NOS is a gateway,...the first step to harder drugs. Next it'll be popup pistons, hotter rods, higher compression, then higher octane, a larger camshaft, and the first thing you know, you're hooked on speed.
And cylinder walls as mirrors and huge carter pressure and then you can hone the cylinder walls 😂😂 drove nos too damn much with a 7.5kg bottle and heater
@@DaciaSandero_1.5DCithan later Engine say so: "Boom Biddy Bye Bye, 👋 i put my Parts in the Air and don't ask why, Boom Biddy Bye Bye, Rock-a-Bye, blown off Boom Biddy Bye Bye." "I throw ma set in the air!, come on, i wave it around like i just don't care, throw ma set in tha air, throw it up!, and wave it around like i just don't care!, throw ma set in the air, throw my hood up!, wave it around like i just don't care, and got come on!, throw ma set in the air, I give it up!, and wave it around like i just don't care.." So it was the hittin' Engine telling Cypress Hill these Lyrics.
Oooooohhhh That's why they put it in in front of the turbo. Was wondering about that, I've always seen it closer to the intake after the throttle body. But I was always building N/A Honda's that didn't really like N0S very much lol.
@@STTP69 It doesn't have any use. It's just something that happens naturally. The same thing happens when you remove the valve from a inflated tire: due to the air flowing out of the tire so fast through that little orifice, it makes that the air gets cooler as it gets out the tire, which is why the tire valve starts freezing after some time when the air escape from the tire. My guess here is that the nozzle is right in the way of the flow of air the turbo is sucking in, and the air is sucked in so fast that the same phenomenon happens due to the nozzle being a very small surface similar to a tire valve.
@@dosh8276the liquid nitrous experiences a drop in pressure and evaporates. This causes the nitrous to absorb lots of heat, thus cooling the nozzle. This is called vapor compression.
@@adventuringboysbeatz2945 Suppose you haven't watch the movie called Turbo to understand my point of RGB so you say you RGB everything including your toilet bowl so you can't miss the target while taking a dump 😂😂😂😂
@@ReroyChangthey don’t show it much but cleetus McFarland uses CO2 or something like it to keep cooler and spooled faster on mullet and a couple other cars
@@Rick_James I had a buddy that had a 03 Jetta Wolfsburg, and we installed a CO2 sprayer on his intercooler. The gas comes out sub-zero, and makes for a very good cooling booster for the charge air.
@@Rick_James they use co2 for boost control not to spool the turbo, he usually does not need it. he tried the nitrous trick like in this video 1 time at a high altide track cause it would not get on to the 2step fast enough.
@@jasonkay9345you’re better off to just spray water on the intercooler. Water can carry away much more heat. Simpler and cheaper. You can literally unplug your washer line and have it spray the cooler
@@andrewgarcia4631 It can throw off your AF ratio if the there’re any thermal instability in the lines or bottle. Which can lead to catastrophic failures if it’s thrown too lean.
@@Ganja-w5d yeah your right, I don't need a car, I have a jeep. And it don't need a turbo. They don't work correctly on a real vehicles like jeeps. But if I had a skateboard, ??? Boy. I tell ya. I remember this video. Can't figure it out so let's make the turbo larger. 🤪☝️👍👌... no really, it might work. Let's spend worthless money. 🤔👍 This is the best comedy scene yet. 🤪👈. How do you get over the larger turbo lag? You do know there's a turbo lag right? And the larger the turbo, the more lag. That just means it can't keep up. I've got a better idea. . One stick of tnt and its to the moon. Sound good. ? I like it. Let me know if I can be of help. 😁
I’ve never seen nos injection be used before the turbo. Seems like a pretty uncommon setup that could cause pooling in the intercooler 😂 Depending on if it’s a wet or dry nos system, usually the injector is placed at the end of the intake system, just before the inlet manifold or multiple injectors for each cylinder port.
Its more for show, like a hood ornament thats somewhat functional. If the turbo was positioned correctly and the nos was fitted way after the intercooler it would actually make use of its potential. Its like spraying an inhaler in front of your face and trying to breath it in.
@@eryczakpl2337 It won't make it spool any faster as it's the exhaust gasses passing through the turbine that spools up the compressor wheel. The compressor wheel would probably spool slower actually compared to normal nitrous injection. Since there would be less nitrous molecules making it into the cylinders, so less cylinder pressure and exhaust pressure for the turbine. I think the only reason to do nos like this is for it to look cool lol.
The turbo will suck it in fine from where it is, and once the turbo pulls it in it’s gotta go through a foot of 4” pipe then past the throttle body and into the intake where it’ll be distributed plenty evenly. Honestly he could have the nozzle protruding out 1/2” in front of the turbine housing and it would still draw every bit of that N2O in under boost.
He's not entirely wrong though. A major manufacturer (saab?) did pre turbo alcohol injection testing and found the vapor to be incredibly damaging to the blades. However, another company did their own testing (devils own injection?) and found the damage could be mitigated by spraying at the center of the assembly. This is my vague recollection at least. I believe it was postulated that the inside of the blade has a lower velocity than the outer edge, making it less susceptible to damage.
Isn't it one of thoose that have a lever to apply tension when closed? Maybe i explained it poorly so i'm sorry if you don't know what i mean. For reference tool boxes have a similar clamp style to keep them shut
When I put a 103 Garrett on my first 6.0. The only way to spoil it was a lil 75 shot off the line. It works better up by the throttle body. Or you can do it like that and just spray a lil more. Let off the brake and grab the spray at the same time. Priceless
Honest question here... now wouldnt the spray hitting the impeller be bad? Why wouldnt you put it on the compressed side after the impeller or does it really not matter? Both would have the cooling effect
NOS is a gateway,...the first step to harder drugs.
Next it'll be popup pistons, hotter rods, higher compression, then higher octane, a larger camshaft, and the first thing you know, you're hooked on speed.
This is a public service announcement to protect people both against whip-its & speeding
both very expensive, very potentially dangerous addictions
And cylinder walls as mirrors and huge carter pressure and then you can hone the cylinder walls 😂😂 drove nos too damn much with a 7.5kg bottle and heater
Wow. Yes!
LoL you guy's are funny I guess we all suffer from serious speed
E 😮r😅🎉😅😅🎉😂
That turbo just snorted some laughing gas. Its a happy turbo now :>
😂🤣😂
roflllllllllll
ROFLMAO!!!!!
Turbo addicted to sniffing nitrous and no wonder it high as a jet turbine 😂😂😂
Hahhaaaaaaaa
Turbo just snorted it and said "TIGHT, TIGHT,TIGHT"
Proceeds to bash every cars face in
Booyah
😂😂😂
It’s not a turbo lmao
😂😂😂
Nah, last time I shot laughing gas into my engine, it started making knock knock jokes...
Who's there?
@@pat93ziger engine bearing
@@DaciaSandero_1.5DCiengine bearing who?
"Engine bearing too much NOS"
@@exsopher long block: engine bearing, kaboom?
engine bearing: yes long block, kaboom
@@DaciaSandero_1.5DCithan later Engine say so:
"Boom Biddy Bye Bye, 👋 i put my Parts in the Air and don't ask why, Boom Biddy Bye Bye, Rock-a-Bye, blown off Boom Biddy Bye Bye."
"I throw ma set in the air!, come on, i wave it around like i just don't care, throw ma set in tha air, throw it up!, and wave it around like i just don't care!, throw ma set in the air, throw my hood up!, wave it around like i just don't care, and got come on!, throw ma set in the air, I give it up!, and wave it around like i just don't care.."
So it was the hittin' Engine telling Cypress Hill these Lyrics.
It‘s called laughing gas because that power never fails to make you smile
Amen to that…
Real talk 💯
Grin when ya' win! :o)
Wouldn’t it be called “smiling gas” then?
Yeah... No, it's because it really makes you laugh lol
Not just cool... it cools too.
Someone knows nothing💀
Oooooohhhh That's why they put it in in front of the turbo. Was wondering about that, I've always seen it closer to the intake after the throttle body.
But I was always building N/A Honda's that didn't really like N0S very much lol.
@@jonbar140mostly for spooling up that large turbo
@@miltonulm5102 I'm not sure I understand how that's going to help at spool up? That's on the other end.
@@Steppa101-y3uyou are the one who knows nothing, nos very much cools the air down by a hell of a lot, u can see the injector freezing over
I can't stand when people say "Nitrous makes everything better" because I have to agree with them, and I don't like agreeing with people.
😂🤣😂… I agree
agree to agree
Here ye here ye I accede‼️
😂
Sounds like small pp complex or something, lol
Love how fast the nozzle gets frosty
What is the purpose of it
@@STTP69 It doesn't have any use. It's just something that happens naturally.
The same thing happens when you remove the valve from a inflated tire: due to the air flowing out of the tire so fast through that little orifice, it makes that the air gets cooler as it gets out the tire, which is why the tire valve starts freezing after some time when the air escape from the tire.
My guess here is that the nozzle is right in the way of the flow of air the turbo is sucking in, and the air is sucked in so fast that the same phenomenon happens due to the nozzle being a very small surface similar to a tire valve.
@@dosh8276the liquid nitrous experiences a drop in pressure and evaporates. This causes the nitrous to absorb lots of heat, thus cooling the nozzle.
This is called vapor compression.
It needs another, aint no way it’s getting enough
The best was when it went unfrosty
Most people get a turbo for their engine, this dude got a engine for his turbo.
It’s actually not a turbo it’s a centrifugal supercharger😎
@@Crypticboss1 aCtUaLLy.. No, it _is_ a turbo..
@@hhasteit’s a procharger
The other name is dee
My old azz had to look for about five seconds figuring out what I was looking at 😂. I’m lost but like it 😂
That snail looks pissed af 😈
Turbo the snail
Only problem don't see the turbo lighting up with RGB like in the movie Turbo
LMAO!!
@@neddy1287 You have attracted the pc gamers. Now we are here and we will rgb everything 😊 say goodbye to your family
@@adventuringboysbeatz2945 Suppose you haven't watch the movie called Turbo to understand my point of RGB so you say you RGB everything including your toilet bowl so you can't miss the target while taking a dump 😂😂😂😂
The movie "Turbo" in a nutshell
😂🤣😂
So i'm not the only person who saw a snail win an Indy race, cool to know i wasn't tripping
@@LotsOfToubleUsuallySerious🤣🤣🤣
@@LotsOfToubleUsuallySeriouslmao
Volvo used a similar setup to provide instant boost with there turbo cars. It used compressed air to get the turbo upto to speed
I did not know that.. Thats pretty cool
@@ReroyChangthey don’t show it much but cleetus McFarland uses CO2 or something like it to keep cooler and spooled faster on mullet and a couple other cars
@@Rick_James I had a buddy that had a 03 Jetta Wolfsburg, and we installed a CO2 sprayer on his intercooler. The gas comes out sub-zero, and makes for a very good cooling booster for the charge air.
@@Rick_James they use co2 for boost control not to spool the turbo, he usually does not need it. he tried the nitrous trick like in this video 1 time at a high altide track cause it would not get on to the 2step fast enough.
@@jasonkay9345you’re better off to just spray water on the intercooler. Water can carry away much more heat. Simpler and cheaper. You can literally unplug your washer line and have it spray the cooler
This is so chill.
Literally 👍🏻
That whistle!
💪🏻
Especially on making engines spool up faster lol bad ass man!!!nitrous injection!!
Не азота ,а закись азота( веселящий газ),а азот 80% в воздухе,все остальное кислород и др газы.
How to get a turbo up to speed.
Or a MGU-K
スーパーチャージャーはターボと違います。ターボチャージャーはエンジンの排気で作動しますがスーパーチャージャーはエンジンの回転動力またはモーターで回転します。
very hard to get the engine to light off at high altitude.
Bro just snorted the fattest line and thought we wouldn’t notice😂
🤣😂🤣
Never actually seen it in action before, thanks for the vid
👍🏻👍🏻👍🏻
Holy moly hot mamma macaroni and WOWZA!!!!!
😂🤣😂
Didn't know you could inject it like that. Nice
It’s not recommended
@@Stopinvadingmyhardware never seen it sprayed like this .. why is it not recommended? Educate me
@@andrewgarcia4631 It can throw off your AF ratio if the there’re any thermal instability in the lines or bottle. Which can lead to catastrophic failures if it’s thrown too lean.
@@Stopinvadingmyhardware what is the ''normal'' way of using nitros in general?
@@NikosPer Are you serious? Go away
Such a beautiful sound
👍🏻👍🏻👍🏻
Forbidden combo in drag racing. And nice bigg ass turbo u got there 🎉
👍🏻👍🏻👍🏻
Wow this is fire , that turbo sounds so cool too
It’s really slurping up that delicious nitrous oxide 😋
Yes.. yes it is… 👍🏻👍🏻
Man, that's really a small one, you can still see the car behind it.🤣👍
Lol
Any turbo is better than none
Better drive the turbo you don't need a car seems like it by your comment
@@Ganja-w5d yeah your right, I don't need a car, I have a jeep. And it don't need a turbo. They don't work correctly on a real vehicles like jeeps. But if I had a skateboard, ??? Boy. I tell ya.
I remember this video. Can't figure it out so let's make the turbo larger. 🤪☝️👍👌... no really, it might work. Let's spend worthless money. 🤔👍
This is the best comedy scene yet. 🤪👈. How do you get over the larger turbo lag? You do know there's a turbo lag right? And the larger the turbo, the more lag. That just means it can't keep up.
I've got a better idea. . One stick of tnt and its to the moon. Sound good. ? I like it. Let me know if I can be of help. 😁
@@CKILBY-zu7fq ever heard of supercharger
Engine was about to throw a bearing 😂
That's just the 2-step
Or a piston
You say 2 step he thinks its a dance @mrctuned2844
That sounds nice
This is the coolest thing I've ever seen
You're a true inspiration.
bro had 5k horsepower in 10 seconds 💀
👍🏻
Cringe
Cringe
just for that edit I had to press thumbs down 🙁
edit: this isn't reddit
Cringe
My old car had nitrous....
And so did I....
One for the engine... one for me! LoL
🤣😂🤣
That's fkn funny
Never knew how it worked! Thank you for this! So damn cool!
Bewtiful a real piece of art right there
👍🏻👍🏻👍🏻
That’s cool to see, I’ve never actually knew how nos hit
I’ve never seen nos injection be used before the turbo. Seems like a pretty uncommon setup that could cause pooling in the intercooler 😂
Depending on if it’s a wet or dry nos system, usually the injector is placed at the end of the intake system, just before the inlet manifold or multiple injectors for each cylinder port.
Its more for show, like a hood ornament thats somewhat functional.
If the turbo was positioned correctly and the nos was fitted way after the intercooler it would actually make use of its potential. Its like spraying an inhaler in front of your face and trying to breath it in.
Clearly never played need for speed lol😂
It's one way to use nitrous, most of the time it gets more direct infection into the engine, this one typically helps the turbo spool quicker
@@eryczakpl2337 It won't make it spool any faster as it's the exhaust gasses passing through the turbine that spools up the compressor wheel.
The compressor wheel would probably spool slower actually compared to normal nitrous injection. Since there would be less nitrous molecules making it into the cylinders, so less cylinder pressure and exhaust pressure for the turbine. I think the only reason to do nos like this is for it to look cool lol.
now thats a monster🔥
👍🏻👍🏻👍🏻
car snorting nos like cocaine
😂🤣😂
The idle of that cam deserves a Grammy award.
👍🏻👍🏻👍🏻
burblblblblOOOOOOOWEEEEEEEEIIIIIIIII -the engine
This is so relatable, I love it.
I would put the injector all the way to the center for better results, just saying.
The turbo will suck it in fine from where it is, and once the turbo pulls it in it’s gotta go through a foot of 4” pipe then past the throttle body and into the intake where it’ll be distributed plenty evenly. Honestly he could have the nozzle protruding out 1/2” in front of the turbine housing and it would still draw every bit of that N2O in under boost.
He's not entirely wrong though. A major manufacturer (saab?) did pre turbo alcohol injection testing and found the vapor to be incredibly damaging to the blades.
However, another company did their own testing (devils own injection?) and found the damage could be mitigated by spraying at the center of the assembly.
This is my vague recollection at least. I believe it was postulated that the inside of the blade has a lower velocity than the outer edge, making it less susceptible to damage.
Sounds like my Windows 10
😂
Like the disc drive lol 😂
That engines heart about to give out like he just did a line and downed a redbull.
🤣😂🤣
That’s a happy turbo!
that was really cool to watch 😀
thx !
👍🏻👍🏻👍🏻
best video on the internet
👍🏻👍🏻💪🏻
So NOS is like coco but for cars
Pretty much 👃 ❄️ 🤧
Ssssssyyyyyyyeèeeaaaahahhhhhahahaha 🤯
I swear v8s love nitrous,make me so excited hahaha
Nitrous for a v-8 is like catnip for a cat.. makes them crazy..
Why would cylinder count matter? It’s a fixed percentage increase on any I.C.E.
That's one hell of a happy turbo!
That turbo got a good sniff of crack💀
🤣
Looks like that v-band going to the intake manifold is rotating
That's a good eye
i didnt notice too before i read your comment, really a good eye
it's not a v-band. it is a kind of flexible clamp
Isn't it one of thoose that have a lever to apply tension when closed? Maybe i explained it poorly so i'm sorry if you don't know what i mean. For reference tool boxes have a similar clamp style to keep them shut
It's a type of coupler
Lol point is, apparently he needs a plan b because it isn't cutting it
Do they sell water sprays too? Or ethanol?
You can try and piss on it as it runs XD
Water/meth, yes
Go baby go❤
👍🏻
laughing gas made me happy through the screen
Great way to pop the intake off when your turbo timer craps out :)
Turbo timer?? 😂🤣😂
Probably meant the VGT Actuator, seen on Variable Geometry Turbochargers, dont think this is a VGT setup.
Kids think they know everything; unless he’s making a Fast & the Furious manifold danger joke, then it’s okay 😂
It's like cocaine for cars 😂
😂😂🤣
Gotta love how the rotor gets a tiny bit smaller from the cold
Do you?
@@_..-.._..-.._ Don't we all?
I love watching the white fade from the tip
I thought I recognized that turbo! 💯
Yup that’s us!!! 👍🏻👍🏻👍🏻
@@ReroyChang 💪👍❤️
Imagine putting your finger in there 💀😭
Damn!!! That would be bad…. Really bad… 🤣
@@ReroyChang I bet lol 🤣
You first, me next 😂🤣😂
@@enjiegrows8531 HELL NAH 💀
How much. Yes
That's the fastest way to blow up your engine 😂
😂🤣😂.. you think so
When spraying nos your going to blow up any engine lol
@@ifuaintfirsturlast7551 exactly
Usually only the charge pipe pops off
This deserves a sub 🙏🙏
"TIGH, TIGHT TIGHT" turbo from breaking bad 💀
Learn something everyday 💯 GODSPEED
Freezing, then rapidly cooling from all the air flow. *Chef kiss*
That turbo sounds like its about send the car into time travel.
This is the coolest angle I've ever seen 😲🙌
👍🏻👍🏻👍🏻
Wow thats impressive man nice boost
👍🏻👍🏻👍🏻🙏🏼
Bro is racing time itself
🤣😂🤣
Your turbo is walking on sunshine ☺️
NOS is the whip-it’s of the car world.
🤣😂🤣
Nice🎉🎉🎉🎉🎉❤
Nothing like a bottle-lit big turbo
Amen to that.. 👍🏻
That's an angry snail.
Yup
That turbo gotta really nice engine
Beautiful sound! 😍
Sound turbo amazing..
👍🏻👍🏻👍🏻
It sounds cool
The blocks shaking withdrawls “I wantttttt moreeeee giveeee ittt tooo mee I want moreeee”
🤣😂🤣
Especially when it kicks in.....😊
so sick!!❤ more of this please.
👍🏻👍🏻👍🏻
The best short With the best qualited ever ❤!
Bro Kraig facts is hilarious “it’s a smother”😂
So much power it made that clamp move!!!!
Oh wow so much cool air to breath in ❤
This is beautiful
The turbo has got a nice car
Dam that’s an awesome shot of it in action normally you see a purge or if it’s running you can’t see the action.
Watching the tip of the injector unfreeze is sooo satisfying.😮💨😮💨
car is like ohhh shit gimme 1 more hit yea give it give it..... ohhhhhhhhhhhh YEEEEEEEEEEEEEEEEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
🤣😂🤣
Nos is a gateway
Yup
If only this was the real original Batmobile from the movie with Michael Keaton
notice how its aimed at the bottom portion of the intake helping the blades to spin faster
👍🏻
See the vibes, vid Stopped just short of the 🤯🔥☠️💃
When I put a 103 Garrett on my first 6.0. The only way to spoil it was a lil 75 shot off the line. It works better up by the throttle body. Or you can do it like that and just spray a lil more. Let off the brake and grab the spray at the same time. Priceless
Honest question here... now wouldnt the spray hitting the impeller be bad? Why wouldnt you put it on the compressed side after the impeller or does it really not matter? Both would have the cooling effect
When an engine inhales Laughing Gas 😂😂
this gives you the need for speed
The power of turbo 🔥
V8 + Turbo + Nitrous, this engine could fly a WWII Airplane