I think in above animation 1st punch length should be more than 2nd punch so that punching at 1st station should take place at earliest. Bcoz we should avoid simultaneous punching to reduce the press capacity . Otherwise press capacity required will be high.
Never pilot off the part, also with only one pilot you lose the ability to keep the strip square. The die will never run reliable, you need pilots on the side of the strip. The tool would only need one more station
You forgot to mention that all dies are designed around a very specific feed length, and that feed has to remain consistent throughout the forming process. By changing the feed length, you can change the location of the hole in the washer in respect the washer itself.
hello friends, i want to learn this type to animation so in which software we can do die punch animation ,......is it possible in ANSYS....kindly suggest me thanks
This is very good question. I do not know the real reason why it is called a Die. But my Google search let me reach the following conclusion. Die is singular form of Dice. Alea iacta est ("The die is cast") is a Latin phrase attributed to Julius Caesar on January 10, 49 BC as he led his army across the River Rubicon in Northern Italy. With this step, he entered Italy at the head of his army in defiance of the Senate and began his long civil war against Pompey. The phrase is still used today in Italy (Il dado è tratto) to mean that events have passed a point of no return. Therefore in metal stamping, if a metal pass trough a die for stamping will never turn to its original form, in short "The die is cast".
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
I think in above animation 1st punch length should be more than 2nd punch so that punching at 1st station should take place at earliest. Bcoz we should avoid simultaneous punching to reduce the press capacity . Otherwise press capacity required will be high.
I'm from Sri Lanka, your idia is wonderful happy long life for you ,,. 'aauybowan'
travail excellent merci !
Tesekkurler, animasyon anlamama cok yardim etti.
Bro ...post a video about combination dies and design of dies
I would assume the advantage of this is less moving parts means less prone to failure
I think it is a good assumption.
It is common to make such kind of dies. I have made a lot of dies.
this washer won't be flat. needs to blank under pressure
But this type die's washer bend like a discspring washer
In this die after cutting washer bow
Never pilot off the part, also with only one pilot you lose the ability to keep the strip square. The die will never run reliable, you need pilots on the side of the strip. The tool would only need one more station
can you plzzz upload videos about combination and inverted dies ??? :-)
You forgot to mention that all dies are designed around a very specific feed length, and that feed has to remain consistent throughout the forming process. By changing the feed length, you can change the location of the hole in the washer in respect the washer itself.
Thank you for clarification.
Best video on this topic thank you.
I finally understand it. the animation is very good. it's almost impossible to understand from reading about it.
Thank you for your comment and visit to my channel. I appreciate it.
Super
Amazing
Plss upload any combination tool
Is tarah ki dies banana aam baat he ...ye Mene bhut banayi he..😃
Great video!
By the way, in which software this video was made?
Thanks, the software I use is Adobe Flash.
hello friends, i want to learn this type to animation so in which software we can do die punch animation ,......is it possible in ANSYS....kindly suggest me thanks
I use Adobe Flash for my animations. I do not have knowledge about ANSYS, so I can't answer your second question.
You can shear file flash of mold die ? Thanks !
will u pls help me with "combination die" too.... .... btw thank u for the ...videos..... those were very much help full .....
well explained !
@jeni edit
why is it called a die?
This is very good question. I do not know the real reason why it is called a Die. But my Google search let me reach the following conclusion.
Die is singular form of Dice. Alea iacta est ("The die is cast") is a Latin phrase attributed to Julius Caesar on January 10, 49 BC as he led his army across the River Rubicon in Northern Italy. With this step, he entered Italy at the head of his army in defiance of the Senate and began his long civil war against Pompey. The phrase is still used today in Italy (Il dado è tratto) to mean that events have passed a point of no return. Therefore in metal stamping, if a metal pass trough a die for stamping will never turn to its original form, in short "The die is cast".
Punch and dies are productions tools. ln TH-cam the fantastic and latest videos about punches and dies major machine.Students perform practicals
+Juni Satti Thank you for comment and support.
comment padhne aa gaya tu ...
Super
Super