I made my own version of this recently. I'm a machinist by trade, so I used aircraft aluminum instead of wood. Mine was more toward function than beauty, however. This model is absolutely gorgeous, and the woodworker in me is jealous!!! Planing on incorporating your wonderful ideas of beauty into a Mark II version of mine. Wood will undoubtedly be slightly more weighty, but what is the world if we can't add our own beauty to it. Thank you for reminding me of that.
can i have a look at the Mark II version. it's great if it can be combined with wood. it will look more beautiful. thank you very much. have a nice day
@@woodarttg Absolutely. Though don't expect it any time soon. My current design took me a bit short of a year to design, re-design, and build. Have made a high-tech reminder to post a pic or two here when it's done though. By high-tech I mean I thumbtacked a post-it-note on my worktable. 😄
@@TREETOPCHOPPA762 I see your mistake. I did not make my design based on Wood Art's design, or video. I made my own design, which took me a year, off and on, to finish. I actually finished mine in Aug '22. So I was not saying I took his design and then took a year to make mine. I was saying I made mine over a year, and THEN saw his. I was commenting on Wood Art's design and use of wood, and expressed a desire to incorporate many of his ideas into a re-design of my own. As an example: I used a lever action to reload mine, instead of the pump action Wood Art used. I intend to test that pump action design and see which works best for me and mine.
It's nice to see someone using simple everyday tools for once. Too many times woodcraft videos portrays whole laboratories of high end tools too costly for the average enthusiast. Kudos! 👍
Im not incredibly handy but this "marble shooter" is a very nice piece of handmade ART. Absolutely amazing my friend and very intricate. Very nice indeed.🙂👍🏻🙏🏻🙏🏻🙏🏻
Nice project and good use of simple tools. ;) Little tip for ya: When you glue wooden surfaces, cover the entire mating surface in glue. Any area you leave bare will react to moisture differently and since this will be going outside and be stored inside, you are going to get lots of moisture fluctuation. Furniture built improperly can and will tear itself apart, even when it spends it's life inside. If you want real durability switch to Titebond 3 after you prototype with CA. I love CA, but its got nothing on the strength of proper wood glue. Cheers!
@@djdynieldaniel1395 He got thin CA along the joint lines, which is great as it will seep in and seal, but CA is a brittle glue with very little strength when it comes to lateral movement. And more moisture = more movement. As for the finish, aside from high grade marine spar varnish or similar, any finish can and often will fail somehow. When you use a wood glue and cover the entire surface you create a bond so solid that the wood will fail first the majority of the time, moisture-be-damned. :)
@@djdynieldaniel1395 So much of woodworking is trying to mitigate the potential failures. The glue, the joint surfaces, the finish... it all comes down to use-case and materials. I'm just offering advice on upgrading the product along those lines.
good video idk about the instructional aspect thougj... there arent really any explanations for what things are and there was NO footage at all for how you did the knots at the end of the rubber cords after putting them through, overall though it was good i think
Oh, this is well designed! Much of an improvement over the typical "single shot breech" versions. a small, jointed wood, lever arm (Winchester), incorporated in to pump slide, could VASTLY improve tension and reduce user fatigue (not assist, just removes slack motion). A "Rear Passthrough Chamber Slide" (aka a port on rear of breech) would allow you to manually load a single plumbata/bolt (an short arrow) for larger game / О, это хорошо разработано! Значительное улучшение по сравнению с типичными версиями с однозарядным затвором. небольшой шарнирный деревянный рычаг (винчестер), встроенный в золотник насоса, мог бы ЗНАЧИТЕЛЬНО улучшить натяжение и снизить утомляемость пользователя (не помогает, а просто устраняет слабину). «Задняя сквозная камера» (также известная как порт на задней части казенной части) позволит вам вручную загрузить одну плюмбата / болт (короткая стрела) для более крупной дичи.
@@woodarttg Bro, trust me, this is your talent. You have the tools and especially the patience. I watch how you work each parts, all I keep repeating to myself, is this guy knows what he's doing. For sure this is your craft.
2:10 that saw is soooo laggy 🤦🏽♂ .... probably needs a tool update 🤷🏽♂HAHAHAHAHAHA awesome video bro, lotts of hard work and delicate wood working, VERY WELL DONE 💪🏽💪🏽👍🏽👍🏽🤙🏽🤙🏽your a master 🙏🏽👼🏽🙏🏽
Awesome dude! I dig, I dig your survival marble slug rifle! Definitely will work in a survival situation! I’m sure it will even if one uses small round pebbles! Excellent!
Great woodworking skills, and nice toy, but this is not going to do much in a survival situation. Try head to head with a grizzly and see if it tickles him. lol This will not produce enough velocity for true defense. Keep going with your creations though. 👍🏻
Great design, but if I may I can see that if you make a MK 2 version that either the stock or the body is elongated so the hilt of the stock can sit on your shoulder for those accuracy shots. Elongating the body would add more weight on the front end, You might also consider adding some lead into the elongated stock so that it counterbalances the front body with the fulcrum somewhere around where you place your front hand, this will give it much better balance - I've seen stocks that have a longer curved top section so that it partially sits on top of the shoulder for even more stability. Otherwise a GREAT zombie apocalypse design. My only slight criticism would be to use proper wood glue instead of CA considering the forces you are putting into this, CA glue has a low shear resistance and you REALLY don't want this to have a failure while fully cocked.
Looks awesome. I would have liked to see the entire field of view when the shot is made to validate it is the featured weapon's projectile hitting the target. In fact, it makes me skeptical..
Its a musket, it fires one slug at a time. Shot guns are mostly for spray pattern of a lot of tiny balls when fired. the slug shattered on impact that's an explosion. Not a shot gun.
i think many non-english speaker mix the words "Pump action shotgun" and just say whatever. I've seen that a lot in my travels, as long as it rings a bell in others head. its a pump action musket. This and maybe the fact he doesnt know he can change the title once it's uploaded
Fantastic work! You are very talented. You should set up an on line store for those who can’t make their own but want to buy your beautiful art. Then post a link to your store in the description.
It's a little sad to me that this video won't be truly useful until long after the internet is gone and the zombies have come. Love this video, love seeing the process.
Do you mean, High-density polyethylene plastic? If so, probably because it's toxic, expensive and not readily available. That and the fact it would likely act differently to the wood super glue, especially if trying to combine this plastic with wood together on the same or similar build.
привет. эпоксидная смола хорошо прилипает к деревянной поверхности. время высыхания слишком велико, я думаю, вам может потребоваться много времени с эпоксидной смолой,
Your info says you can make anything out of wood. How about a 40" flat screen TV? *not just the case, all of it, LED's included out of wood. No copper wiring allowed. I have to admit, this was a good idea and where do I get the plans?
Desde chico siempre fui Tirador sensacional Puntería de precisión Lu lu la la lu Con la piedad de un cazador Ya voy! Da justo en el blanco así Y te doy! De la isla tirador vino este varón Lu Lu Lu Lu Lu La La Pronto huye ya! Sogegesogesoge El rey tirador!
Very good result and also powerful enough for defense. The one who is able to copy this, can call himself "wood artist" - but for me it would be too complicated to build.
Great vid, but the fact that you try to manipulate the results by changing the camera shot and getting closer to shoot the target out of the camera view was a little much. You can literally see the edit at 10:55
I made my own version of this recently. I'm a machinist by trade, so I used aircraft aluminum instead of wood. Mine was more toward function than beauty, however. This model is absolutely gorgeous, and the woodworker in me is jealous!!! Planing on incorporating your wonderful ideas of beauty into a Mark II version of mine. Wood will undoubtedly be slightly more weighty, but what is the world if we can't add our own beauty to it.
Thank you for reminding me of that.
can i have a look at the Mark II version. it's great if it can be combined with wood. it will look more beautiful. thank you very much. have a nice day
@@woodarttg Absolutely. Though don't expect it any time soon. My current design took me a bit short of a year to design, re-design, and build. Have made a high-tech reminder to post a pic or two here when it's done though. By high-tech I mean I thumbtacked a post-it-note on my worktable. 😄
@@ryimscaith1593 that's great.thanks friend.hope to connect with you
@@ryimscaith1593 wate but the vid came out 1 month ago ur little less than a year story aint addin up
@@TREETOPCHOPPA762 I see your mistake. I did not make my design based on Wood Art's design, or video. I made my own design, which took me a year, off and on, to finish. I actually finished mine in Aug '22. So I was not saying I took his design and then took a year to make mine. I was saying I made mine over a year, and THEN saw his.
I was commenting on Wood Art's design and use of wood, and expressed a desire to incorporate many of his ideas into a re-design of my own. As an example: I used a lever action to reload mine, instead of the pump action Wood Art used. I intend to test that pump action design and see which works best for me and mine.
It's nice to see someone using simple everyday tools for once. Too many times woodcraft videos portrays whole laboratories of high end tools too costly for the average enthusiast.
Kudos!
👍
hi. i have a lot of simple hand tools. i'm glad you like it. thank you. have a nice day
@@woodarttg Not a shotgun.
Vcs vendem?
Vende ou não
मुझे आपका नंबर चाहिए
Dude, that coke nail is pretty gnarly
Yes, it will be really useful when the planet is invaded by bottles of fizzy drink from another galaxy.
ha ha ha
Well done indeed! More of a sling-rail than a shotgun, clever none the less. I like the pump action!
Thank you very much
Massive appreciation at this piece considering you were using simple hand tools. It looks beautiful. Well done 😍
thank you.have a nice day
I'm jealous as hell that these guys are able to build their stuff with exotic wood, just because it grows all around them.
Hello. Thank you for your comments. Have a nice day
Wow, I would not have thought to turn an angle grinder into a spindle sander, I gotta keep that one in mind.
Thank you for showing me techniques for hand tools. I don't have power tools or grinders like other people so it's nice to see other ways to build.
Have a good day
A beautiful piece of engineering. Well done!
thank you brother
Appreciation at this piece. Did he cleaned the bush for animals and or children before walking in bare footed?
Thank you for leaving a comment. I cleaned up se.have a nice day
Just think of the animals and people that are going to walk by and step on the glass,, really smart man,, way to go😢😢😢😢😢
You're right, I've cleaned it up with a support tool
Im not incredibly handy but this "marble shooter" is a very nice piece of handmade ART. Absolutely amazing my friend and very intricate. Very nice indeed.🙂👍🏻🙏🏻🙏🏻🙏🏻
thank you for the compliment.it helped me a lot.have a nice day
Spot on - very aesthetic, excellent wood working skills
Thank you very much.have a nice day
Would love a step by step video possibly with measurements 😊
i will add that for the next videos.thank you have a nice day
So nice to see that i actually have the tools to build one of these builds!
Thank you for your comment. Have a nice day
back to the dark ages, well done.
Good to see you're using the old marbles!
great have a nice day
Like, like, like y más likes!
Muchas gracias por sus vídeos!
Saludos desde Santiago de Chile!
thank you brother have a good day
10:28 😱HOLEY KRAPP THAT'S AWEOSME😱 and got some power too
thank you brother.have a nice day
I'll stick with my Mossberg!!
That's one bad ass slingshot
excellent wood working skill.amazing
thank Bro. Have a nice day
Nice project and good use of simple tools. ;)
Little tip for ya: When you glue wooden surfaces, cover the entire mating surface in glue. Any area you leave bare will react to moisture differently and since this will be going outside and be stored inside, you are going to get lots of moisture fluctuation. Furniture built improperly can and will tear itself apart, even when it spends it's life inside. If you want real durability switch to Titebond 3 after you prototype with CA. I love CA, but its got nothing on the strength of proper wood glue. Cheers!
thanks for your opinion.you are amazing.have a nice day
It seemed like he scealed everything afterward.
@@djdynieldaniel1395 He got thin CA along the joint lines, which is great as it will seep in and seal, but CA is a brittle glue with very little strength when it comes to lateral movement. And more moisture = more movement. As for the finish, aside from high grade marine spar varnish or similar, any finish can and often will fail somehow. When you use a wood glue and cover the entire surface you create a bond so solid that the wood will fail first the majority of the time, moisture-be-damned. :)
@@djdynieldaniel1395 So much of woodworking is trying to mitigate the potential failures. The glue, the joint surfaces, the finish... it all comes down to use-case and materials. I'm just offering advice on upgrading the product along those lines.
Wow that would be fun to have and to admire
thank you.have a nice day
very nice. A true craftsman.
thank you brother have a good day
good video idk about the instructional aspect thougj... there arent really any explanations for what things are and there was NO footage at all for how you did the knots at the end of the rubber cords after putting them through, overall though it was good i think
Thank you. Thank you for watching and leaving a comment. that helps me to grow more. have a nice day.
Reminds me of The Slingshot Channel
I love these videos they give me more ideas of survival for the apocalypse
Thank you
im impressed
thank you brother.have a nice day
Lots of good woodworking strategies in this.
Thank you very much. When you watch and leave me comments
I’d definitely buy one ☝️
thank you that's great.but i don't sell the product because i'm not licensed
@@woodarttg I think it would classify in the same terms as a slingshot but if you do decide to sell, it must be in pieces.
That's beautiful! What amazing human craftsmanship. Thank you for sharing this awesome marble blaster.
Thank you very much.have a nice day
Spectacular!
Great new music, thanks so much!!!
thank you brothers. have a nice day
Oh, this is well designed! Much of an improvement over the typical "single shot breech" versions. a small, jointed wood, lever arm (Winchester), incorporated in to pump slide, could VASTLY improve tension and reduce user fatigue (not assist, just removes slack motion). A "Rear Passthrough Chamber Slide" (aka a port on rear of breech) would allow you to manually load a single plumbata/bolt (an short arrow) for larger game
/
О, это хорошо разработано! Значительное улучшение по сравнению с типичными версиями с однозарядным затвором. небольшой шарнирный деревянный рычаг (винчестер), встроенный в золотник насоса, мог бы ЗНАЧИТЕЛЬНО улучшить натяжение и снизить утомляемость пользователя (не помогает, а просто устраняет слабину). «Задняя сквозная камера» (также известная как порт на задней части казенной части) позволит вам вручную загрузить одну плюмбата / болт (короткая стрела) для более крупной дичи.
this is y i nvr get sleep
..cuz i keep finding vids like these....
thank you have a nice day
Well done. The human mind is an impressive tool
thank you.have a nice day
This is a work of art. No way, I would be able to make it myself. But would def order one if it was available and affordable.
thank you.you can do it with your own custom.have a nice day😀
@@woodarttg Bro, trust me, this is your talent. You have the tools and especially the patience. I watch how you work each parts, all I keep repeating to myself, is this guy knows what he's doing. For sure this is your craft.
@@woodarttg dude! No one... I mean absolutely no one is making their own.... Too difficult
This is indeed a work or art
I'm not sure how it would work for hunting/combat/survival
@@Stop_Gooning 🥰
Oh man !!! After all that work I'd be drinking that beer....
thanks for your comment.have a nice day
Making a functional fire arm from everything they won't be snatching nice
Beautiful.
a great idea thank you.have a nice day
2:10 that saw is soooo laggy 🤦🏽♂ .... probably needs a tool update 🤷🏽♂HAHAHAHAHAHA awesome video bro, lotts of hard work and delicate wood working, VERY WELL DONE 💪🏽💪🏽👍🏽👍🏽🤙🏽🤙🏽your a master 🙏🏽👼🏽🙏🏽
thank you. that saw is too old. have a nice day.
Awesome dude! I dig, I dig your survival marble slug rifle! Definitely will work in a survival situation! I’m sure it will even if one uses small round pebbles! Excellent!
thank you brother. I am very happy to receive your comment. have a nice day
Great woodworking skills, and nice toy, but this is not going to do much in a survival situation. Try head to head with a grizzly and see if it tickles him. lol This will not produce enough velocity for true defense. Keep going with your creations though. 👍🏻
Thank you for your opinion. I appreciate it. have a nice day
Joergsprave would be proud
Good job
thank you have a nice day
Superb work! What sort of wood were you using please?
Red-wood. Have a nice day.Thank you for leaving a comment
And they say guns can be taken away. Lol. Awesome.
some places may be banned from use.thank you
Genius.. awesome
thank you brother
Congratulations for using a glass bottle as your target, I somehow doubt you cleared the glass debris and shards from the grass.
Great design, but if I may I can see that if you make a MK 2 version that either the stock or the body is elongated so the hilt of the stock can sit on your shoulder for those accuracy shots. Elongating the body would add more weight on the front end, You might also consider adding some lead into the elongated stock so that it counterbalances the front body with the fulcrum somewhere around where you place your front hand, this will give it much better balance - I've seen stocks that have a longer curved top section so that it partially sits on top of the shoulder for even more stability.
Otherwise a GREAT zombie apocalypse design.
My only slight criticism would be to use proper wood glue instead of CA considering the forces you are putting into this, CA glue has a low shear resistance and you REALLY don't want this to have a failure while fully cocked.
Thank you for your opinion. I will incorporate your comments to make it better. Have a nice day
True!!!!!
Yo that dope👍
Interesting but... Try firing it with the target in the same frame.
thanks for your comments. i will do it so you can see in the additional video
Looks awesome. I would have liked to see the entire field of view when the shot is made to validate it is the featured weapon's projectile hitting the target. In fact, it makes me skeptical..
thank you. that was my mistake. i will shoot in a frame so you can see. have a nice day.
Its a musket, it fires one slug at a time. Shot guns are mostly for spray pattern of a lot of tiny balls when fired. the slug shattered on impact that's an explosion. Not a shot gun.
🤣🤣🤣
you're really funny
@@woodarttg he is not funny, he is correct = it is a musket. why don't you video it shooting a watermelon instead of a glass bottle.
@@jamesha175 Don't worry I've cleaned up all the debris.
i think many non-english speaker mix the words "Pump action shotgun" and just say whatever. I've seen that a lot in my travels, as long as it rings a bell in others head. its a pump action musket.
This and maybe the fact he doesnt know he can change the title once it's uploaded
Love your stile tiger
Thank you very much
Beutiful work! What kind of rubber band/tube is this?
thank you very much.this is a .4.5mm rubber band
Genius
thank you brother.have a nice day.😀
I used to have a modified nerf gun that could shoot marbles. You could literally hunt small game with it
it's amazing. wish i could see it. thank you have a nice day
Nice job,very cool lines. The geometry is good too .
Thank you so much. I'm glad you watched all of my videos. Have a nice day
I have to admit at 1st I thought oh another dumb Slingshot this was pretty cool I give the guy a lot of credit
thank you brother.have a nice day
Fantastic work! You are very talented. You should set up an on line store for those who can’t make their own but want to buy your beautiful art. Then post a link to your store in the description.
a great comment.thank you very much.have a nice day
can you try it with D20s?
Make it a machine, rubber bands and a reel spindle
una buona idea una macchina che funziona sempre.
Very beautiful workmanship
In a survival scenario I'd opt for a rope-sling
Thank you brother. I am very happy to receive your comment. Have a nice day.
wow ! amazing and beautifull !!!! :D
Could you please tell what glue you use ?
Thanks for this nice piece of art !
Thank you for your interest. The glue that I use is super glue for wood. glue 502.
@@woodarttg Thanks a lot :D
It's a little sad to me that this video won't be truly useful until long after the internet is gone and the zombies have come. Love this video, love seeing the process.
thank you.have a nice day
is that box with the spring in like the lower reciever :)
no, you can slow down the video to see the reloader. have a nice day
That's cute a toy wooden musket complete with marbles to bounce off a cardboard box😂😂😂
😂😂😂
Молодец! Хорошая работа!
привет большое спасибо мы очень рады получить ваши комментарии
As an Engineer, I have t oadmit that given most things, we will try to make a weapon of it because GUNS ARE FUN.
just a light slingshot.have a nice day
Holy cow, please make this 3d printable ‼️
😁😁😁😁
This intense multipurpose angle grinder (?) action.
Thanks have you tried this angle grinder yet
@@woodarttg i didn't even know this was possible before this video.
How many hours did you have in this project? Very nice work.
thank you.it took me 24 hours to finish it,have a nice day
pretty cool and i want it
thank you
Well you could make it blueprints available.
Cute
thank you.have a nice day
I like this but can you make one like a Big Ass Handgun
Thank you for your comments. I will make it out of wood
What adhesive are you using??
the glue that i use glue 502.you can buy it at app shoppy.have a nice day
Id build it out of industrial cutting boards for commercial kitchen as a spine assembly
Thank you for your comment. I'm not sure I understand what you mean. have a nice day
Do you mean, High-density polyethylene plastic? If so, probably because it's toxic, expensive and not readily available. That and the fact it would likely act differently to the wood super glue, especially if trying to combine this plastic with wood together on the same or similar build.
I don't want to make one. I want to buy one. I could never make one that good
Thank. I am not licensed to sell products. I will send it to you as soon as I have the license
Nice idea but I wonder how many shots it took for that slide to explode. A dozen at most?
If you hit one shot, you're a genius and expertly trained
crazy but perfect
Да Брат крутая штучка получилась!!! Правда я бы склеивалбы на эпоксидную смолу!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
привет. эпоксидная смола хорошо прилипает к деревянной поверхности. время высыхания слишком велико, я думаю, вам может потребоваться много времени с эпоксидной смолой,
@@woodarttg Спасибо Брат!!! 😎👌🙂☺😀😄🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
It's amazing but it looks like a single use no guarantee
don't worry, it's still working fine for the moment. thanks for your opinion. have a nice day
for some strange reason whole world is preparing for survival and apocalypse. we can't ignore this fact something is definitely coming up.
hi. you are referring to the end of the world. what happened.
it works even with rubberballs
that's right.you can replace the highball.have a nice day
Makes want to go craft some pipe guns in fallout 76 kinda similar
radioactive.danger.i think it's too dangerous.have a nice day
Your info says you can make anything out of wood. How about a 40" flat screen TV? *not just the case, all of it, LED's included out of wood. No copper wiring allowed. I have to admit, this was a good idea and where do I get the plans?
a wooden TV. You have to get a copy from a real TV. To make the smallest details, it takes quite a bit of time.
You can use fire works and any thick tube to launch projectiles gun powder isn't hard to make at home
Yes but you can't make a TH-cam video about that anymore. They usually classify it as bomb-making instructions
Desde chico siempre fui
Tirador sensacional
Puntería de precisión
Lu lu la la lu
Con la piedad de un cazador
Ya voy!
Da justo en el blanco así
Y te doy!
De la isla tirador vino este varón
Lu Lu Lu Lu Lu La La
Pronto huye ya!
Sogegesogesoge
El rey tirador!
Gracias. Que tengas un buen día. Eres gracioso.
Very good result and also powerful enough for defense. The one who is able to copy this, can call himself "wood artist" - but for me it would be too complicated to build.
thanks for your opinion.have a nice day
Maybe useful for survival, but using a slingshot for defense is asking to be killed.
Now you have to pick up all that glass
Don't worry I cleaned it up
What kind of liquid glue are you using?
hi.this is super glue.wood glue.glue 502
I would love to have one of those can I buy one from you
thank you.I can't sell the product because I don't have a license.Thank you for your interest.have a nice day.
Is that some type of super glue that you're using? The reason I ask is because it appears that it sets almost immediately. Thanks
that's it. The glue that I use glues fast in 3 seconds. thank you.have a nice day
@@woodarttg but I've never had super glue that works so fast on any type of material?
What the heck is that instant strong glue 😯
this glue stick in 3 seconds .it's still good till now
Thank you for your opinion
What is it please
@@BobbyB24601 glue used to glue wood. 502 glue you can buy from shoppy app
Great vid, but the fact that you try to manipulate the results by changing the camera shot and getting closer to shoot the target out of the camera view was a little much. You can literally see the edit at 10:55