VW Passat Cluster Repair Part 1: Investigating No Signal from IMMO Antenna

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น •

  • @ecurepair
    @ecurepair  6 หลายเดือนก่อน +2

    I did some off camera experimenting. When I moved the original clusters immo data to donor, the donor clusters antenna also stopped working. This leads me to believe that it must be something to do with parts of the immobilizer data. I put the donor clusters info back as normal and antenna started working again. In the end, I transferred the original clusters CS, VIN & PIN to donor, then I adapted donor to ecu with VVDI2. Everything worked fine for me after that. Didnt get a chance to film it, Sorry for anyone waiting on a part 2.

  • @reitaparasram2871
    @reitaparasram2871 6 หลายเดือนก่อน +1

    The problem is after tried to add a key 100% , so I am thinking it s the flash file in the. MCU . If u solve please let me know

  • @johnbaker26
    @johnbaker26 6 หลายเดือนก่อน

    Can i ask what solder, flux, and wick you use? Thabks!

    • @ecurepair
      @ecurepair  6 หลายเดือนก่อน

      I use REL22 solder (lead free) or if leaded then Kester 63/37, Flux I use is kesters liquid flux 951 (no rosin) & 1544 (rosin)

    • @johnbaker26
      @johnbaker26 6 หลายเดือนก่อน +1

      Awesome thanks I'm going to be in the US briefly and know you know what's best so wanted to stock up love your videos thanks!

  • @bigo975
    @bigo975 7 หลายเดือนก่อน

    Where do u get your board circuit schematics from?

    • @ecurepair
      @ecurepair  7 หลายเดือนก่อน +1

      You have to create your own or make due with out. They are not released.

  • @DiamondAllie
    @DiamondAllie 6 หลายเดือนก่อน

    how does someone get in contact with you ?

    • @ecurepair
      @ecurepair  6 หลายเดือนก่อน

      Through my website is the easiest way to get my contact info, but its in my youtube profile as well. keyworks.us