As a Mechanical Engineer, I can say this is one of your best videos so far! And about a content that I havent seen covered in wood working channels! Thanks!
Just want to say I am finding your videos tremendously helpful. I am a novice mostly just learning in my retirement and you are super clear and concise. Thank you.
There is so much knowledge and experience packed into these 6+ minutes I wonder how many hours and days you needed to prepare and make this video. Even if I can't buy most of the products here in Germany (at least at reasonable prices, except WD-40) your information is valuable because you mentioned the important ingredients. Thank you very much again!
Awesome. Weird how hard it is to find the differences in one place. I'm restoring old toolbox i bought with old tools/wrenches etc; this explained EVERYTHING i've been looking for on other channels in 6 minutes to use after i clean them and my own tools. After wasting an hour even on manufacturers site. thanks man.
@@TrainingHandsAcademy ps funny, after i wrote this i went to home depot to get the liquid wrench (they dont carry, wtf) - a dude was sitting there staring at the 15 different types, so i gave him the summary from your video lol. I prob told him wrong thing but , hey. I did admit i had to google it and i was emasculated but confusing as shi so Im fine with it
Hi, I have watched this twice now, very good! Just want to makes sure I have this right, for the inside of a table saw, use a lithium white grease? What would you use for a lathe chuck? My concern is, both are very dusty, and don,t want build up. Thanks
Truly exemplary video...you should be proud and it should be more popular. Very helpful. Any thoughts on a degreasing product to strip off the wet lubricant before top coating?
I'm interested in what the best lube is for the acme threaded rods on a planer, the four posts that the head ride up and down on? There is a lot of dust and chips, of course, so should I be using a dry lube? I want to do some maintenance on my planer so any advice is greatly appreciated. Thank you!
Yes, I would use a dry lube. I also like to check that the infeed and outfeed tables are lined up (that everything is basically flat). I also like to use a wax on them as well to keep them slippery.
My power tool batteries stick in the power tool and almost need to be banged against my workbench to get out. The lock disengages but the battery will not slide out. Can I use a wax or spray oil? What would be best? I'd keep it away from the metal electrical connections so it's just plastic...
@@TrainingHandsAcademy yes. I think the kind in a tube would be best as it has a higher viscosity than spray. I’ll use that on the spindle and a dry lube on the “sliding bar”. Thanks again.
What about “Tool Bench Hardware Spray Lubricant”? I just bought a cart full at Dollar Tree, not expecting much and doesn’t have any information on it. Thanks in advance.
Check out Tsubaki Oil (Japanese Camellia Oil). The Japanese have been using it to protect their carbon steel knives and swords from rust for a long time.
i only use wd40 for a cheap Goo gone replacement and do so very carefully. neer use wd40 as a lubriCANT because it will work for the first very short while then stick around collcting dirt dust etc aking te original problem you were ryigh to wd40 away back but progressively WORSE.. edit: this is just my opinion. also GREAT VIDEO. props to uploader, scripterm presenter editor researcher. VERY TOP OTCH VIDEO EXAMPLE RIGHTT HERE! -signed an original yt user.. I'm OG (origioo geekeer:) remember the net BefORe we had http/html aka the web
Them: "Teflon in pans is not a problem as long as the surface doesn't get damaged." Also them: "Let's put Teflon in a spray and put it on stuff you touch a lot"
As a Mechanical Engineer, I can say this is one of your best videos so far! And about a content that I havent seen covered in wood working channels! Thanks!
Thank you Kauer! 👊
Just want to say I am finding your videos tremendously helpful. I am a novice mostly just learning in my retirement and you are super clear and concise. Thank you.
Thank you very much for the comment. Let me know if you have any questions as you watch more videos.
There is so much knowledge and experience packed into these 6+ minutes I wonder how many hours and days you needed to prepare and make this video. Even if I can't buy most of the products here in Germany (at least at reasonable prices, except WD-40) your information is valuable because you mentioned the important ingredients. Thank you very much again!
It is truly my pleasure Wolfgang. Thank you for being apart of this community!
Awesome. Weird how hard it is to find the differences in one place. I'm restoring old toolbox i bought with old tools/wrenches etc; this explained EVERYTHING i've been looking for on other channels in 6 minutes to use after i clean them and my own tools. After wasting an hour even on manufacturers site. thanks man.
Man, I'm glad you found this video!
@@TrainingHandsAcademy ps funny, after i wrote this i went to home depot to get the liquid wrench (they dont carry, wtf) - a dude was sitting there staring at the 15 different types, so i gave him the summary from your video lol. I prob told him wrong thing but , hey. I did admit i had to google it and i was emasculated but confusing as shi so Im fine with it
😂
That was very informative. I'm just getting started with woodworking as a hobby and had no idea there were so many options.
Glad it was helpful!
Great info Thanks ...Greetings from Europe (Slovakia)
Great video! I'm looking for a way to lubricate my plunge router to go down smoothly. Could you say the way you do it? Thanks!
Anyone of the dry lubricants would work great.
Josh, Another great video.....Thank you so much..... going on your amazon site now to order.
Thank you again for all your great questions... and keep them coming. It was absolutely my pleasure to make this video for you.
Thanks for the detailed and informative video. Any suggestion of a lubricant for a stiff on/off switch on an angle grinder?
Hi, I have watched this twice now, very good! Just want to makes sure I have this right, for the inside of a table saw, use a lithium white grease? What would you use for a lathe chuck? My concern is, both are very dusty, and don,t want build up. Thanks
Truly exemplary video...you should be proud and it should be more popular. Very helpful.
Any thoughts on a degreasing product to strip off the wet lubricant before top coating?
Thank you! I use Simple Green all purpose cleaner, works well!
Excellent explanation 👍👍👍👍
I think PTFE can be used for sawblades drillbits etc. as well. It’s supposed to be good for high temperature, high pressure applications.
What about grease for bearings and gear clusters?
Excellent informative video 👍🏿
can I use Wynns Silicone spray Lube on the plastic gears on my fan?meat slicer plastic gears?sewing machine?
I'm interested in what the best lube is for the acme threaded rods on a planer, the four posts that the head ride up and down on? There is a lot of dust and chips, of course, so should I be using a dry lube? I want to do some maintenance on my planer so any advice is greatly appreciated. Thank you!
Yes, I would use a dry lube. I also like to check that the infeed and outfeed tables are lined up (that everything is basically flat). I also like to use a wax on them as well to keep them slippery.
some good information, thanks
My power tool batteries stick in the power tool and almost need to be banged against my workbench to get out. The lock disengages but the battery will not slide out. Can I use a wax or spray oil? What would be best? I'd keep it away from the metal electrical connections so it's just plastic...
Hey there! To be honest, I'm not sure what you should use for that. I would maybe use the Teflon spray or the top coat spray.
What lubricant would you suggest I use on a bench vise? I’m restoring an old Dunlap.
I think I would lean towards using the Liquid Wrench Lithium Grease
@@TrainingHandsAcademy yes. I think the kind in a tube would be best as it has a higher viscosity than spray. I’ll use that on the spindle and a dry lube on the “sliding bar”. Thanks again.
Thanks man good job explaining
Definitely didn't expect to find that lubricants have something to do with woodworking. Automotive repair, sure. But this surprised me.
Thanks for the comment friend.
What do you think of Tri flow
Never tried it. You?
Great video. Thanks.
Holy smokes Glide Coat is expensive!
My used table saw cost less than that!
Crazy right?! Paste wax works good too.
What about “Tool Bench Hardware Spray Lubricant”? I just bought a cart full at Dollar Tree, not expecting much and doesn’t have any information on it. Thanks in advance.
at 4:09 you said dry bout you mean wet right?
yes
Check out Tsubaki Oil (Japanese Camellia Oil). The Japanese have been using it to protect their carbon steel knives and swords from rust for a long time.
Great info, thanks!!
Brother help me,😟
Please answer this is my module
Question:Give at least 5 persons why we need to put lubricants on our tools and equipment.
i only use wd40 for a cheap Goo gone replacement and do so very carefully. neer use wd40 as a lubriCANT because it will work for the first very short while then stick around collcting dirt dust etc aking te original problem you were ryigh to wd40 away back but progressively WORSE..
edit: this is just my opinion. also GREAT VIDEO. props to uploader, scripterm presenter editor researcher. VERY TOP OTCH VIDEO EXAMPLE RIGHTT HERE! -signed an original yt user.. I'm OG (origioo geekeer:) remember the net BefORe we had http/html aka the web
I find pledge works as well it wears off faster but it’s cheaper
Never heard that. Thanks for commenting!
How about beeswax?
I've never tried it... also not sure what type of residue it leaves behind.
Them: "Teflon in pans is not a problem as long as the surface doesn't get damaged."
Also them: "Let's put Teflon in a spray and put it on stuff you touch a lot"