colombia, I even make it in 3D if they need workers I'll go there
Do you ever make these panels with insulation in them, for additional R-value?
Yes I do! Lately we did almost every job with insulation.
That's pretty good. The only thing I'd add would be a watertable at the base with the bottom trim retuning all the way to the back so the color of the trim is exposed. That way the backer-rod and caulking wont be exposed.
SUPERB !! great video with very clear instructions. thank you. you are a very good teacher
I will love to work with you guys honestly.
Very helpful. Thank you. I have some questions. How can a get you.
Great job nice and informative you solve my problem thanks
Very nice lines. Very impressed.
I am Indian ACP work mistri your country monthly salary
What thickness of angle stock are you using??
4 mm
Any idea what the thickness is?
its 5mm
VERY INFORMATIVE.
VERY CLEAR.
THANK YOU.
Dude thanks for sharing
poor technique. slow worksmanship
what type of router bit you are using to grove and cut aluminium composite panel? can u send me model? or just use wood router bit and its work?
pls scroll to minute 10 in that video. I am showing the bit and the brand we are using. Its available online
Disculpa amigo ,pero no se ve un carajo.
I m Pakistani ACP master 15 years experience
Thanks sharing
these panels can be installed on durock walls?
those are big panels have to reinforce the middle for bending
Kahan per kam chalta hai Hamen bula lo
You have work visa
You have work visa ✌️
Mistri ki salary kya hai ACP work
where can i buy acm from??
Please what is the of the machine
Me and my dad put up acm panels for a living its hard work especially when u have to fab the whole job to! He has been doing it for 35 years I been doing it 15 years! But yells work looks good! Wear are yellow from we work all over the southeast Georgia, Florida, South Carolina, North Carolina, Alabama, and Virginia! But it's good to see that someone else knows what their doing because it is easy to screw it up if you don't take the time to lay it out! We have ad to fix a lot of people's work to because they didn't know what they were doing!
How can I contact you ?
Anyone in Atlanta Georgia can install ACM panels?
let's start with rashcar@gmail.com
RU a Robot? Sorry become a Robo?
Halo we want to intake Acm panels in New York will help material already on delivered starting project on June 15 2024 about 2500 sqft one story building
Good morning. Great job. What state are you located.
i appreciate it. Illinois
Cc I like this job
Machine name please
How thick is your ACP ?
4mm
do u have 12mm thickness?
nice i like your video
What is the name of the tool/machine?
Its called a Router.
Thank you!
Uk??????
yes
I would like to thank you for this video. I purchased the material and installed it myself with the help of some friends. This video gave a lot of helpful advice. thank you