V-Dipole 750V Trial

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • This is a 750V HF V-dipole antenna.
    Last weekend, we installed and tested it for the first time at Daebudo beach.
    I received too many signals from stations in Europe or the eastern United States, which were not usually heard at my home (Seoul, Central District).
    Aside from hearing signals that cannot be heard in downtown Seoul, it is a pity that many HAMs could not communicate because there is a limit to signals transmitted only by car battery power.
    If given the opportunity, DX communication with more HAMs would be possible if the antenna could be raised to a higher altitude and transmitted maximum power with sufficient power supply connected to a 220 V AC power source.
    The antenna is produced and sold by China's BG7PNV, which is sold by Aliexpress and can be found on my blog for more information.
    While purchasing this product from China, I told BG7PNV that I would try it and sell it in Korea if I liked it, but I don't know if many HAMs in Korea will be needed.
    If a Korean HAM need this one, you can buy it from Aliexpress, but if you want to buy it cheaper, you can contact me personally and find a way.
    Detailed information can be found on the blog below.
    blog.naver.com...
    이 제품은 750V HF V-다이폴 안테나입니다.
    지난 주말 대부도 바닷가에서 첫 설치 및 테스트를 했습니다.
    유럽이나 미국 동부의 지역에서 날아온 많은 신호를 수신했는데 이런 신호들은 평상시 우리 집(서울, 중부 지구)에서는 들리지 않는 신호들이었다.
    서울 도심에서 들을 수 없는 신호들을 듣는 것과는 별개로, 자동차 배터리 파워만으로 송신하는 신호에 한계가 있어서 많은 HAM들과 교신을 못한 것이 좀 아쉽다.
    기회가 된다면, 좀더 높은 고도로 안테나를 올리고 220V AC 전원에 연결된 충분한 전원 공급으로 최대의 파워를 송출 할 수 있다면 더 많은 HAM 들과 DX 교신을 할 수 있을 것이다.
    이 안테나는 중국의 BG7PNV이 제작해서 판매하고 있는데 aliexpress에서 판매하고 있고 자세한 정보는 아래 블로그에서 확인할 수 있다.
    이 제품을 중국에서 구매해 오면서 BG7PNV OM에게 내가 써 보고 좋으면 한국에서 많이 팔아주겠다고 말은 했지만 한국의 OM님들이 많이 필요할지는 모르겠다.
    blog.naver.com...
    구매대행
    smartstore.nav...

ความคิดเห็น • 30

  • @alvarogaitan2529
    @alvarogaitan2529 9 หลายเดือนก่อน +1

    Mr. Jongho Cha terrific job congratulations 73 from kb2uew

  • @the11metersd.x.channel.55
    @the11metersd.x.channel.55 ปีที่แล้ว +2

    Used this antenna for the last 3 years at my QTH on a 10m tower. Outstanding performance, and band coverage at the price point. 190USD I paid.
    I recommend this antenna for those on a budget .. Nothing to dislike quality construction and easy to setup..73s HS0ZOU.

    • @HL1QVH
      @HL1QVH  ปีที่แล้ว +1

      Thanks! Hope to meet on air, 73!

    • @the11metersd.x.channel.55
      @the11metersd.x.channel.55 ปีที่แล้ว +1

      @@HL1QVH Normally on 20m from 11.30 UTC. 73s

    • @marlonkoya7681
      @marlonkoya7681 4 หลายเดือนก่อน

      Hello! Nice video! Have you tried shortening the section C or the 40M element Using 2 holes and 1 hole? What are the SWRs? Hope to catch you on air. 73
      DW1PDP

  • @youtubeaccount931
    @youtubeaccount931 ปีที่แล้ว +1

    I like this antenna design, I make many contacts with people who use it. Nice beach location to do ham radio!

    • @HL1QVH
      @HL1QVH  ปีที่แล้ว +1

      Thank you!

  • @wonderwoman1046
    @wonderwoman1046 3 ปีที่แล้ว +2

    안테나 멋지다~
    바다, 일출도 굿!!

  • @alvarogaitan2529
    @alvarogaitan2529 9 หลายเดือนก่อน +1

    wow great job 73 from kb2uew

  • @jonthebru
    @jonthebru 2 ปีที่แล้ว +1

    That's cool, an interesting well done video. These antennas aren't very expensive.

  • @justinpark4847
    @justinpark4847 2 ปีที่แล้ว +2

    멋진 경치 너무 좋으네요 ㅎㅎ 750 다이폴 안테나도 너무 멋집니다 ㅎ

    • @HL1QVH
      @HL1QVH  2 ปีที่แล้ว

      감사합니다.^^

  • @ruvendraprasad9377
    @ruvendraprasad9377 ปีที่แล้ว

    I purchased this antenna directly from China recently, I find it's cheaper than other similar antennas. However due to limited horizontal space at my QTH, I opted to use only one leg of the antenna mounted as a vertical with only 2 radials of 2.5 meter in length. On 14.180 Mhz I can use it without antenna tuner, because the SWR is down to 1.0, I can also hear many stations which I could not with EFLW antenna. I am a low budget ham operator.

    • @HL1QVH
      @HL1QVH  ปีที่แล้ว

      Thanks for your comments, 73!

  • @ssubaihi
    @ssubaihi 2 ปีที่แล้ว +1

    Poor video of SWR monitor
    Wonderful review , Without background music thought would be better
    Good Antenna

  • @HL5FZG
    @HL5FZG 2 ปีที่แล้ว +2

    성능 좋으네요!
    크레이트사 제품과 차이가 바룬고정 및 엘리멘트 고정용 플라스틱이 없는것 같습니다.
    엘리멘트 벌리는 각도를 45도 정도로 면 더 좋은 듯 합니다

    • @JONGHO_CHA
      @JONGHO_CHA 2 ปีที่แล้ว

      감사합니다,

  • @HL1KKC
    @HL1KKC 3 ปีที่แล้ว +2

    유튜브 개국을 축하 드립니다.
    de HL1KKC 73

    • @HL1QVH
      @HL1QVH  3 ปีที่แล้ว +1

      감사합니다. 73!!

  • @HANDLENIGHTBOX
    @HANDLENIGHTBOX 2 ปีที่แล้ว +1

    멋져요 ^^

    • @HL1QVH
      @HL1QVH  2 ปีที่แล้ว

      감사합니다^^

  • @marlonkoya7681
    @marlonkoya7681 5 หลายเดือนก่อน

    Hello! Nice video! Have you tried shortening the section C or the 40M element Using 2 holes and 1 hole? What are the SWRs? Hope to catch you on air. 73
    DW1PDP

    • @JONGHO_CHA
      @JONGHO_CHA 2 หลายเดือนก่อน +1

      I am so sorry for late reply. I didn't tunning that C pole, just I used it with all three holes aligned. The SWR was under 1.3. Thanks!

  • @JulyFPV
    @JulyFPV 2 ปีที่แล้ว +1

    hello, i am interested in buying the same antenna. in the video I could not see well the bandwidths at 40M. Could you comment on them please. Thank you

    • @HL1QVH
      @HL1QVH  2 ปีที่แล้ว +1

      I losted the picture of NanoVNA at 7Mhz, there is translated manual & tuning method in my blog. blog.naver.com/uncle0mozart/222224215910
      Also SWR diagrams are in. I found more cheaper price one, links in my blog also.
      4. 7Mhz adjustment: Adjust the length of the C Pole 1880mm. Shorter length can change up to 7.080 Mhz and longer length can change up to 7.020 Mhz. Factory setting center frequency is set to 7.050Mhz.

    • @JulyFPV
      @JulyFPV 2 ปีที่แล้ว

      @@HL1QVH Thank you very much for your answer. I was reading your blog and my new question is: when the shortest length is 7.080Mhz, the SWR is 1.5 or 1? And if so, would it be 7.075 Mhz 1.5 - 7.080 Mhz 1.1 - 7.085 Mhz 1.5?
      Regards, CA6JQN

    • @HL1QVH
      @HL1QVH  2 ปีที่แล้ว +1

      @@JulyFPV Factory set center freq. is 7.050 , then SWR of 7.080 is about 1.3 in the spec. I was used default setting at the test of FT8, there was no concern about SWR.

    • @JulyFPV
      @JulyFPV 2 ปีที่แล้ว +1

      @@HL1QVH I'm stupid hahaha, I saw the SWR image wrong, I thought the bandwidth was 10khz instead of 100khz. Thank you for your answers!!!!!
      CA6JQN
      Julio from Chile

  • @라면-r7x
    @라면-r7x 2 ปีที่แล้ว +1

    사용하신 폴대 4미터는 어떤 제품인가요?

    • @HL1QVH
      @HL1QVH  2 ปีที่แล้ว

      네~~ 저도 아는 오엠님것 빌려서쓰고 있는데요 저도 탐나요. 그런데 어디 정크에서 사셨다고만 하셔서...