I just did my rear brakes yesterday. However, I couldn't turn the caliper piston. I ended up removing 2 small torx screws that holds the small motor to the caliper and manually turned the EPB mechanism (at the back of the caliper after the motor is removed) clockwise with a 7mm allen key and then used a C clamp to retract the piston. I found out this doesn't take much more effort. One tip, the brake hose made it difficult to remove the caliper at the first place. I found out that by losing the brake-hose-holding-clip on the trailing arm made the difference.
parfait, ça m'a bien aidé pour la manière de rentrer le piston qui rentre vraiment doucement quand on le tourne. Attention aussi aux ergots sur les plaquettes (donc il y a un sens) car cela sert pour le témoin d'usure..
у меня была версия sdrive30 258лс. проблем с надежностью не было. слабее брать не советую, так как со слабыми моторами обычно идет и бедная комплектация
I just did my rear brakes yesterday. However, I couldn't turn the caliper piston. I ended up removing 2 small torx screws that holds the small motor to the caliper and manually turned the EPB mechanism (at the back of the caliper after the motor is removed) clockwise with a 7mm allen key and then used a C clamp to retract the piston. I found out this doesn't take much more effort. One tip, the brake hose made it difficult to remove the caliper at the first place. I found out that by losing the brake-hose-holding-clip on the trailing arm made the difference.
Tried your method and it worked greatly! Thank you
You could always buy a wind back kit that does several cars.
Nice video. First one I've seen on this subject. Narration instead of music would have been helpful. Overall, excellent offering.
Good video, but had to turn sound off. Wish there was some narration.
you can't get better DIY advice than this - superb thanks
parfait, ça m'a bien aidé pour la manière de rentrer le piston qui rentre vraiment doucement quand on le tourne. Attention aussi aux ergots sur les plaquettes (donc il y a un sens) car cela sert pour le témoin d'usure..
Thanks for posting that, very helpful.
Thanks Vladimir - more Z4 maintenance videos please?
Hello, sorry, sold a car(
Great vid have you done one for the front pads?
Front pads are easy peazy. No motor or any of that stuff to contend with.
Great Video, learned a lot :-)
only 23k km? and needed new rear pads already??
Старина посоветуй если знаешь, ближе к лету думаю Z-ку брать, 89, года 12го, какой двигатель по надёжнее
у меня была версия sdrive30 258лс. проблем с надежностью не было. слабее брать не советую, так как со слабыми моторами обычно идет и бедная комплектация
+Vladimir Chudinov ок, спасибо большое и с Наступающим) ну а вообще доволен машиной как таковой? в крым покупаю, лето там длинное)
спасибо и тебя. машиной был очень доволен, сейчас скучаю. желаю удачной покупки
Great job
Did you find any issues after fitting? I've heard that the car has to learn the position of the new pads through the data cable.
after you turn ignition on, vehicle will adjust new pads position automatically
What kinda scary place is that to fix your brakes and leave yourself without a car to get away? 😂
Seriously though, good job, just about to do mines.
Would this be the same for a Z4 35is?
I guess there should be no difference
THANK YOU!!!!
Whats this fucking music mate?
Audio is crap. What's wrong with a commentary?