Hey! thanks for the video. I have a doubt. Can i use arduino nano to program the esp32cam and have an adxl335 connected to nano which already has a program that reads the signals from adxl335 AT THE SAME TIME??? It would be really helpful if you could help me with this. Thankss
Hey i want some suggestions like i have its working perfectly so now i want to add it to my drone so i have to disconnect usb then from where i give power supply to nano and the camera module
You can simply connect Arduino Nano VCC Pin to +12v or +5v to the drone battery or power supply and Arduino Nano GND Pin to the Negative of your battery or flight controller.
put the comment sign // before the default camera model and remove the sign from this one "#define CAMERA_MODEL_AI_THINKER". If not, you'll have an error message.
Hey it was working 2 months ago perfectly even i commented on this video its working but now i m getting upload error that no serial data received whta i do
Everything done but now in serial monitor its showing camera init failed with error 0x105
Check the correct baudrate and frequency or band. In serial monitor
Thank you sooo muchh its working wowww🥹🥹🥹...ur new subscriber 😙
Thanks 😊♥️
Very nice! Keep it up
Thankyou ❤️😊
literally loved it ❣️
Bro ❤️❤️
I am not getting the board esp32 wover module
Refresh and update your Arduino IDE software then check it again
Thanks for the video! Can I please ask whether this esp32cam is capatible with the Arduino Nano ESP32 board?
Yes it is capable
@@GauravSharmaCreator Thanks for replying!
Great work! Keep it up ❤️🔥
Thankyou ❤️😊
Hey! thanks for the video. I have a doubt. Can i use arduino nano to program the esp32cam and have an adxl335 connected to nano which already has a program that reads the signals from adxl335 AT THE SAME TIME???
It would be really helpful if you could help me with this. Thankss
Yes you can use Arduino nano to program esp32cam module.
Ekdm jabrdast 😍
Thanks Bhai ❤️🥰
Mind blowing, keep it up
Thanks bro ❤️😊
I always get this error:
Failed to execute script 'esptool' due to unhandled exception!
Very frustrating
Check library and install correct borad
Thanks for the reply but both is fine - i can only ever get a few dots on connecting
Hey i want some suggestions like i have its working perfectly so now i want to add it to my drone so i have to disconnect usb then from where i give power supply to nano and the camera module
You can simply connect Arduino Nano VCC Pin to +12v or +5v to the drone battery or power supply and Arduino Nano GND Pin to the Negative of your battery or flight controller.
Really nice tutorial! Unfortunately, I cannot find the COM port on Mac...
Check your usb driver settings
Very helpful thx bro... keep it up....
Thanks Bhai ❤️😊
👍🏻❤️ very good
Amazing ♥️😍
Thankyou ❤️😊
Informative video ❤️
Thanks brother ❤️😊
Serial number paste karne par camera wala page found nahi ho raha hai please help me
Helpfull video 👍👍
Thankyou ❤️😊
Any driver need to be installed?
Yes
I like balz
Hmm
put the comment sign // before the default camera model and remove the sign from this one "#define CAMERA_MODEL_AI_THINKER". If not, you'll have an error message.
Good work♥👍
Thankyou ❤️😊
great
Thankyou ❤️😊
Hey it was working 2 months ago perfectly even i commented on this video its working but now i m getting upload error that no serial data received whta i do
Reset it and upload the code again
Reset the cam ? Like the small button on the back of esp32?
@@stickersqueak Yes if you have reset button on it
Other wise you have toh manually reset it by connecting jumper wire between RST and GND pin
@@GauravSharmaCreator same error 🥺
Great broo❤🔥🤟🏻
Thanks Bhai ❤️😊
Amazing ♥️😍
Thankyou ❤️😊
fd_forward.h" error .how can i solve this error
Check your library
This error general appear due toh connection issue or may be multiple library problem
Good
Thankyou ❤️😊
👍🏻👍🏻
Thanks ❤️
Can u explain this code
awesome 💕
Thanks Bhai ❤️😊
Please give me the library files link
Okay
Esp32-cam does not connect to Wi-fi
You have to select the correct esp32 wifi model name
❣️❣️
Thanks ❤️
😮😮😮
Kya hua Bhai 😳😅🤔
why ive got nothing in my serial lol
Check the correct port and band or frequency
@@GauravSharmaCreator now actually all works,trouble was with ico on gnd wire after loading sketch
@@strqqke 👍 okay