As someone who only uses wildfire and size 12 john james needles for everything you do need to flatten the end down to thread the needle but no issues with any of it. Love this bracelet!
I'm sure glad I found you. I'm enjoying your tutorials so much. I love all the added touches. I'm doing mine in a matte galvanized saffron Toho bead and blue AB Zircon Swarovski crystals.
I haven't been beading for a while, but I seem to be getting my interest back, and watching your videos has helped with that. I happened to see this on the list... I almost feel like I have to make this one now. Perfect name and symbolism for 2020, I think. You were ahead of the times. :)
Glad you are getting back to your beading🌻 I named this bracelet after the Sun’s corona! A beautiful sight and life giving. Who knew what would happen 🤷♀️🤷♀️🤷♀️
I use one thing for beading, sewing, murals, etc. the very most......painters tape. Been doing all sorts of stuff for 60 years and when they came out with that I grabbed it up for temporary any thing. It's great for marking margins on you sewing machine. Straight edges on a painting. Making dolls. But what I have found is beading it seems to work incredibly well. When I was teaching my granddaughter how to bead I gave her a roll for holding strings or sections of beads temporarily. She uses it all the time. The knot in this project could be held in place for a beginner till they get the hang of holding it with thumb and for finger. Learning beading is tense and that allows the student to concentrate on what they are doing until they learn it. Not trying to be a know it all. Just a suggestion.
Love this design. To me it screams simple elegance. Anxious to get 1 made for myself. Gotta dig out my 8/0's and something 4mm to go with them. I also have some gorgeous box clasps in my shopping cart with a fave supplier. (Just waiting for next billing cycle on my CC acct. ha ha) Thanks for the great tutorial!
Another beauty! All I can say is thank you, now I go to sleep and dream about how much fun I'll have making this bracelet and the the matching ring. Great!
Oh Stephanie you are so cute and funny and sweet! And TALENTED!! Another wonderful video and I love this bracelet. The whole corona set is gorgeous!! I made a similar knitted bracelet using 2mm pearls in herring bone and attached them thru one of the split side holes. Very similar BUT I love this one!! TY TY TY...!!!
As usual a beautiful design. I’m not sure if I’m the only one not getting this but I wasn’t sure how many beads to start with. I figured if the bracelet is 7 inches and the beaded portion is 6 inches (with an inch for clasp) and you said to add another 1-1 1/4 inch to each side, I should make it about 7 inches. So folded in half it would be 3 1/2 inches. So at 13 beads per inch I add 91 beads. Is that correct or am I completely off? Thank you again for a beautiful design!
+Louanne Fournier You’re right on track Louanne😊 Hold the knotted piece around your wrist to make sure your fit is good. The numbers are good but how it looks around your wrist is better. There is room for adjustment by loosening or tightening the knot.
So what happens when you make the bracelet too short, any way to add or just find someone with small wrists? It is 5.5 inches before I add the clasps. Thank you, I love this design.
I use wildfire with size 12 needles all the time. You just have to smash the end of the thread between a pair of flatnose pliers. The thread is round so it doesn't fit well through the oblong eye of the needle. if you smash it down it fits well.
I sometimes do that too. However, I do find that it can sometimes cause the thread to bend or curl a little bit where as using the pliers keeps it nice and straight. That being said, either method will help get that thread through the needle.
I’m in love with all your design Stephanie 😍😍😍😍 I’m so involved beading now, and I can’t wait to make all of your designs. Do you happen to have a book authored by you? I would totally buy it
Hi Stephanie, I love the look of this knotted bracelet. I'm wondering do you think it could be made with 4 mm rondelles instead of the bicones which I have a lot of??? Thank you, can't wait to give it a try. I love all your patterns and the way you teach!!
Thank you 🙏 I am going to re visit this tutorial in the future. I think it can be improved and made a little easier to follow. I’m sure it can be adapted to use other beads as well.
This is so, so pretty! You have awesome taste! Lovely done!!! Thank you very much for explaining, for me was very interesting to watch how you made it!
thanks for this new beautiful tutorial, it will be my next project, I would to do a set with the "corona ring", I done some of these rings and I cleaned a little in my bead rubbish drawer!
Stephanie this is soooooo cute I can't wait to make lots of these. I was thinking on the top of the not it would be fancy to put some small rose montees I might try it when I get this cast off. And what is the ring on ur left hand
Rene Wilson Thank you Rene 🙏🌻😃Love the montee idea! The ring on my left hand is the Crystal Bling Ring on my TH-cam channel. I have arranged my videos in playlists by category so it will be easy to find. Sending you the bead luv ❤️💜🌸
Thanks very much for the tutorial. I really like the style and wanna make it. Funny question: can I use delicas for this bracelet or it won't look so pretty as the seed beads? Thanks
Hi Stephanie! I bought the green Wildfire thread a while ago so it would be less visible and as I was beading, the color stripped off! Haven't used it since, but now, so many beaders are using it, I'm wondering if I just got a defective roll. I guess if no one else is having this problem, it was just me! 😕. By the way I contacted Hillary to order a mat. She's super nice!! Thanks for the tip! 😊
+Anna Centanni I had that happen once when my needle eye was too small for the thread. The needle scraped the top layer. I use a size 10 or 11 Pony beading needle with Wildfire. I use 6lb Fireline with a size 12. I love RingBerries mats! Super colors and quality. Hillary is great🌺
Anna Centanni, I do not know where you purchased the thread, however, you can tell them what happened and they should send you a replacement. I have had my Fireline replaced from the manufacturers themselves. I hope that this helps.
This looks very similar to Jill Wiseman's "Forever Tango" bracelet. Was she your inspiration? It's always interesting to see how beaders modify existing designs to create new pieces.
I've watched all of your Corona videos, and I seem to be the only one who can't do this. Do you have any tips for keeping correct tension, so that the columns are even? I haven't gotten past the first strand, because it comes out wonky.
Can I ask e where you get the bronze seed beads thatyou use at. Could you please post a link? I would love to make some of projects.your the best in you tube. A Your voice is soothing.ty for sharing your talent with us...
Should I measure the wrist size of the person? She has little wrists. If so, how much longer than the wrist circumference should the initial square beaded sections be?
Uaau I've discover you just now and I'm in schock!!! ... I love your work!!... you have an incredible hands!!!... Thanks for learn us.... A lots of Thanks ... kisses from Spain 😚💖💕
Hola! Muy linda pulsera, me encantan sus trabajos, me encantaría si también los materiales los escribiera al español. Muchas gracias y felicitaciones! Saludos desde chile :)
Stephanie,I tried reading through the comments to be sure I hadn't missed the answer to this question: what is the color of the 8/0s in the bracelet with the red bicones? Thanks
Brenda Classen yea I'm sure you can as long as they're 4mm. I've done many of Steph's projects and I did her regular Corona bracelet and used 4mm pearls instead, it came out beautiful. So I'm sure you can use fire polish, pearls, bicones, rounds, as long as it's 4mm. Just a little help for both you and Steph. She's my favorite bead teacher.
Brenda Classen Yes as emanuel said. Choose your clasp and any 4mm should do. A bangle would require a different pattern as this is a flat bracelet that wouldn’t roll on the wrist very easily. Good idea though 🙏🌻😃
Where do you get the box clasps? Thanks so much for all your tutorials. I'm just getting back into beading and can't wait to make some of your beautiful pieces. Sandi K.
Sandi K. Thank you Sandi 🙏🌻😃 Glad you are coming back to the craft! The box clasp is from Firemountain Gems but I think you could find it on Etsy or other bead websites as well.
Good Morning, I would like to know if you could make a knot corona ring?! I have a hippie daughter who loves knot style rings and I can see the knot bracelet and the knot ring as a set. Thank you.
+StoneStoat Yes, I’m working on a necklace design. You can extend it as is for a choker but I’m not sure it would lay correctly for a longer necklace as it is right now.
+rose gaither Thank you rose🌺 Wildfire is a thermally fused beading thread made by Beadalon. It comes in a few diameters and lb weights. I use the .006 inch 0.15 diameter in Black for most beading projects. Check out Beadalon’s website for more info. The best thing about it is the color doesn’t come off on my fingers🌻 It’s alsoa bit stiffer than Fireline. I still use Fireline as well.
+Domesticdiva10 The Wildfire I use is .006 and .15 diameter. Go to the beadalon website to see other sizes and colors. Most bead websites have Wildfire as well. Craft stores such as Michael’s, Joann etc might also have it.
patty Welsh You mean the thread? There are about 13 - 8/0 seed beads to an inch. Multiply 13x the number of inches of your bracelet minus about an inch for the clasp. Add about 10-15 extra beads to each thread to accommodate the knot. That being said, you must also hold it around your wrist as you sew to fine tune the fit. I hope this helps😃
I might redo this video to make it easier but until then, this is what i did. I used a measurement not the amount of beads to start. So you'll use your bracelet size and add about 1 1/4 inches to accommodate the knot in the center. You are going to fold each of pieces over and knot them together. I explain it in the beginning of the video. So if my bracelet size is 7 inches with a clasp (6 inches of beading and 1 inch for clasp), I'd make two pieces 6 inches long. Add about an inch or 1 1/2 inches to each piece to accommodate the knot. Folded over and knotted you should have close to six inches. The clasp adds the rest.
Hi Steff, Favor to ask, Could you please show how you make the bangle that is made with herringbone stitch where 4- Size 8 beads are used ,then there is Size 10 beads are 2-3-4 beads gradually added to two sides then there is the decrease of 2-3-4 beads on each side there is no twist to this bangle. Show the twist in a bangle would be awesome also. Your tutorials are so fantastically well explained also you don't bead like a mad woman trying to avoid from making a part 2 video lol, Ha Ha. I just made that saying up :) Part 2's are okay with me but my beads fly around trying to keep up. Yes there's the speed control but really watching a well explained video hearing a slow-moe voice and falling asleep with a needle stuck in your finger. To funny of a thought lol...~~~ :)
No. I've looked have not seen one yet on your tutorial page here. It may help if I told you the full name lol. Tubular herringbone 4-bead's used in the making the bangle. Work the 4- bead's for about 4 row's then you start 2 splits one on each side going around adding smaller beads in split of each side as you go around.
I don’t know this pattern Cindy. You can send me a pic on my Facebook page and I’ll see if I know the designer. Http://www.Facebook.com/BronzeponyBeadedJewelry
Selam Stepfeni, bilmiyorum ismini doğru yazabildimmi ? Ancak bu güzel tasarimlarini, butun insanlara hem eğitim hemde çok severek yaptiğini gösteren bu nazik gönüllüģune hem çok teşekkur ediyorum, hemde çok değerli ve ćok asil buluyorum. , TIPKI BU ÖZEL TASARIMLARIN GIBI, SANA ÖZEL TEŞEKKUR EDIYORUM... SO LAT ME TRAY TO WRITE IN INGLISH LANGUACE AS TURKS WOMAN STEPFENI.. YES I WILL . . LATE ME SHOW YOU MY LOVELY INTERESSED AND TO TANKS, FOR BE A WOMAN SHEAR , TO YOUR AND YOUR BEUTIFUL ❤ OBJECTS JUST 💯 ❤💃. TANK YOU IN THE NAME OFF BEUTIFJLL WOMANS TO, AND TO BEING A WOMANS ART'S TO
As someone who only uses wildfire and size 12 john james needles for everything you do need to flatten the end down to thread the needle but no issues with any of it. Love this bracelet!
I'm sure glad I found you. I'm enjoying your tutorials so much. I love all the added touches. I'm doing mine in a matte galvanized saffron Toho bead and blue AB Zircon Swarovski crystals.
Just finished making this bracelet. Easy to follow tutorial, and as always, beautiful designs. Thank you Stephanie! 💜 from California
+Macayla Leyden Thank you so much Macayla 🙏🌻❤️ Sending healing/loving thoughts to you and your fellow Californians so devastated by the wildfires😍🙏
I haven't been beading for a while, but I seem to be getting my interest back, and watching your videos has helped with that. I happened to see this on the list... I almost feel like I have to make this one now. Perfect name and symbolism for 2020, I think. You were ahead of the times. :)
Glad you are getting back to your beading🌻 I named this bracelet after the Sun’s corona! A beautiful sight and life giving. Who knew what would happen 🤷♀️🤷♀️🤷♀️
I use one thing for beading, sewing, murals, etc. the very most......painters tape. Been doing all sorts of stuff for 60 years and when they came out with that I grabbed it up for temporary any thing. It's great for marking margins on you sewing machine. Straight edges on a painting. Making dolls. But what I have found is beading it seems to work incredibly well. When I was teaching my granddaughter how to bead I gave her a roll for holding strings or sections of beads temporarily. She uses it all the time. The knot in this project could be held in place for a beginner till they get the hang of holding it with thumb and for finger. Learning beading is tense and that allows the student to concentrate on what they are doing until they learn it. Not trying to be a know it all. Just a suggestion.
Grazie.
Beautiful and elegant as all the jewelry pieces you design.
סימה מור קנדלקר Thank you so much 🙏🌻😃
Love this bracelet. Love all your tutorials!! Thank you for making these.
+Dianne Bolognani Thank you Dianne 😊🌻🙏
Love this design. To me it screams simple elegance. Anxious to get 1 made for myself. Gotta dig out my 8/0's and something 4mm to go with them. I also have some gorgeous box clasps in my shopping cart with a fave supplier. (Just waiting for next billing cycle on my CC acct. ha ha) Thanks for the great tutorial!
Love this bracelet , can’t wait to try it! Thanks Stephanie. Xxx
+Maggie R You’re most welcome 🙏
Очень просто, результат отличный!!!
OMGOODNESS! That is stunning! Absolutely stunning! TFS your talent xxx
+Faye Hadfield Thank you so much 😊 My pleasure to share with you 🌺
OH GORGEOUS! As usual...I love every piece of this bracelet!!!!
+Teresa Fernbacher Thank you (I haven’t forgotten you ring 😆😉😂 )
Lovely bracelet, will give it a go. The ring on your left hand looks nice also.
Thank you Marilyn 💖❤️🌻
So pretty. You do the BEST tutorials...!!
Another beauty! All I can say is thank you, now I go to sleep and dream about how much fun I'll have making this bracelet and the the matching ring. Great!
Thank you yolanda🌻😊🙏 Sweet dreams ☀️
You deserve more than this! You are very special to me, you are an inspiration!
Maria Roa Thank you do much Maria 🙏🌻😃 You are so very kind!
Me encanta todo tu trabajo, eres excelente!! Gracias por compartir, un abrazo desde México
MUCHAS GRACIAS POR SUS TUTORIALES, SON FACILES DE REALIZAR. QUE DIOS LA BENDIGA.
I love this bracelet Stephanie! You are such an awesome teacher. Thanks so much for sharing all your creativity with us. Hugs...Annie
Thank you so much Ann :)
Hola Steffi! This is so beautiful!! I love it 😍 You are my favorite TH-camr ever!!!! God bless you🙏
Veronik Thank you do much Veronik 🙏🌻😃You’re so sweet!
Veronik j
Oh Stephanie you are so cute and funny and sweet! And TALENTED!! Another wonderful video and I love this bracelet. The whole corona set is gorgeous!! I made a similar knitted bracelet using 2mm pearls in herring bone and attached them thru one of the split side holes. Very similar BUT I love this one!! TY TY TY...!!!
+Susan Chamblee Thank you so much Susan 🙏🌻😊 You are so kind. Your bracelet sounds beautiful 🌺
Love,Love,Love these. I know what I will be making for Christmas gifts!😍
Jackie Petrie Cool😎😀🎄🎄🎄
I love all your work, me encantan todos tus trabajos, gracias por compartirlos, nos enseñas muy bien, saludos desde México🌷
Guadalupe Peña Thank you so much 😊 🌻🙏
As usual a beautiful design. I’m not sure if I’m the only one not getting this but I wasn’t sure how many beads to start with. I figured if the bracelet is 7 inches and the beaded portion is 6 inches (with an inch for clasp) and you said to add another 1-1 1/4 inch to each side, I should make it about 7 inches. So folded in half it would be 3 1/2 inches. So at 13 beads per inch I add 91 beads. Is that correct or am I completely off? Thank you again for a beautiful design!
+Louanne Fournier You’re right on track Louanne😊 Hold the knotted piece around your wrist to make sure your fit is good. The numbers are good but how it looks around your wrist is better. There is room for adjustment by loosening or tightening the knot.
So what happens when you make the bracelet too short, any way to add or just find someone with small wrists? It is 5.5 inches before I add the clasps. Thank you, I love this design.
They are all Beautiful! Good video! Thank You!
I use wildfire with size 12 needles all the time. You just have to smash the end of the thread between a pair of flatnose pliers. The thread is round so it doesn't fit well through the oblong eye of the needle. if you smash it down it fits well.
+VirgoMoon9675 Yes I use a flatnose as well. Could be my needles have a particularly small eyes 🌻😊
VirgoMoon9675 I always run the tip of the thread through my fingernails!!
I sometimes do that too. However, I do find that it can sometimes cause the thread to bend or curl a little bit where as using the pliers keeps it nice and straight. That being said, either method will help get that thread through the needle.
Pretty,pretty! Can't wait to make one like this,tnx
Found masking tape works well to hold ends even.
تحية طيبة وبعد..
لا أتوقف عن مشاهدة وتطبيق أعمالك الرائعة جدا، أنت فنانة محترفة ...، وضحكتك ظريفة 🤗، سلمت يداك وشكرا لك 😘. Lebanon
So I now have to make a trillion of these beauties! Thanks so very much 😀🇬🇧
Спасибо большое! Колечки тоже красивые.
Thank you 🙏
I’m in love with all your design Stephanie 😍😍😍😍 I’m so involved beading now, and I can’t wait to make all of your designs. Do you happen to have a book authored by you? I would totally buy it
Thank you so much 😊 No, I don’t have a book. Would be nice lol 😂
Love it Steph. Always great work
emanuel serrano Thank you 🙏🌻😃
Hi Stephanie, I love the look of this knotted bracelet. I'm wondering do you think it could be made with 4 mm rondelles instead of the bicones which I have a lot of??? Thank you, can't wait to give it a try. I love all your patterns and the way you teach!!
Thank you 🙏 I am going to re visit this tutorial in the future. I think it can be improved and made a little easier to follow. I’m sure it can be adapted to use other beads as well.
This is so, so pretty! You have awesome taste! Lovely done!!! Thank you very much for explaining, for me was very interesting to watch how you made it!
Roses1401 Thank you so much! It was fun to design this piece🙏🌻😃
Another Fantastic tutorial!!! It's just SO pretty!
+Robina Owens Thank you so much sweet lady 🌻😊🙏
thanks for this new beautiful tutorial, it will be my next project, I would to do a set with the "corona ring", I done some of these rings and I cleaned a little in my bead rubbish drawer!
Haha a good stash bracelet and ring :) My pleasure to share this with you!
Beautiful once again you did it very very pretty..
+Karuna Shetty Thank you sweet Karuna 🙏
Stephanie this is soooooo cute I can't wait to make lots of these. I was thinking on the top of the not it would be fancy to put some small rose montees I might try it when I get this cast off. And what is the ring on ur left hand
Rene Wilson Thank you Rene 🙏🌻😃Love the montee idea! The ring on my left hand is the Crystal Bling Ring on my TH-cam channel. I have arranged my videos in playlists by category so it will be easy to find. Sending you the bead luv ❤️💜🌸
Všetky výrobky sa mi veľmi pacia
Great video, very beautiful bracelets!
Ninivel Douglas Thank you do much Ninivel 🌺💕😃
Thanks very much for the tutorial. I really like the style and wanna make it. Funny question: can I use delicas for this bracelet or it won't look so pretty as the seed beads? Thanks
+Shavy Hass Yes try it with Delicas! I think it could look cool 😎
Hola ! Soy una de su estudiante . Me siento como si fuera mi amiga y estas hablando conmigo personalmente. Dios la bendiga!
Hi Stephanie, loved this video. And, as another viewer mentioned, I love the ring on your left hand. Do you have a tutorial for that ring???
Thank you Shawne😊🌻🙏 Here is a link to the Crystal Bling Bling Ring th-cam.com/video/DRBr4yZrw4Y/w-d-xo.html
Love your videos. This one is fabulous.
amber price Thank you so much amber 🙏🌻😃
Hi Stephanie! I bought the green Wildfire thread a while ago so it would be less visible and as I was beading, the color stripped off! Haven't used it since, but now, so many beaders are using it, I'm wondering if I just got a defective roll. I guess if no one else is having this problem, it was just me! 😕. By the way I contacted Hillary to order a mat. She's super nice!! Thanks for the tip! 😊
+Anna Centanni I had that happen once when my needle eye was too small for the thread. The needle scraped the top layer. I use a size 10 or 11 Pony beading needle with Wildfire. I use 6lb Fireline with a size 12. I love RingBerries mats! Super colors and quality. Hillary is great🌺
Anna Centanni, I do not know where you purchased the thread, however, you can tell them what happened and they should send you a replacement. I have had my Fireline replaced from the manufacturers themselves. I hope that this helps.
The bottom color of wildfire is white with the colored coating on top, so if you scrape the outer color the white will be showing through.
Beautiful work my dear! Tank you so much for the tutorial
+Maria Roa Thank you 🙏
This looks very similar to Jill Wiseman's "Forever Tango" bracelet. Was she your inspiration? It's always interesting to see how beaders modify existing designs to create new pieces.
+John Cook I don’t know the bracelet you are referring to John😊🌻 This was from my own beady brain!!! I’m sure Jill’s is lovely too🌻
So cute!!! As always great tutorial, thank you.
Thank you Kristine 😊🙏🌻
What beads and bicones are you using in this video. Love the colors!
+Jean Gaissert Miyuki 8/0 Duracoat Matte Eucalyptus and Pacific Opal Bicones.
Did you mean Pacific Blue Opal? The Caribbean Blue looks really dark.
Jean Gaissert I put the colors in the description box under the video 🙏🌻😃
Jean Gaissert Yes you are right - Pacific Opal 😃
I've watched all of your Corona videos, and I seem to be the only one who can't do this. Do you have any tips for keeping correct tension, so that the columns are even? I haven't gotten past the first strand, because it comes out wonky.
Can I ask e where you get the bronze seed beads thatyou use at. Could you please post a link? I would love to make some of projects.your the best in you tube. A Your voice is soothing.ty for sharing your talent with us...
+Tabitha Crisp Thank you🙏😃🌻Aura Crystals and Beads have the Miyuki # 11-457 Metallic Bronze Seed Beads.
Im from Zimbabwe Africa and I tried ordering from them but they said they do not ship to Africa. Any other reccommendations?
Lovely bracelet...could you use toho 11/0's? instead of 8/0's I have a ton of 11/0's lol
Thank you 🙏 Yes use your Toho’s 😊 If you are using 11/0 you will have to adjust your bead amounts and maybe use 3mm bicones.
@@BronzeponyBeadedJewelry Thanks for getting back to me(: appreciate it!
The knot looks complicated . But always beautiful and creative. How long have you been beading Stephanie?
Domesticdiva10 It’s really pretty easy to make 😉😃🌻 I’ve been beading for 25+ years on and off 🌸
I did realize after watch you it was not difficult to follow. thank you
What inspired you to start?
Loved the video and the bracelet. Can't wait to try it! Thanks so much. ❤️❤️❤️
+susan mechanic Thank you so much Susan 🌺😊
+susan mechanic Thank you Susan 🙏🌻😃
How many beads to add it on
Should I measure the wrist size of the person? She has little wrists. If so, how much longer than the wrist circumference should the initial square beaded sections be?
Love the bracelet! What color seed bead are you using in the video, the blue/green? I want to order it.
Carmelina C Thank you Carmelina 😃 The seed bead color is Miyuki Duracoat Opaque Dyed Dark Cyan Blue #4481
Uaau I've discover you just now and I'm in schock!!! ... I love your work!!... you have an incredible hands!!!... Thanks for learn us.... A lots of Thanks ... kisses from Spain 😚💖💕
+Lourdes Acuña Thank you so much Lourdes🙏😃🌻 I am so glad you are enjoying my channel 💜❤️😘
Beautiful, working on mine now
+Carol Hutchings Yay 😀 Have fun 🌸
Hola! Muy linda pulsera, me encantan sus trabajos, me encantaría si también los materiales los escribiera al español. Muchas gracias y felicitaciones!
Saludos desde chile :)
Stephanie,I tried reading through the comments to be sure I hadn't missed the answer to this question: what is the color of the 8/0s in the bracelet with the red bicones? Thanks
Wanda T. The seeds are Nickel Silver Miyuki 8/0’s 🌻
Bronzepony Beaded Jewelry Thank you!
Покажите как вы плетете кольцо на левой руке
What size bicones are you using?
Can the Corona Knot Bracelet be made with 11/0 Miyuki and then of 3mm FP?
+Virginia Barreras I think it would be very pretty!
@@BronzeponyBeadedJewelry Can I use 6/0 beads???
Luvly bracelet could you use another clasp n could it be done as a bangle? and could you sue another kind of beads instead of the 4mm Bicones ? Thanx
Brenda Classen yea I'm sure you can as long as they're 4mm. I've done many of Steph's projects and I did her regular Corona bracelet and used 4mm pearls instead, it came out beautiful. So I'm sure you can use fire polish, pearls, bicones, rounds, as long as it's 4mm. Just a little help for both you and Steph. She's my favorite bead teacher.
Brenda Classen Yes as emanuel said. Choose your clasp and any 4mm should do. A bangle would require a different pattern as this is a flat bracelet that wouldn’t roll on the wrist very easily. Good idea though 🙏🌻😃
Hope u could show us as a bangle thanx .
Hermoso!! Pero sería muy bueno traducir en español
I love this, can't wait to do one. Thank you Stef
Ester Riekert Thank you Ester 🙏🌻😃
Where do you get the box clasps? Thanks so much for all your tutorials. I'm just getting back into beading and can't wait to make some of your beautiful pieces.
Sandi K.
Sandi K. Thank you Sandi 🙏🌻😃 Glad you are coming back to the craft! The box clasp is from Firemountain Gems but I think you could find it on Etsy or other bead websites as well.
Good Morning, I would like to know if you could make a knot corona ring?! I have a hippie daughter who loves knot style rings and I can see the knot bracelet and the knot ring as a set. Thank you.
Sharon Staggers-Moss I’m working on a knot ring so stay tuned lol 😆🙏🌺
Again, I love your videos!
+Tamara Clapper Thank you 🙏
Beautiful ❤️❤️❤️❤️❤️
Wow! Gorgeous! Thank You.
+KarenB! Thank you Karen 😊
Woooohooooo!!!! Guess who is off work tomorrow??!! Lol! Can't wait to get started! 😘😘😘😘😘
lori yonker Haha you go girl 😆😉🌻🙏
Would it be possible to extend this into a necklace? I really like the design!
+StoneStoat Yes, I’m working on a necklace design. You can extend it as is for a choker but I’m not sure it would lay correctly for a longer necklace as it is right now.
Sag elinizdeki yuzuk cok güzel
Love it, as usual. Don’t know much about wildfire, is there a particular size or pound I should use? Thanks once again for your amazing tutorials.
+rose gaither Thank you rose🌺 Wildfire is a thermally fused beading thread made by Beadalon. It comes in a few diameters and lb weights. I use the .006 inch 0.15 diameter in Black for most beading projects. Check out Beadalon’s website for more info. The best thing about it is the color doesn’t come off on my fingers🌻 It’s alsoa bit stiffer than Fireline. I still use Fireline as well.
Bronzepony Beaded Jewelry thank you
Thank you so much. It is very pretty.
+SaK Thornton You’re very welcome 😉
What are the details of the Wildfire? Diameter, strength?
+Domesticdiva10 The Wildfire I use is .006 and .15 diameter. Go to the beadalon website to see other sizes and colors. Most bead websites have Wildfire as well. Craft stores such as Michael’s, Joann etc might also have it.
Sorry but I didn't understand how many beads I have to fit on the wire?Thanks a lot❤️
patty Welsh You mean the thread? There are about 13 - 8/0 seed beads to an inch. Multiply 13x the number of inches of your bracelet minus about an inch for the clasp. Add about 10-15 extra beads to each thread to accommodate the knot. That being said, you must also hold it around your wrist as you sew to fine tune the fit. I hope this helps😃
This ?will be my first project. Have watched the video three times and think I can do it. Does Wildfire just come in one size or width?
I’m so glad you are doing this one🙏🌻😊Wildfire comes in two widths .006 and .008.
Without me looking for it in the video, which did you use for this bracelet. Thanks.
Did I miss it - how many 8/0s do you start with on your thread?
I might redo this video to make it easier but until then, this is what i did. I used a measurement not the amount of beads to start. So you'll use your bracelet size and add about 1 1/4 inches to accommodate the knot in the center. You are going to fold each of pieces over and knot them together. I explain it in the beginning of the video. So if my bracelet size is 7 inches with a clasp (6 inches of beading and 1 inch for clasp), I'd make two pieces 6 inches long. Add about an inch or 1 1/2 inches to each piece to accommodate the knot. Folded over and knotted you should have close to six inches. The clasp adds the rest.
Before sewing end of strap couldnt you thread crystal in between instad of adding onto the top?
+Terry Nicholson Not sure what you mean Terry😃 If it makes it easier to do them I say go for it 😘
Love this bracelet!! Do you remember where you got the clasp?
+Sally Yotz Thank you Sally 🌻 I purchased the clasp from Firemountain Gems but you can also find them in Etsy and other bead websites.
Great! Have a wonderful new year! I know you sure brightened my 2017. :)
cool thank you
Hi, your tutorial is beautiful (ring, crochet ,and your artfinger ) thank you. *__* .
Hi Stephanie! One more question: Do you think using 8/0 delicas would work?
Wanda T. Yes!
Bronzepony Beaded Jewelry Thank you. I’m going to try it.
Hi Stephanie, please if you don't mind providing the colors of the size 8 seed beads you used in the video. I would greatly appreciate it.
Donna Robinson The seeds are Miyuki Duracoat Matte Eucalyptus and bicones are Swarovski Pacific Opal
Bronzepony Beaded Jewelry thank you
Donna Robinson Correction - the bicones are Pacific Opal
last question the seed beads with the red bicones what color are those?
They are Miyuki Metallic Bronze #457
Beautiful
Thank you Vita
Muhteşem. Harika.Beautiful. Thank you. Türkei.💖 👀 💖
Parabens extremamento lindo obrigado por compártilhar bjs
Thanks my friend for sharing this video with us.
Maru Peretz My pleasure to share this with you Maru 🙏🌻😃
رائعة تسلم ايديكي
Ciao, ce il tutorial dell'anello ? Grazie e bravissima 😉
Вы молодец!!! Спасибо!
Very nice. Thanks
Thank you 😊
Hi Steff, Favor to ask, Could you please show how you make the bangle that is made with herringbone stitch where 4- Size 8 beads are used ,then there is Size 10 beads are 2-3-4 beads gradually added to two sides then there is the decrease of 2-3-4 beads on each side there is no twist to this bangle. Show the twist in a bangle would be awesome also. Your tutorials are so fantastically well explained also you don't bead like a mad woman trying to avoid from making a part 2 video lol, Ha Ha. I just made that saying up :) Part 2's are okay with me but my beads fly around trying to keep up. Yes there's the speed control but really watching a well explained video hearing a slow-moe voice and falling asleep with a needle stuck in your finger. To funny of a thought lol...~~~ :)
I’m not sure which bangle you are talking about 🧐 Is it my design?
No. I've looked have not seen one yet on your tutorial page here. It may help if I told you the full name lol. Tubular herringbone 4-bead's used in the making the bangle. Work the 4- bead's for about 4 row's then you start 2 splits one on each side going around adding smaller beads in split of each side as you go around.
I don’t know this pattern Cindy. You can send me a pic on my Facebook page and I’ll see if I know the designer. Http://www.Facebook.com/BronzeponyBeadedJewelry
Selam Stepfeni, bilmiyorum ismini doğru yazabildimmi ? Ancak bu güzel tasarimlarini, butun insanlara hem eğitim hemde çok severek yaptiğini gösteren bu nazik gönüllüģune hem çok teşekkur ediyorum, hemde çok değerli ve ćok asil buluyorum.
, TIPKI BU ÖZEL TASARIMLARIN GIBI, SANA ÖZEL TEŞEKKUR EDIYORUM...
SO LAT ME TRAY TO WRITE IN INGLISH LANGUACE AS TURKS WOMAN
STEPFENI.. YES I WILL .
. LATE ME SHOW YOU MY LOVELY INTERESSED AND TO TANKS, FOR BE A WOMAN SHEAR , TO YOUR AND YOUR BEUTIFUL ❤ OBJECTS
JUST 💯 ❤💃. TANK YOU IN THE NAME OFF BEUTIFJLL WOMANS TO, AND TO BEING A WOMANS ART'S TO
Maravilhoso de lindo! 👏👏👏😁😘
Thank you 🙏