the amount of free space in the drawers must be huge in the center area of the panel on the wall maybe a hand drill shelf you know a shelf for the bigger items
I can't tell you how much I appreciate that you work using very straightforward techniques in clever ways. Other woodworking channels discuss how to support the woodworking industry. You discuss woodworking.
I happened onto Matthias Wandel's videos last night while searching for some tool holder ideas on You Tube. What an incredible resource! He's a very talented, creative woodworking genius. Thank you so much for sharing your woodworking endeavors.
I did what u did about 20 months ago and it made a huge difference. I can see and grab tools easily. Before using pegboard I had to move tools to get to the tool. Another way is French cleet so u can move individual holders if need arises. Good skills I like your simple ways of making holders look up scale. I really like my pliers holder where bbn I have them from small to large instead of a drawer and had to shuffle stuff to find what I wanted. Have a friend retiring and building a shop and hope he sees these tool holders. With a new blank shop a guy could really lay stuff out to make life easier
Enjoyed the video. Functional without going overboard. As someone who is borderline OCD I admire your ability to line things up by eye and drill holes without worrying if they are half a degree out Most of all I love your total lack of respect for the health and safety nanny state. And you still have all your fingers!
Thanks a ton for this video! I've watched a few of your others as well, and watching your technique is a million times more useful than most advice I've ever been given.
I've made videos before and I know how difficult and time-consuming they can be. I have learned a great deal about woodworking from you over the years and I really appreciate your videos. Thanks, Mathias.
I like that you are not overly "fussy" about things that really don't matter. Much of what you do here could be easily adapted to a pegboard system (for those who already have it installed) by using plastic drywall inserts in the holes and then screwing the 'holders' shown here to the pegboard,
+RustyCas Or I could just screw it on between the holes. In which case, a pegboard with no holes would actually be better, and if it were plywood with no holes, that would be even better. Which, coincidentally, is what I actually used.
Thank you so much for this video, Matthias! This is a very timely video for me, since I have been debating on whether to use some pegboard that I already have for my tools or homemade hangers and hooks. You just inspired me to not use pegboard. Now I just have to find a good use for all the pegboard that I have. Maybe a downdraft table.
I don't know why the high speed parts are so satisfying to watch, but they are. :) Thank you for the ideas, I'll be doing some variation of this very soon.
I like your videos because they are objective and don't 'make things up'! I see channels on TH-cam that are a real display of expensive machines that use them to make simple jigs and waste an absurd amount of wood on their crazy projects that can be done with a simple saw and chisel!
Man! You make me feel lazy! Forget the woodworking, I mean all the time it takes to make videos! Kudos on all your efforts, Matt. (sorry for the informality, I just feel like I know you, seeing how I watch your stuff so often!)
Well done . I need to do this... just moved... tools are CHAOS , The stress caused by misplaced tools and wasted time ! As soon as your stressed , you lose focus , work is shit, accidents likely... great video ... simple ,to the point , problem SOLVED !
Молодец! Хорошие идеи и мастерское исполнение. Мне понравился держатель для штангенциркуля а так же нижний способ крепления полки. Попробуй сделать крепление для стелажа на рейке под 45° чтобы полки можно было менять местами . Спасибо за интересное видео
These were great. I needed something I could handle making w/o a lot if big machinery & even tho u have more machines than I do. I think I can make these work. I do need to figure out how to make a drill holder (&bits) but I think i can do it. Thank you
Matthias Wandel: WOW! I learned something new from you on this one: How to make a drill guide that will allow me to mimic the Kregg cabinet screw hole jig. Thank you! You're awesome.
Great video. For the past 40 years my tools have been in a VERY large tool box, it needed a fork lift to move it in and out of the panel van, fortunately it wasn't taken out all that often. Now I am retired and I just could not decide on a design and I didn't want to use a French cleat system. I'm going to adopt your idea. Simple, cheap (sort of) and a darn sight more pleasant on the eye. Thank Matthias
I really liked how you made your tool holder I recently made my tool holder collection will be uploading in a few days so excited great to see different variations
This is a satisfying DIY or woodworking project, obviously done with great skill, but I just made do with a pegboard and hooks. Granted I might not have been able to pack things together as densely as here, but overtime I've been able to easily re-arrange things as my needs have changed.
+MinuteMan Also most of my projects are *not* at my workbench, so I keep my 'must have' tools in a carryall - it then sits on or near the workbench when at home.
Easy and simple, and if they need to be changed or expanded you can just toss them out and make new ones. This is pretty much the system I want to use for my tool storage (smaller tools at least).
Making tool holders to go on the wall in my big garage workshop.
(tired of tools lying around the workbench)
really helpful! THANK YOU!
the amount of free space in the drawers must be huge in the center area of the panel on the wall maybe a hand drill shelf you know a shelf for the bigger items
The best video so far this year!!
soon finished with the 3D pantograph...
Birk swensen (Norway)
love the use of rough cut wood . T.U Cheers
The Pilot Penguin Maybe some punctuation?
I can't tell you how much I appreciate that you work using very straightforward techniques in clever ways. Other woodworking channels discuss how to support the woodworking industry. You discuss woodworking.
❤
I happened onto Matthias Wandel's videos last night while searching for some tool holder ideas on You Tube. What an incredible resource! He's a very talented, creative woodworking genius. Thank you so much for sharing your woodworking endeavors.
I am not a carpenter and never tried it before but this guy makes it fun and easy, he must love what he is doing.
Mathias is a master, so much efficiency of storage space, materials, and crazy quality in everything you do. Keep up the great work!
I did what u did about 20 months ago and it made a huge difference. I can see and grab tools easily. Before using pegboard I had to move tools to get to the tool.
Another way is French cleet so u can move individual holders if need arises. Good skills I like your simple ways of making holders look up scale.
I really like my pliers holder where bbn I have them from small to large instead of a drawer and had to shuffle stuff to find what I wanted. Have a friend retiring and building a shop and hope he sees these tool holders. With a new blank shop a guy could really lay stuff out to make life easier
Enjoyed the video. Functional without going overboard.
As someone who is borderline OCD I admire your ability to line things up by eye and drill holes without worrying if they are half a degree out
Most of all I love your total lack of respect for the health and safety nanny state.
And you still have all your fingers!
Thanks a ton for this video! I've watched a few of your others as well, and watching your technique is a million times more useful than most advice I've ever been given.
I've made videos before and I know how difficult and time-consuming they can be. I have learned a great deal about woodworking from you over the years and I really appreciate your videos. Thanks, Mathias.
I like that you are not overly "fussy" about things that really don't matter. Much of what you do here could be easily adapted to a pegboard system (for those who already have it installed) by using plastic drywall inserts in the holes and then screwing the 'holders' shown here to the pegboard,
+RustyCas Or I could just screw it on between the holes. In which case, a pegboard with no holes would actually be better, and if it were plywood with no holes, that would be even better. Which, coincidentally, is what I actually used.
Matthias how thick is the plywood?
I don't work with wood or anything I just realy enjoy watching your videos Matthias. You are very creative. Good job again.
what in woodworking is so therapeutic that feels so soothing, even if we are just watching it ?!
that's really cool, Matthias! =)
Es agradable saber que hay personas que organizan bien sus herramientas y su tiempo...Saludos desde Honduras
Thank you so much for this video, Matthias! This is a very timely video for me, since I have been debating on whether to use some pegboard that I already have for my tools or homemade hangers and hooks. You just inspired me to not use pegboard. Now I just have to find a good use for all the pegboard that I have. Maybe a downdraft table.
You're my hero, you make it simple but functional , thanks
I love how precise matthias is, then he goes "should be....THIS far away" and just eyeballs some pretty cool looking mounts.
Julius Jahn he measured them before it just didn't show because did you see how level they were
So many cool ideas, which I will steal when I decided to do the same thing. Can't wait for part 2.
This is one of my favorite wall tool holder set ups! awesome man
That walking drill press of yours makes me anxious, and things don't usually make me anxious. lol
Очень полезной видео! Своими руками сделанное- гораздо лучше, чем заводские перфопанели.
Thank you for explaining and demonstrating. And I like your your simple and common sense designs.
You make woodworking fun! Thank you Mathias.
Meu amigo, até agora o melhor vídeo de painel de ferramentas que já assisti, amazing, thanks from Brasil.
الله ينور عليك يا فنان ايه الحلاوه دي
The speed in which you accurately guesstimate the distances and spacing needed is extremely impressive and just a little disheartening.
I don't know why the high speed parts are so satisfying to watch, but they are. :)
Thank you for the ideas, I'll be doing some variation of this very soon.
I like your videos because they are objective and don't 'make things up'! I see channels on TH-cam that are a real display of expensive machines that use them to make simple jigs and waste an absurd amount of wood on their crazy projects that can be done with a simple saw and chisel!
رائع جدا،اعجبني كثيرا الشرح المفيد والمختصر وخاصة تسريع الفيديو في اماكن قد تسبب الملل.
شكرا جزيلا لك
All very nice! Watch your hands! You have gold!!!
Very nice set of tool organisers, thanks for sharing your ideas. I plan to use a few of your designs for my project, using French cleats.
Beautiful workshop, wonderfull skils and very professional film production. Gratulation.
really great video, no nonsense tool storage, lovely brackets there!
You make the best videos, i'm not even a wood worker.
Matthias Wandel - Thinking, so I don't have to.
True.
Gareth Martin I'm still thinking how can triangle be square
The big shop is coming along nicely. Clever speed square shelf.
I found this very helpful.....Production was excellent!
My favourite TH-cam channel. Always great work sir .
I just watched you build the exact same setup I did for my wall. Only two and a half years after. I guess great minds think alike.
Man! You make me feel lazy! Forget the woodworking, I mean all the time it takes to make videos! Kudos on all your efforts, Matt. (sorry for the informality, I just feel like I know you, seeing how I watch your stuff so often!)
Nice set up, Did you see Chris Pine Hammer shelf, would fit in perfect
That set of tools on your 1/4 inch of wood was so cool
Well done . I need to do this... just moved... tools are CHAOS , The stress caused by misplaced tools and wasted time ! As soon as your stressed , you lose focus , work is shit, accidents likely... great video ... simple ,to the point , problem SOLVED !
Gracias y felicitaciones por sus excelentes ideas y proyectos!!!
Красавчик! Очень аккуратно и красиво! Уважуха!!! 👍👍👍
If I only knew half of what this guy has forgotten I would be a better Finish Carpenter than what I am now.
Thanks Matthias.
This gave me a lot of ideas. Thanks!
great video--- glad to see your not a pegboard user,I like to make my own tool holders and racks I use plywood on my walls too
How your really good with your hands! These videos are made very well!
I saw different videos for making wooden Screw Driver Rack, Pillar stands etc, but this video is Superb. Great.
Wow love it. Low cost and and some what fast. I am going to do this in my shop. Thanks..
Молодец! Хорошие идеи и мастерское исполнение. Мне понравился держатель для штангенциркуля а так же нижний способ крепления полки. Попробуй сделать крепление для стелажа на рейке под 45° чтобы полки можно было менять местами . Спасибо за интересное видео
Good stuff. Succinct and to the point without over-talking it. Videography is very good.
Все что вы делаете - Супер!!! Whatever you do - Super !!!
These were great. I needed something I could handle making w/o a lot if big machinery & even tho u have more machines than I do. I think I can make these work. I do need to figure out how to make a drill holder (&bits) but I think i can do it. Thank you
Me encanta la carpintería gracias por sus ideas
I just use magnetic strip tool holders. Simple and versatile, can hold screwdrivers, wrenches, shears etc.
hello from the other side of the world, sir you are the best of the best.
Very inspiring. Thank you for this, Matthias.
Matthias Wandel: WOW! I learned something new from you on this one: How to make a drill guide that will allow me to mimic the Kregg cabinet screw hole jig. Thank you! You're awesome.
Great man Matthias Wandel , you are . Thanks sharing with us on youtube and have again great success !
Nice job Matthias, always a pleasure to see your take on things
Gran organizador de Herramientas.saludos desde 🇲🇽
You have some awesome ideas, great workmanship
congratulations and good luck with all your help.
You make it look so easy, thank you!
Excellent and very helpful ideas thanks. 🇨🇦
You sir, are a craftsman. Very creative too.
Nice arrangement, brilliant ideas.
Great ideas, when I get finished with my wall, I think I'll steal some of these ideas. It looks much better than peg board.
Wow nice job Mathew. Thank for the ideas
Great video. For the past 40 years my tools have been in a VERY large tool box, it needed a fork lift to move it in and out of the panel van, fortunately it wasn't taken out all that often. Now I am retired and I just could not decide on a design and I didn't want to use a French cleat system. I'm going to adopt your idea. Simple, cheap (sort of) and a darn sight more pleasant on the eye. Thank Matthias
love to see more idea's for organizing a workshop...untill soon Matthias.
I like your designs .. simple but tailored to fit nice !
Parabéns pelo trabalho, vc é um mestre nessa arte. Good job, congratulations my friend. Awesome.
Brilliant, great solutions to the cluttered bench top, TY
you always make the best vids ........hats off!
I really liked how you made your tool holder I recently made my tool holder collection will be uploading in a few days so excited great to see different variations
Nice work mi amigo
Bravissimo. Sei un artista
nice work like always...."te quedò muy bien...felicidades y gracias por tus ideas.....
Show de bola maravilhoso já vou deixando aquele mega joinha
Hey amigo, qué buen trabajo, te felicito, saludos desde Venezuela y colombia !!!
Great little ,loads of ideas there 👍
great solution for the pliers!!.. your video it's very helpful!..
Thanks for the ideas on shop organization. 👍
1:10 is an ancient wisdom of carpentry: "a hammered in screw always holds better than a screwed in nail" :)
Lol, this deserves more likes
One of the signs of the apocalypse: the Wandel pocket hold jig.
Just saying.
Great dexterity and vision
Muito bom. Parabéns! 👋👋
show parabens muito bom
E' formidabile, BRAVISSIMO.
Un'Idea GENIALE.
This is a satisfying DIY or woodworking project, obviously done with great skill, but I just made do with a pegboard and hooks. Granted I might not have been able to pack things together as densely as here, but overtime I've been able to easily re-arrange things as my needs have changed.
+MinuteMan Also most of my projects are *not* at my workbench, so I keep my 'must have' tools in a carryall - it then sits on or near the workbench when at home.
Nice..i like it.very simple but awesome..tq.
Thanks Matthias! You have giving some great ideas to finally get rid of my crappy peg board.
Love your talent 💕
Easy and simple, and if they need to be changed or expanded you can just toss them out and make new ones. This is pretty much the system I want to use for my tool storage (smaller tools at least).
Excellent ideas, thank you for sharing
Went to store to buy manufactured tool holders... couldn't find any... very helpful video!
brilliant as usual Matthias
Ești foarte organizat felicitari !!!!!