Nice to see the old girl put back into service. Thanks for leaving the pits. I think rust pits are part of an item's character and should never be completely removed.
@@ilkeromeroglu3543 yok teşekürler 😂😂😂😂bende süngü kolesiyonusu sandım hemen seni görünce
4 ปีที่แล้ว
Excellent! I think you did a good job. It kept the original state of the bayonet knife, it did not wear material more than just what was needed. Congratulations. 👏👏👏
Все просто замечательно, но лезвие надо было сваркой немного обработать, темляк ножа так же, видок совсем другой будет .Спасибо Вам Мастер за интересный показ своей работы.
I have that type of bayonet! My handle is wood and has the barrel ring, otherwise the design is almost identical 😊. I was disappointed you couldn't repair the mount parts or mechanism, but i understand you want original parts for it. Looks good ✨️🗡✨️👍
Interesting piece of warcraft. Too bad about the pitting on the blade, but true to quality of the metal, you were able to get a great edge anyway. Thanks for sharing this video with us.
That “heat sink” is also called a flash guard, and they can be found on eBay sometimes if you are looking for one. Nice restoration, I like how you managed to save the wood.
As always, wonderful work! And you never disappoint with new tricks and techniques. What material were the handle pieces? Are there materials that you wouldn't want to put into rust remover? I saw you filled the gaps in the heat sync with solder. Neat idea. Thank you for sharing that. I also find neighbors have wonderful timing... but I also noticed that they stopped once you started stabbing the cans... perhaps you left the door open so they could see that part. It's good to keep the neighbors scared! Thank you for the restoration, ideas and inspiration to take on our own projects
Thanks for your attention! I really appreciate it. Yes, of course, in this case, it was impossible to use electrolysis or other rough method of removal. There were a lot of deep holes. I tried to clean it as carefully as possible and restore it
Wow! I have one exactly like that. I am lucky it is in almost pristine condition with very little rust and no missing parts. Only mine has a small crack in the metal where it slides onto the rifle.
Send me the link when ur finished with it Plus these might lead you to the best restoration Dont remove the stamps Try to keep the old grips and skrews as much as posible Dont over polish it Make it the orginal.
А я в огороде нашла ножны от штык ножа маузер 98к. Кстати, в относительно, хорошем состоянии. Подскажите пожалуйста где их можно продать и по какой цене?
This is a great example of a imposible referbishment (because its not restored to how it was before becuase its imposible to do that) (dont try these on a bayonet that isnt as bad as this one)
Привет Алекс восстановление хорошее,но для полной комплектности и красоты не хватает кнопочки,и если переделывать винты крепления накладок,то антуражнее брать не под крест а под шлиц, чтоб как по родне смотрелось)) термопластину можно удлинить или заказать новодел готовый могу подсказать по запчастям где у кого и сколько по цене если интересно конечно же)) а так весьма миленько получилось!!!
@@ScrewsAndToolsШтыков я понимаю вы два делали, во всяком случае на видео на канале то что я нашел) а так по турецкому чтобы кнопку не переваривать и не срывать,надо винт калить надо до красна и несколько раз остужать как при закалке сначала в воде потом прокалка и в масло тогда точно не сорвется,и скручивать не собакой или пассатижами а зажимая в тисках кнопку и прокручивать сам штык,сам просто не одну так запорол,теперь по отработанной технологии )) чтоб потом просто зачистить,заворонить,смазать и вернуть на штатное место)) чтоб все по родне без заварок,так проще и времени на переделку детали тратиться меньше что ускоряет процесс,с удовольствием буду ждать новые ваши работы,всех благ!!!
"Реставрация" убогая. Убрана ржавчина, на этом все. Процесс заточки штыка говорит о том, что автор совершенно не вдупляет зачем и для чего был штык-нож. Они никогда не точились и не предназначались для нарезки чего-либо. В общем, типичный обыватель-профан. Итог: как была убитая вещь, так и осталась. Заслуженный дизлайк.
im very interesed in this video, because i have a rusty argentinian mauser bayonet made by solingen and i will try to "restore" it, i read that russian remove the original stamp of the firearms captured to germans in WW2 PS do you consider is a good idea fill the pits wit tig welding?
С точки зрения истории ценность ножа значительно снизилась, если даже не аннулировалась, но зато как инструмент он ещё поживёт. И да, подозреваю, что товарищ майор может им заинтересоваться, надо ГОСТы курить на эту тему.
Zdravstvuite. Eto deshevoe sredstvo dlia udalenie rjavchini v jeltoi butilke, nazivaetsia Yeetis. Est butilka s 550 ml b 2 L. Chase vsego prodaetsia v xoz. tovarax.
Nice to see the old girl put back into service. Thanks for leaving the pits. I think rust pits are part of an item's character and should never be completely removed.
Your English is getting better!
Right! Took the words right outta my mouth!
Wow! I like as you saved original view of bayonet. Like! ⚒
Great job nicely done ✔ 👏
Nice save
Это не реставрация-это издевательство!
Ну прям с языка сняли. Еще добавлю - убийца.
Цена предмета после реставрации резко упала. Но если делалось для хозяйства - пойдет как свинокол )
Very nice work. Really like these old bayonets. I've always thought they were cool. My dad had one mounted on the wall when I was a kid.
Great full ideas and good work
Nice work 👍
Hey naber sende süngü varmı??
@@thegoatmachinetdm1143 Sürmene kaması var lazımmı?
@@ilkeromeroglu3543 yok teşekürler 😂😂😂😂bende süngü kolesiyonusu sandım hemen seni görünce
Excellent! I think you did a good job. It kept the original state of the bayonet knife, it did not wear material more than just what was needed.
Congratulations. 👏👏👏
well done..more rusty to restore.
Wow, finally someone who actually restores stuff he found and not random junk he let rust in his shed
o really? The old screws should be unscrewed, not drilled out! Same for sharpening. Sharpening kills any value for the bayonet
Very nice 👍👍😎😎
Все просто замечательно, но лезвие надо было сваркой немного обработать, темляк ножа так же, видок совсем другой будет .Спасибо Вам Мастер за интересный показ своей работы.
I like this video top much
At first sight I throat rubbish but then you turned it into gold .
enjoy your videos much respect to you Sir . :)
I have that type of bayonet! My handle is wood and has the barrel ring, otherwise the design is almost identical 😊. I was disappointed you couldn't repair the mount parts or mechanism, but i understand you want original parts for it. Looks good ✨️🗡✨️👍
Good Restoration brother 👍👍
Thanks for uploading the restoration on the bayonet we saw on your Instagram. 👌🏻☕
Great work and amazing piece of history.
Interesting piece of warcraft. Too bad about the pitting on the blade, but true to quality of the metal, you were able to get a great edge anyway. Thanks for sharing this video with us.
Very nice. Frankly, it was irreparably damaged, but you did well to salvage what you did.
very enjoyfull always enjoy your videos,wow something that old can still do some damage please more videos stay safe and be well my friend
nice to see a true restoration. great work!
Amazing what you can find when digging in the vegetable garden. 😉 Saved! 🇦🇺👴🏻
K98. Great piece!
عمل متقن . احسنت 👏👏👏👍👍👍
Sen yetenekli bir ustasın
nice sweater
German bayonet Seitengewehr 84/98/98 from the period 1937-1943 with the Bakelite cladding handles!
Нельзя его точить: там толщина "режущей кромки" миллиметра два. И жалко что кнопки нет (((
...and your neighbours complain to you about noise!🧡
What a lethal scary looking thing that is!!
7:36 лет спик фром май харт итс спешал скрюс лук вери кринжова, как бы мейби стоило штырьки вставить и по классике расколотить их.
Перфэкт инглиш
That “heat sink” is also called a flash guard, and they can be found on eBay sometimes if you are looking for one. Nice restoration, I like how you managed to save the wood.
Here’s that link for a flash guard
Also the other parts lol
Yep, sometimes you have to let things be. Knowing when to say enough is enough is difficult at best 🤔👍
Ох этот русский акцент в английском языке. Вэри Фани мэн DDD
Wow this knife is a history! Sagol!
Great job well done great restoration enjoyed it
Great work!
Once again beautifully done. Explanation was great. Great restoration. Good job brother
Amazing👍👍👍
As always, wonderful work! And you never disappoint with new tricks and techniques.
What material were the handle pieces? Are there materials that you wouldn't want to put into rust remover?
I saw you filled the gaps in the heat sync with solder. Neat idea. Thank you for sharing that.
I also find neighbors have wonderful timing... but I also noticed that they stopped once you started stabbing the cans... perhaps you left the door open so they could see that part. It's good to keep the neighbors scared!
Thank you for the restoration, ideas and inspiration to take on our own projects
Thanks for your attention! I really appreciate it. Yes, of course, in this case, it was impossible to use electrolysis or other rough method of removal. There were a lot of deep holes. I tried to clean it as carefully as possible and restore it
2:45 bandage suddenly appears on index finger as he uses a razor knife blade.
Только ржавчину убрал, ну ты и слесарь
Nice work. I see it passed the strength and sharpness tests. All that was missing was the kill test. Noisy neighbors perhaps 🤣😬
Wow! I have one exactly like that. I am lucky it is in almost pristine condition with very little rust and no missing parts. Only mine has a small crack in the metal where it slides onto the rifle.
Mine is a German K98. 42aSW = 1942. Sadly the scabbard number does not match.
This is the best bayonet knife ever made.
Thank you for video. Good luck you
K98 was the best wwII rifle! Nice vid, keep it up)
Really good video.A friend of mine asked me if I can restore his bajonett.I have exactly the same!
Send me the link when ur finished with it
Plus these might lead you to the best restoration
Dont remove the stamps
Try to keep the old grips and skrews as much as posible
Dont over polish it
Make it the orginal.
Really good Job. Looking Nice. Thanx ........ ;0)) Greetings from Bavaria
Thank you, sir!
Nice job! But you better get that beautiful baking pan cleaned up before your wife sees it. LOL
I have the Same at home and it still new till now
А я в огороде нашла ножны от штык ножа маузер 98к. Кстати, в относительно, хорошем состоянии. Подскажите пожалуйста где их можно продать и по какой цене?
I thought, “what kind of wild cats do they have in Russia!” Then I noticed it was the cloth! Haha!
Угробил "реставрацией" раритет - вещь обесценилась в 2 ,а то и в 3 раза :(
Теперь эта вещь только для уголовного дела годится как холодное оружие. Испортил по полной программе.
Оно и до реставрации нихуя не стоило)
This is a great example of a imposible referbishment (because its not restored to how it was before becuase its imposible to do that)
(dont try these on a bayonet that isnt as bad as this one)
Phillips screws instead slotted screws?
Very nice!!!!
Nice job. I thought your neighbor was Godzilla there for a moment lol.
This knife was a life saver during world War II. I have servial, and thay all looking back at mother rushia! Don't fuck them up! History man!
Вери хот потейто)
😂сегодня смотрел этот ералаш😂😂😂
EBay usually has all that you would need.
Привет Алекс восстановление хорошее,но для полной комплектности и красоты не хватает кнопочки,и если переделывать винты крепления накладок,то антуражнее брать не под крест а под шлиц, чтоб как по родне смотрелось)) термопластину можно удлинить или заказать новодел готовый могу подсказать по запчастям где у кого и сколько по цене если интересно конечно же)) а так весьма миленько получилось!!!
Привет, это старая реставрация я тогда еще много нет понимал и не знал) Ну учимся со временем
@@ScrewsAndToolsШтыков я понимаю вы два делали, во всяком случае на видео на канале то что я нашел) а так по турецкому чтобы кнопку не переваривать и не срывать,надо винт калить надо до красна и несколько раз остужать как при закалке сначала в воде потом прокалка и в масло тогда точно не сорвется,и скручивать не собакой или пассатижами а зажимая в тисках кнопку и прокручивать сам штык,сам просто не одну так запорол,теперь по отработанной технологии )) чтоб потом просто зачистить,заворонить,смазать и вернуть на штатное место)) чтоб все по родне без заварок,так проще и времени на переделку детали тратиться меньше что ускоряет процесс,с удовольствием буду ждать новые ваши работы,всех благ!!!
İf you have boiled it instead of cleaning it out it wouldn't have that many pittings and have a nice blue finish on it
Термопланку проще было бы купить реплику... или, если в похожем на штык состоянии, еще дешевле была бы оригинальная
Well you made the best out of it! Amazing how the handles resist the times! Are these the 'bakelite' kind or the early hard plastic??
Yes, sir I am also extremely surprised. Because bakelite look like new.
Холоднячок 👍
Nice!! I like it.
Молодец хорошая работа.
Не подскажете общую длину и клинка?
Zdravstvuite, konechno. Obshaia dlina - 27cm, dlina klinka - 23,6.
@@ScrewsAndTools 3.4 см длина рукоятки?)Опечатка?
@@АлександрКулагин-э1ф 13,4 dlina rukoiatki. obshaia 37, opechatka.
@@ScrewsAndTools Спасибо.
"Реставрация" убогая. Убрана ржавчина, на этом все.
Процесс заточки штыка говорит о том, что автор совершенно не вдупляет зачем и для чего был штык-нож. Они никогда не точились и не предназначались для нарезки чего-либо. В общем, типичный обыватель-профан.
Итог: как была убитая вещь, так и осталась. Заслуженный дизлайк.
Согласен, сделал хуету полную, даже ручку деревянную не выточил новую, мог бы заполировать до надлежащего вида
Я вас прошу говорите на своём родном языке. Ну не в обиду но стремно слушать ваш английский. Работа сама класс 👍
Pero eso es un artículo de colección
Мамкин, всратый реставратор!
В чём разница? Почистил!?
Вот уже такой комментарий вижу на видео, а что он должен был сделать.
Nice
ШН не точятся так то!!!
Я сегодня такой же реставрирую, хрюшек колот!
Muito bom!
Isn’t that a spy that does laundry? Cleaning Agent
👍
Это не реставрация, это убийство коллекционного материала
Amazing!
I got lucky mine is in mint condition
Немецкий штык нож дед такой же с войны привёз как трофей потом коров кололи им очень классный был!
Это не реставрация а чистка от ржавчины(((((
👏👏👏👏
im very interesed in this video, because i have a rusty argentinian mauser bayonet made by solingen and i will try to "restore" it, i read that russian remove the original stamp of the firearms captured to germans in WW2
PS do you consider is a good idea fill the pits wit tig welding?
I didn't use welding to fill the holes. You can damage the material and spoil the historical thing. I don't recommend it.
@@ScrewsAndTools thanks
С точки зрения истории ценность ножа значительно снизилась, если даже не аннулировалась, но зато как инструмент он ещё поживёт. И да, подозреваю, что товарищ майор может им заинтересоваться, надо ГОСТы курить на эту тему.
👍👍👍👍👍👍
Это вообще огонь здорова спасибо большое было полезно
Looks like Wehrmacht one.
К98 не был заточен!
Нашего человека всегда раскроет акцент
Железо хорошее .
Where are u from mate?
Как испортить вещь? Посмотри этот ролик.
Доброго времени суток. Подскажите что за состав для удаления ржавчины вы используйте?
Zdravstvuite. Eto deshevoe sredstvo dlia udalenie rjavchini v jeltoi butilke, nazivaetsia Yeetis. Est butilka s 550 ml b 2 L. Chase vsego prodaetsia v xoz. tovarax.
Baioneta?
Меня бы жена убила, узнав, что я в кухонной раковине чищу штык нож к карабину маузер.
Видео называется угадай страну.