I have watched your video three times now making reference to the correct way to operate this Pole Saw and adjust the saw blade...Actually have had my workers watch it..Thanks for posting!
This is very similar to the telescoping model I bought in 1997. But that came with an 8" bar and chain. I put a longer bar on it. A Husqvarna bar fits well. The model I bought had problems with the chain oiler. But the Echo dealer in Redding, Calif. got me the upgraded one for a good price. So check your oiler. And please don't neglect the sprocket tip of the bar. Those are bearings in there and they need care. I always over-grease that part to help flush out chips and dirt. Good video. Thank you.
My Power Pruner was purchased in 1996 or '97. Back when Power Pruner was its' own company. But they had Echo motors on them. About 5 years later I got the improved cutting/oiling head, but it still didn't have the branch remover hook. I was glad to see that in your video. I have had on and off carb problems with this saw, so it was not used as much as I would have liked. But I basically do recommend this saw. Note, I would also get in the back of my truck. Have many times. But I suspect the Echo company would not like you to go there. OSHA and all that crap, you know.
I got one better, but only do with clean and sober living, standing in tractor loader bucket. Stable high platform tractor Bucket works great on my estate. Keep in mind limits of this tool and when tree climbing is needed with full safety gear and my light pruning Echo CS-330 climbing saw
markthomasbuilder Got it the next day. Wow! Should have gotten one sooner. A lot of power and runs great. Can get heavy if you have to hold it overhead but I highly recommend it. Thanks for your reply. Brush cutter on order.
+Jeanette Waverly I've trimmed a lot of branches with the Fiskars pruner over the years and always wished I had a power pruner. The Echo PPT-280 really does an amazing job and it's easy to use. I also think it's fun to operate, so I'm going all around my property looking for things to prune. Thanks for commenting!
Lol! I know the feeling! Next time you're out in California, bring that monstro-pruner with you! I've got a half-dozen oak trees on my land that need it.
Never cut standing under, Great tool for roof tree clearing while standing on roof or using free standing ladder for light ground trimming. Generally, trimming trees with ladders has many limits. Only use ladders for small cuts. Safety climing gear is best
Yes, low pitch and two story high made this tool a winner clearing trees from roof. Now if I can get bar oil flowing. Thanks for help. I may phone contact Echo. Yes, always leaked, poor oiler design, but great small engines.
You mentioned cutting the collar flush for general pruning, but does that not allow rot to travel into the main trunk, or is that only for certain trees?
The instruction manual doesn't clarify how close to cut it per tree species. I try to cut it as close as possible for appearance reasons. I'll have to read up on this topic.
no its better to cut flush.....if you do it right the tree grows over the wound and closes which makes it healthier for the tree. any protruding limb makes it prone to disease or rot so less is best.
peter gibson: Mr Gibson-- Please, not flush. The same authorities who forbid stubs, also explain that on a LIVING tree, a flush cut makes too big a wound. It is recognized that you must cut where the branch collar meets the limb. (Cut where the funnel shape ends.) It protrudes a wee bit but is still where the healing (sealing) hormones will grow it over and contain any problems that develop later.
I tend to agree, and i've heard not to cut flush far many more times than to cut flush. Guess it's up to how someone was originally trained and how they do business. Seems there are two distinct schools of thought on the matter of whether flush or not flush promotes disease. I'm going to wait and see how my limbs heal to make the decision for myself.
I don't know the weight off hand. It's definitely balanced decently, so you can easily manage it. They make a 4' extension accessory, but I'm guessing it would start to get hard to handle at that length. ECHO gave me the gear, so I wore it in the video. Overall, this pruner sure beats going up on a ladder with a chainsaw.
Yes, it is very heavy and awkward, to use, for more than 5-minute periods; however, Husqvarna makes a very good support-harness-vest, that is meant to be used, with many garden tools, the Husqvarna XT Harness, $190. w/FreeShip... Cannot find anyone, doing yard-work, without it, in Sweden...
I've only run the Echo pole saw and really like how it works. I just used it the other day to cut a small tree that fell on my shed. I've watched someone run a Stihl pole saw a few times they do a nice job as well. Sorry I can't help any more than that.
Myself, I’ve had issue from day one with my exact same Echo trying to die in a 90 degree vertical position. Been worked on under warranty 3 times. Warranty out now. No mechanic is going to run in real cutting situation long enough to get it to do it. Starts and runs fine otherwise. Worked on fuel pick up and carb?????
From day 1 new, chain oiler has always had major issue leaking when not used and now no oil hits bar. Echo PPT 2400. I'm good with tools, but nothing seems to work to get oil flowing to chain and see no visible issue. any ideas? Echo engines are bullet proof. but this oiler is a mess
My oil reservoir has a slight leak over time. I haven't tried to fix it, since it's a minor issue. I'm not sure about the oil flow issue. Here's the Echo support page. I thinks it will be helpful for fixing your problem: www.echo-usa.com/Support-Help
I found and fix oil leak. Echo 2400 oil tank has a pin hole with a one way air valve at bottom of tank. Cheap rubber valve and poor design, I blocked it off and put my own air valve at top of tank. Echo engines are excellent.
Yes they sent it for me to make a video with and no other payment. I just show actual footage of it going to work. It's an amazing saw that's taken care of some tree issues after storms. Much nicer than going up on a ladder.
I have a great appreciation for the Echo company. But in this case they did not do their homework. Let's make this easy -- look up the 3 Step cut in any good tree book, or online. This is not up to someone's training or feelings about pruning. This is the scientific method that informed foresters and professional arborists use. The point, like surgery on you, is to do what's best for the tree. To promote healing. And a good job.
When things are given for free, it is seriously difficult to be truly honest with any review. As with most companies, they require signed papers that you are not going to show their product in a bad light. So this becomes a sales video and not a honest review.
I made this video as part of the ECHO ambassador program. ECHO wants to be the best in the industry, so they want real feedback in order to continually improve. I showed this pruner put through my tests and it passed. I made an update video last summer using this tool and it performed well. If something breaks, I show the customer service I get with a warranty claim. If I don't like the product from the beginning, I won't make a video review. I try to seek out the best tools out there, that's why I don't get too negative in my videos.
Ugh, I need to use my echo pole saw about twice a year, and it never starts. Never. I get it serviced by a professional, it works and the next time I need to use it.... nothing. I can keep pulling that chord till the cows come home, but won't start. When it works, it works well though.
Mine seems to get flooded and can be hard to start at times. It's been awhile since I've had the issue, but it seems like the only way it starts is by removing the air filter, put the choke on, use one hand to keep the throttle squeezed, and then try starting it. I bet it will start within 5-10 pulls.
Sorry if I didn't show how to extend it. I actually have it all the way extended at the 5:32 mark. In order to extend it, you twist a knob 3-4 turns and the saw telescopes out.
STIHL Pole Saw is Best. STIHL Is Best. I have all my chainsaws Stihl and im Happy One time i purchased Echo Trimmer brand new and Never again. I mean is good first two month and after two months not good quality But stihl always same and power same.
I really did my home work when deciding to get the echo or stihl, and ended up finding more flaws and negative comments about the stihl. so went with the echo with the trimmer style handle instead of the D handle used in this video, and love it.
kakarot: I went with the Echo. It was purchased from Baileys around 1996, so it may be one of the original models. It was made by the old Power Pruner company, before they sold out to Echo. But it has the Echo engine. The two problems with this model were the oiler for the chain. Eventually I just got a whole new cutting head from an Echo dealer. Now it's better. The other thing seems to be carburation. Once the thing is warmed up and in operation it is good. But it takes sweat and effort to get it there. Therefore when that industry came out with smaller ones (Poulan, Craftsman) I got that for smaller jobs. Let me say at this time, if your research indicates that the problems with the Echo have been ironed out, then I would recommend it for purchase.
I have watched your video three times now making reference to the correct way to operate this Pole Saw and adjust the saw blade...Actually have had my workers watch it..Thanks for posting!
That's cool! I appreciate the comment. I'm planning on using this tool for a big project tomorrow. It sure comes in handy!
This is very similar to the telescoping model I bought in 1997. But that came with an 8" bar and chain. I put a longer bar on it. A Husqvarna bar fits well.
The model I bought had problems with the chain oiler. But the Echo dealer in Redding, Calif. got me the upgraded one for a good price. So check your oiler.
And please don't neglect the sprocket tip of the bar. Those are bearings in there and they need care. I always over-grease that part to help flush out chips and dirt.
Good video. Thank you.
My Power Pruner was purchased in 1996 or '97. Back when Power Pruner was its' own company. But they had Echo motors on them. About 5 years later I got the improved cutting/oiling head, but it still didn't have the branch remover hook. I was glad to see that in your video. I have had on and off carb problems with this saw, so it was not used as much as I would have liked. But I basically do recommend this saw.
Note, I would also get in the back of my truck. Have many times. But I suspect the Echo company would not like you to go there. OSHA and all that crap, you know.
Haha, I know that standing in the bed of the truck was pushing the limits a bit. Glad to know you recommend the saw.
I got one better, but only do with clean and sober living, standing in tractor loader bucket. Stable high platform tractor Bucket works great on my estate. Keep in mind limits of this tool and when tree climbing is needed with full safety gear and my light pruning Echo CS-330 climbing saw
Nice video highlighting both the features of the Echo PPT-280, but also regarding safety gear and safety practices.
Thanks for the comment!
Thanks. Probably getting this and the SRM 41OU brush cutter today. Echo= quality+value.
The power pruner sure beats having to go up on a ladder. Hope it works well!
markthomasbuilder Got it the next day. Wow! Should have gotten one sooner. A lot of power and runs great. Can get heavy if you have to hold it overhead but I highly recommend it. Thanks for your reply. Brush cutter on order.
It did the job, all right! I might graduate to this one someday. Right now, I'm happy with my Fiskars manual telescoping pruner.
+Jeanette Waverly I've trimmed a lot of branches with the Fiskars pruner over the years and always wished I had a power pruner. The Echo PPT-280 really does an amazing job and it's easy to use. I also think it's fun to operate, so I'm going all around my property looking for things to prune. Thanks for commenting!
Lol! I know the feeling! Next time you're out in California, bring that monstro-pruner with you! I've got a half-dozen oak trees on my land that need it.
+Jeanette Waverly Haha, will do!
Echo man in action saving the day
Haha, this saw can get a lot done in a short time.
Engine sounds good. Is that 4 stroke?
Nope a 28cc 2-stroke.
Good looking truck.
Thanks, I now have an SUV and want to switch back to a truck.
Nice informative video. Just one question though, did you get the Echo underwear too?
Haha! Echo set me up very well. Glad you liked the video!
Never cut standing under, Great tool for roof tree clearing while standing on roof or using free standing ladder for light ground trimming. Generally, trimming trees with ladders has many limits. Only use ladders for small cuts. Safety climing gear is best
If the pitch of the roof is a 4:12, then I feel comfortable doing that.
Yes, low pitch and two story high made this tool a winner clearing trees from roof. Now if I can get bar oil flowing. Thanks for help. I may phone contact Echo. Yes, always leaked, poor oiler design, but great small engines.
You mentioned cutting the collar flush for general pruning, but does that not allow rot to travel into the main trunk, or is that only for certain trees?
The instruction manual doesn't clarify how close to cut it per tree species. I try to cut it as close as possible for appearance reasons. I'll have to read up on this topic.
+markthomasbuilder thank you!
no its better to cut flush.....if you do it right the tree grows over the wound and closes which makes it healthier for the tree. any protruding limb makes it prone to disease or rot so less is best.
peter gibson: Mr Gibson-- Please, not flush. The same authorities who forbid stubs, also explain that on a LIVING tree, a flush cut makes too big a wound. It is recognized that you must cut where the branch collar meets the limb. (Cut where the funnel shape ends.) It protrudes a wee bit but is still where the healing (sealing) hormones will grow it over and contain any problems that develop later.
I tend to agree, and i've heard not to cut flush far many more times than to cut flush. Guess it's up to how someone was originally trained and how they do business. Seems there are two distinct schools of thought on the matter of whether flush or not flush promotes disease. I'm going to wait and see how my limbs heal to make the decision for myself.
Do y'all like the loop handle or no
I like that type of handle. I think it works well in many situations for limb cutting.
Nice informative video!
Thanks!
I guess you forgot to mention how heavy the power pruner is especially when it's extended, Oh yeah what's up with all the gear ???
I don't know the weight off hand. It's definitely balanced decently, so you can easily manage it. They make a 4' extension accessory, but I'm guessing it would start to get hard to handle at that length. ECHO gave me the gear, so I wore it in the video. Overall, this pruner sure beats going up on a ladder with a chainsaw.
Yes, it is very heavy and awkward, to use, for more than 5-minute periods; however, Husqvarna makes a very good support-harness-vest, that is meant to be used, with many garden tools, the Husqvarna XT Harness, $190. w/FreeShip... Cannot find anyone, doing yard-work, without it, in Sweden...
Great review. Enjoy all your details.
Thanks, Del!
Can you get anymore echo gear on .lol
Haha, what can I say, they're a great sponsor, keeping me safe.
When did echo start getting power pruners
At least 5 years ago that I know of.
Mark do you prefer the echo or stihl pole saw?
I've only run the Echo pole saw and really like how it works. I just used it the other day to cut a small tree that fell on my shed. I've watched someone run a Stihl pole saw a few times they do a nice job as well. Sorry I can't help any more than that.
@@MarkThomasBuilder echo is ,,20 times better. Than stihl .40 years tree guy
Myself, I’ve had issue from day one with my exact same Echo trying to die in a 90 degree vertical position. Been worked on under warranty 3 times. Warranty out now. No mechanic is going to run in real cutting situation long enough to get it to do it. Starts and runs fine otherwise. Worked on fuel pick up and carb?????
@@axeman33333 dang that sucks I got 6 echos saws I did have 1 acouple years ago do that it was the carburetor..they put a new one on it worked good
Cool
It's an awesome saw!
From day 1 new, chain oiler has always had major issue leaking when not used and now no oil hits bar. Echo PPT 2400. I'm good with tools, but nothing seems to work to get oil flowing to chain and see no visible issue. any ideas? Echo engines are bullet proof. but this oiler is a mess
My oil reservoir has a slight leak over time. I haven't tried to fix it, since it's a minor issue. I'm not sure about the oil flow issue. Here's the Echo support page. I thinks it will be helpful for fixing your problem: www.echo-usa.com/Support-Help
Great video, thanks for sharing and support help. TH-cam folks are great that hold many keys for life value success.
Thanks for sharing!
I found and fix oil leak. Echo 2400 oil tank has a pin hole with a one way air valve at bottom of tank. Cheap rubber valve and poor design, I blocked it off and put my own air valve at top of tank. Echo engines are excellent.
Thanks for the info. I'll have to take a close look at mine. It seems to have a small leak on occasion.
I thought you were taking the entire tree down with that thing? Or is that not going to happen with this saw?
It's a 12" bar and plenty of power.
Did the hat, shirt, and gloves come with it? In other words, how much did they pay you?
Yes they sent it for me to make a video with and no other payment. I just show actual footage of it going to work. It's an amazing saw that's taken care of some tree issues after storms. Much nicer than going up on a ladder.
I have a great appreciation for the Echo company. But in this case they did not do their homework. Let's make this easy -- look up the 3 Step cut in any good tree book, or online. This is not up to someone's training or feelings about pruning. This is the scientific method that informed foresters and professional arborists use. The point, like surgery on you, is to do what's best for the tree. To promote healing. And a good job.
Thanks for pointing out the 3 step cut. I looked it up and it makes sense.
He said the tree was dead, so there's no need to worry about proper pruning technique.
I could skip arm day at the gym if I get one of these beauties. Nice machine though.
True that! You can use it for military press on shoulder days!
Curls for the girls
how do u pull telescopuc tube out?
Yes, there's a twist know near the end which releases it to telescope out. It's a very simple process.
When things are given for free, it is seriously difficult to be truly honest with any review. As with most companies, they require signed papers that you are not going to show their product in a bad light. So this becomes a sales video and not a honest review.
I made this video as part of the ECHO ambassador program. ECHO wants to be the best in the industry, so they want real feedback in order to continually improve. I showed this pruner put through my tests and it passed. I made an update video last summer using this tool and it performed well. If something breaks, I show the customer service I get with a warranty claim. If I don't like the product from the beginning, I won't make a video review. I try to seek out the best tools out there, that's why I don't get too negative in my videos.
Ugh, I need to use my echo pole saw about twice a year, and it never starts. Never. I get it serviced by a professional, it works and the next time I need to use it.... nothing. I can keep pulling that chord till the cows come home, but won't start. When it works, it works well though.
Mine seems to get flooded and can be hard to start at times. It's been awhile since I've had the issue, but it seems like the only way it starts is by removing the air filter, put the choke on, use one hand to keep the throttle squeezed, and then try starting it. I bet it will start within 5-10 pulls.
Just proves operator error. I had same issue and i figured out it was me not the equipment. echo one of the most reliable brands on the market.
dude, ive wtache 4 videos and stoll havent seen u extend the pole.
everyone that buts this shoukd know how to use a chainsaw!!!!!!
Sorry if I didn't show how to extend it. I actually have it all the way extended at the 5:32 mark. In order to extend it, you twist a knob 3-4 turns and the saw telescopes out.
STIHL Pole Saw is Best.
STIHL Is Best.
I have all
my chainsaws Stihl and im Happy
One time i purchased Echo Trimmer brand new and Never again.
I mean is good first two month and after two months not good quality But stihl always same and power same.
This one has held up well for me. I've also rented a Stihl pole saw years ago and it worked great.
GET A STIHL..sorry caps lock glitched
I really did my home work when deciding to get the echo or stihl, and ended up finding more flaws and negative comments about the stihl. so went with the echo with the trimmer style handle instead of the D handle used in this video, and love it.
Erica Lopez: Hi Erica, Does Stihl have a telescoping long shaft model? I don't know if they still make the HT 131.
kakarot: I went with the Echo. It was purchased from Baileys around 1996, so it may be one of the original models. It was made by the old Power Pruner company, before they sold out to Echo. But it has the Echo engine. The two problems with this model were the oiler for the chain. Eventually I just got a whole new cutting head from an Echo dealer. Now it's better. The other thing seems to be carburation. Once the thing is warmed up and in operation it is good. But it takes sweat and effort to get it there. Therefore when that industry came out with smaller ones (Poulan, Craftsman) I got that for smaller jobs. Let me say at this time, if your research indicates that the problems with the Echo have been ironed out, then I would recommend it for purchase.
Stihl suck echo all day