I have tried pretty much everything you covered in the video. The selection of sanding tools is quite personal. It really depend on the technic of sending. Sanding isn't that skill demanding for Gunpla models. These tools are for beginners only. It can make quite good results. You can phase out the tools piece by piece as your skill accumulate.
基本上，标注“模型专用”的工具除了水口钳都是坑钱的，都是其他领域工具换标加价起码一倍以上，常见的是美甲工具和文具。气泵请直接购买550W无油空压机，不含到香港的转运费大概只需要400CNY，若自己有动手能力，推荐直接用二手的冷柜压缩机改造。
很認同你的說法😂
I have tried pretty much everything you covered in the video. The selection of sanding tools is quite personal. It really depend on the technic of sending. Sanding isn't that skill demanding for Gunpla models. These tools are for beginners only. It can make quite good results. You can phase out the tools piece by piece as your skill accumulate.
師兄，個抽油箱好用嘛？仲健在嘛？
想知X2
@@hunfungcheng5591 我最後買咗浩盛e550，都好夠用
抽油箱係買大中細邊個size? 我想買番來改12V fans, 安全D。 龜泵都可以加氣缸50 蚊升級。 但最多21~24psi
師兄 我係買最細size
多謝分享✨👍🏻✨🙏🏻✨
準備入坑啦我~~介紹得好詳細👍加油!🦾
個氣泵靜止時開吓停吓可能係因為漏氣 我之前因為個水隔裂咗小小都有咁既問題 拆咗之後都冇事
開咗個泵之後可以留意吓個水隔有冇氣噴出嚟
係，個淘仔水隔d膠漏氣
對新手入坑非常實用能提供膠板噴油箱和氣泵的購買網址就太感激了。
check pm
喷油箱我们自己做，比市售的好用又便宜
支噴筆得一句廢廢地同垃圾，可唔可以講下點廢同垃圾法？
可以調教出油多少既範圍太細，噴少油既時候唔夠均衡，同埋拉筆個彈弓好快冇力
@@PROJECTGUNPLA 咁睇黎粗用都買唔過...
@@sintin9419 如果純粹拎黎噴下底灰, 唔噴陰影都ok既
我另一條片隻mg dynamic 成部都係用呢枝筆噴
喷笔还是只能买大牌货，虽然连岩田之类的大牌也是在浙江生产的，但是大牌的QC到位，性能和质量都有保障。
杂牌要么良莠不齐要么质量不稳定，可能每一批质量都不一样。
有無IG呀
thx @Alex Ng ，遲d會有 片未係好多 所以籌備中😂
你隻力天做 噴得好好
使
@@alexng5547 多謝支持，成隻都係用龜泵噴
我用手提泵 但係我噴水油想問 噴屬綠色 但係比例我唔識控制 請問要開幾多
知到大陸東西唔好買來做什麼！