Hey Weerapat thanks for bringing every release to show us! This is a wurkkos WK15 in a new shell, a 21700 XHP 50.2 FET light. A 21700 XHP 50.3 5000k boost driver would be a instant buy for me ❤
I wished I had watched this video of the SC29, Weerapat. I ordered the Sofirn SC28 instead as it was on offer and was priced lower than the SC29. It is interesting that both flashlights are quite similar to one another (XHP50B, TIR optics, 21700 format battery) but the SC29 is made to be slightly brighter. My SC28 is manufactured in 2024 and comes with a Cree XHP50B. Although the CCT is rated at 6500K, the domed XHP50B has a thick layer of yellow phosphor which can be seen through the TIR lens. The tail switch has a mushy feel to it and it's tricky to select the desired output level by half-clicking. I think the SC29 is much better although it only has a side switch. I don't quite like the strange UI used by the SC28, it is almost like Aplos originally made it. The SC28 does not have an electronic tail switch, but a mechanical forward click type. To change the SC28 to the Tactical group mode, I would have to unscrew the flashlight head and flick the micro switch on the PCB to the "Tactical" position. Its UI is very much like the Wurkkos TD02 and cycles between Eco->Low->Med->High->Turbo->Eco in the Normal group. Already subscribed, thanks! 😀
Hello sir. Such a long good writing! I can agree more with you sir. In my opinion, I love buck driver sir. Thanks for watching and your support sir 😊🙏.
Hi, do you know if this XHP50b or XHP50 2 6500k can be replaced with LMP led? I want to make this warmer but xhp50.2 is only 6500k 3V the 3000k and 4000k are 6v and 12v i think so that won't work
Hello sir. Yes sir. LMP led is 3v 5050. I think it's very good and powerful. I put two LMP 3000k version in my D25 headlamp. Thanks for watching and your support sir 😊🙏.
Hello sir. In my opinion, in terms of sustained output and availability of spare parts, Convoy is better sir. But for waterproof, sofirn might be better. Sofirn's design seems better. For beam distance, convoy is better and you can select led tint as well. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hello sir. I think sc29 uses 3v led sir the led board is bigger than 16 mm. Probably 20 mm. The head is glued but it's possible to remove it. Thanks for watching and your support sir 😊. 🙏.
@@weerapatkiatdumrong Thanks! I just checked they don't seem to have 3v just 6v and 12v. All the sellers I've checked so far even with the 6500k. Maybe I'll wait until I receive the flashlight open it up and check the one inside to see what it says.
@@weerapatkiatdumrong I think this is the same problem I had with the FC11. They only make xhp50.2 3v in 6500k. Anything warmer is 6v and 12v. Or can you get a XHP50.2 3v 3000k?
Hello sir. How about sp35, sp33 v3. Wurkkos also have good flashlights like ts22, ts26. Thanks for watching and your support sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong Thanks for the answer sir! But in terms of Brightness, efficiency and driver, which one is better? (I already have flashlights for self defense)! Thanks sir ^^
Hello sir. Please check this. Flashlights often step down from turbo mode for several important reasons: 1. Heat Management Turbo mode generates intense brightness, which produces significant heat. Sustaining this level can cause the flashlight to overheat, potentially damaging the LED, internal circuitry, or even the flashlight's housing. Stepping down helps prevent overheating and ensures longevity. 2. Battery Protection Turbo mode drains the battery rapidly. A step-down ensures the battery is not excessively stressed, which could reduce its lifespan or even lead to dangerous conditions like overheating or leakage. 3. Efficiency and Runtime Sustaining turbo mode consumes a lot of power, drastically reducing runtime. Stepping down balances brightness with efficiency, extending the usable time of the flashlight. 4. Component Safety LEDs and drivers in flashlights have thermal and current limits. Running at turbo levels for too long risks exceeding these limits, leading to permanent damage or failure. 5. User Safety Excessive heat from prolonged turbo mode use can make the flashlight uncomfortable or unsafe to handle. Stepping down helps keep the flashlight cooler and safer for users. Manufacturers often include these step-down mechanisms as part of a flashlight's design to ensure reliability, durability, and safety for both the flashlight and its user. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hello sir. I didn't make runtime graph sir. It takes a lot of time to do that but very little earnings from TH-cam. So now I do what I can do best. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hello sir. In my opinion, I like ts22 more sir. I like its ui more than sc29. However, sc29 is not bad. Its beam is narrower which is not my type. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Your SC28 seems to be a dud. How can it be so much less brighter than the SC29 with just 200 lumens difference on Turbo and also the SC28 has a spec of over 200m throw compared to the 142m of the SC29 and yet it looks less in your comparison. Something seems very wrong here. Also don't they both use the same emitter so why such a difference in your samples? I don't find my SC28 green at all especially on Turbo when it's neutral/cool white I would say. I remember you showing your SC28 in a previous comparison and it was surprisingly bad then also. I really do think you have been comparing a dud as your SC28 looks like no more than medium or high level. Maybe the emitter is burnt out some?
Hello sir. I am the first who got sc28 sample to review before it was released to the market. I noticed that my sample had a bit green tint and for the brightness, sc29 is brighter than my sc28 sir. Same battery and fully charged. There might be something wrong with my sc28. The led might not work properly. Anyway, thanks for watching and your support sir. Please subscribe 😊🙏.
@@weerapatkiatdumrong if your SC28 does not have a longer throw according to the specs and it definitely does not from what you are showing then yes, your SC28 is definitely not working properly. The SC28 should have shown a clearly better throw Again my own SC28 is thankfully good for 200m throw no problem. What I wonder is why this SC29 is only spec'd to 142m as that seems very low for a 3000 lumen light???
Hello sir. Mine is a sample and definitely the first batch. It probably had defect. I agree with you about the throw distance sir. I think it can go further than that. Thanks for watching and your support sir 😊🙏.
Hey Weerapat thanks for bringing every release to show us!
This is a wurkkos WK15 in a new shell, a 21700 XHP 50.2 FET light.
A 21700 XHP 50.3 5000k boost driver would be a instant buy for me ❤
Hello sir. I agree with you sir. I think it's like WK15. But in different lens and ui. Thanks for watching and your support sir 😊🙏.
That's just the modes of the WK15 are selected more correctly, it seems to me. + 1 more mode.
Im thinking of sc28, sc29 and TD04...now i know what i want..thanks for your video
Thanks for watching and your support sir 😊. Please subscribe 🙏.
What did you end up going with
I wished I had watched this video of the SC29, Weerapat. I ordered the Sofirn SC28 instead as it was on offer and was priced lower than the SC29. It is interesting that both flashlights are quite similar to one another (XHP50B, TIR optics, 21700 format battery) but the SC29 is made to be slightly brighter.
My SC28 is manufactured in 2024 and comes with a Cree XHP50B. Although the CCT is rated at 6500K, the domed XHP50B has a thick layer of yellow phosphor which can be seen through the TIR lens. The tail switch has a mushy feel to it and it's tricky to select the desired output level by half-clicking. I think the SC29 is much better although it only has a side switch.
I don't quite like the strange UI used by the SC28, it is almost like Aplos originally made it. The SC28 does not have an electronic tail switch, but a mechanical forward click type. To change the SC28 to the Tactical group mode, I would have to unscrew the flashlight head and flick the micro switch on the PCB to the "Tactical" position. Its UI is very much like the Wurkkos TD02 and cycles between Eco->Low->Med->High->Turbo->Eco in the Normal group.
Already subscribed, thanks! 😀
Hello sir. Such a long good writing! I can agree more with you sir. In my opinion, I love buck driver sir. Thanks for watching and your support sir 😊🙏.
You are the best !!! good flashlight !!
Hello sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Gostei muito do vídeo 📹 parabéns ficou perfeito, voce é uma inspiração 🇧🇷✌️
Thanks for watching and your support sir. 😊🙏
Hello, when will the new model be reviewed Armytek Prime Por Max
Hello sir. I will try my best to get it sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hi, do you know if this XHP50b or XHP50 2 6500k can be replaced with LMP led? I want to make this warmer but xhp50.2 is only 6500k 3V the 3000k and 4000k are 6v and 12v i think so that won't work
Hello sir. Yes sir. LMP led is 3v 5050. I think it's very good and powerful. I put two LMP 3000k version in my D25 headlamp. Thanks for watching and your support sir 😊🙏.
@@weerapatkiatdumrong Nice, thanks for the info!!
Do you think its possible to modify to neutral? Or is it too hard to get to the emitter?
Hello sir. I think it's easy to replace the emitter sir. Thanks for watching and your support sir 😊🙏.
@@weerapatkiatdumrong Nice, I might try that. Or do you think they will offer it in neutral eventually?
Is a Convoy S21E XHP50.3 Hi better than SC29?
Hello sir. In my opinion, in terms of sustained output and availability of spare parts, Convoy is better sir. But for waterproof, sofirn might be better. Sofirn's design seems better. For beam distance, convoy is better and you can select led tint as well. Thanks for watching and your support sir 😊. Please subscribe 🙏.
I have convoy s21e xhp50.3 its throw is really good compare to other host with OP reflectors
Hello sir. Great host. I am sure it can reach more than 250 meters. Thanks for watching and your support sir 😊🙏.
I just figured out XHP50b and 50.2 are the same. Do you know what board i should get 16mm? 6v or 12v? The head of the light unscrews?
Hello sir. I think sc29 uses 3v led sir the led board is bigger than 16 mm. Probably 20 mm. The head is glued but it's possible to remove it. Thanks for watching and your support sir 😊. 🙏.
@@weerapatkiatdumrong Thanks! I just checked they don't seem to have 3v just 6v and 12v. All the sellers I've checked so far even with the 6500k. Maybe I'll wait until I receive the flashlight open it up and check the one inside to see what it says.
@@weerapatkiatdumrong I think this is the same problem I had with the FC11. They only make xhp50.2 3v in 6500k. Anything warmer is 6v and 12v. Or can you get a XHP50.2 3v 3000k?
Can you suggest me which is the best edc sofirn flashlight with good spot beam and wide and has side switch
Hello sir. How about sp35, sp33 v3. Wurkkos also have good flashlights like ts22, ts26. Thanks for watching and your support sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong Thank you
Hello, sir! Great video! Which one is better? SP35T or SC29 (Brightness, Efficiency, Driver)? Thanks ^^
Hello sir. In terms of self defense, sp35t sir. Ui is good too. Thanks for watching and your support sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong Thanks for the answer sir! But in terms of Brightness, efficiency and driver, which one is better? (I already have flashlights for self defense)! Thanks sir ^^
Is it alright to use Molicel P45B? In this sc29 with 45A
Hello sir. Yes sir. Thank you for watching and your support sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong Thanks for the information. May God bless you ☺️👍🏻
Why the turbo step down??
Hello sir. Please check this.
Flashlights often step down from turbo mode for several important reasons:
1. Heat Management
Turbo mode generates intense brightness, which produces significant heat. Sustaining this level can cause the flashlight to overheat, potentially damaging the LED, internal circuitry, or even the flashlight's housing. Stepping down helps prevent overheating and ensures longevity.
2. Battery Protection
Turbo mode drains the battery rapidly. A step-down ensures the battery is not excessively stressed, which could reduce its lifespan or even lead to dangerous conditions like overheating or leakage.
3. Efficiency and Runtime
Sustaining turbo mode consumes a lot of power, drastically reducing runtime. Stepping down balances brightness with efficiency, extending the usable time of the flashlight.
4. Component Safety
LEDs and drivers in flashlights have thermal and current limits. Running at turbo levels for too long risks exceeding these limits, leading to permanent damage or failure.
5. User Safety
Excessive heat from prolonged turbo mode use can make the flashlight uncomfortable or unsafe to handle. Stepping down helps keep the flashlight cooler and safer for users.
Manufacturers often include these step-down mechanisms as part of a flashlight's design to ensure reliability, durability, and safety for both the flashlight and its user.
Thanks for watching and your support sir 😊. Please subscribe 🙏.
is there aux light like ts22 and sp33s?
Hello sir. No sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Runtime graphs?
Hello sir. I didn't make runtime graph sir. It takes a lot of time to do that but very little earnings from TH-cam. So now I do what I can do best. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Lebih terang mana sama wurkkos ts22 ?
Hello sir. In my opinion, I like ts22 more sir. I like its ui more than sc29. However, sc29 is not bad. Its beam is narrower which is not my type. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hi.this new release?
Hello sir. Yes sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Your SC28 seems to be a dud. How can it be so much less brighter than the SC29 with just 200 lumens difference on Turbo and also the SC28 has a spec of over 200m throw compared to the 142m of the SC29 and yet it looks less in your comparison. Something seems very wrong here. Also don't they both use the same emitter so why such a difference in your samples? I don't find my SC28 green at all especially on Turbo when it's neutral/cool white I would say. I remember you showing your SC28 in a previous comparison and it was surprisingly bad then also. I really do think you have been comparing a dud as your SC28 looks like no more than medium or high level. Maybe the emitter is burnt out some?
Hello sir. I am the first who got sc28 sample to review before it was released to the market. I noticed that my sample had a bit green tint and for the brightness, sc29 is brighter than my sc28 sir. Same battery and fully charged. There might be something wrong with my sc28. The led might not work properly. Anyway, thanks for watching and your support sir. Please subscribe 😊🙏.
@@weerapatkiatdumrong if your SC28 does not have a longer throw according to the specs and it definitely does not from what you are showing then yes, your SC28 is definitely not working properly. The SC28 should have shown a clearly better throw Again my own SC28 is thankfully good for 200m throw no problem. What I wonder is why this SC29 is only spec'd to 142m as that seems very low for a 3000 lumen light???
Hello sir. Mine is a sample and definitely the first batch. It probably had defect. I agree with you about the throw distance sir. I think it can go further than that. Thanks for watching and your support sir 😊🙏.
test perfect
Thanks for watching and your support sir 😊. Please subscribe 🙏.