Z3 Cubing, I love doing a checkered pattern by swapping adjacent colors on both sides. For instance blue with white and green and yellow. Unfortunately, you can only do that on every other odd puzzle like the 5x5 and 9x9 and 13x13. You can still do it on the 7x7 and 11x11 but you have to swap red and blue or red and white after because there's an edge parity.
This didn’t take that much longer to solve than it took me to film my collection video, but with what my experience with it would be...yeah might as well set aside my whole evening for this. Though I don’t know when or if I’ll ever get this, but this video shows that anyone can dedicate themselves to complete even the most daunting tasks.
I got the mfjs 13x13 for 120 SGD on offer, which equates to about 90 USD. turns like a dream, really nice and solid shades. edges are not as rounded so it does feel slightly uncomfortable at times, but still a joy to solve.
@@AsherCubing10 I did not get it from the cubicle or other US. shops. I live elsewhere. I got it online during a sale. And the US dollar is worth slightly more than the Singapore Dollar. So my conversion should be correct.
Hey Z3Cubing, did you manage to set the tension somehow? Mine is SUPER hard to turn. Maybe I just need to lube it everywhere? The centre pieces don't pop off. The MF11 and MF12 that I have do have tensioning :(
Would you kindly put out a tips video for solving the 9x9 or 13x13? My 9x9 takes about 2 hours. I've seen you do it in about 20 minutes. There's gotta be some tips you have for us.
The MFJS is 2mm^3 bigger than the YuXin. It is also slightly lighter by 8 grams (not much of a difference) and still turns very well. My solve took ~1:48:00. Keep in mind, I’m 10 years old, so this is impressive. Which one you want? Well it depends on (obviously) what you are looking for. If you want a budget friendly speed cube that turns well, get the MFJS. If you are looking for a good quality 13x13 and you are willing to spend an extra $20, then get the YuXin. I mean, if the YuXin 14x14 is the same size as the MFJS 13x13, you know they are really compact. I’m sorry Z3Cubing for this next part. Since I got this from Black Friday sales from Speedcubeshop, it was a lot cheaper at $112. And even now the MFJS 13x13 is a few dollars cheaper. But you should still use thecubicle to get it to get 5% off. But honestly, make sure to check both websites whenever you can so you can get low prices. Hope it helped.
@@Jonathan-st5oy it means that it isn't pillowed, which means the corners are like 80° (it is curved to the outsinde). Short: It has got flat faces instead of curved face.
If you turn a cube bigger than a 5x5 by 45 degrees, the outer corners will end up hanging off the rest of the cube in an impossible manner. The best solutions are to pillow the puzzle and make the outer corners/edges thicker than the inner pieces.
I just uploaded the full, unedited solve. Check it out here: th-cam.com/video/E5TtVPYtzfU/w-d-xo.html
2nd
great video the only thing i wish u could have done was the cube in a cube in a cube in a cube etc. pattern
Thanks
Can you do a non-cuber race of a 13x13?
I ordered it yesterday
waiting for comments saying he solved it quicker than they can solve a 3x3
those comments are absolutely hysterical it makes me laugh so hard
he solved it quicker than i can solve a 3x3
Well he solved a 3x3x3 as fast as I can... So I am already not allowed to comment that if I have to be honest.
It's been 2 years and I still haven't solved my 3x3x3
I can't even solve a cube
0:10 Now that is an unboxing experience!!!
Yes
Z3: this is the smallest possible the peices can get
SengSo 19x19: Am I a joke to you?
@@mutated__donkey5840 That's the new name for ShengShou
@@Sreekar617 when did they do that lmao I didn't realize
the 19x19 is 1 grand or a mcflurry
@JR None That is not mass produced, but i guess ur right
33x33 rubik's guiness worlds record am i a joke to you ?
On the superflip pattern, the orange and white look sooo good together.
Reminds me of whataburger 😂 It does look really good tho
@@audbee14 lol
Reminds me of an orange Vanilla Ice lol
@@Kewbix hi kewbix
If Alex doesn't say: "Hey guys, welcome back to Z3 Cubing!" at the beginning of the video, you know he's either really serious or REALLY EXCITED.
Z3 Cubing, I love doing a checkered pattern by swapping adjacent colors on both sides. For instance blue with white and green and yellow. Unfortunately, you can only do that on every other odd puzzle like the 5x5 and 9x9 and 13x13. You can still do it on the 7x7 and 11x11 but you have to swap red and blue or red and white after because there's an edge parity.
I’m not a rocket scientist, but I’m pretty sure 12 people can’t be first...
oh i was first
@@imcubing5567 no
Exactly
Damn thats smart. Why didn't I think of that? :P
*FIRST*
wow that thing looks insane!! im getting my first 10x10 for Christmas!!
wow
Bruh
Great bro. I'll be waiting for your reveiw.
@@gwendolyn3083 thanks, though it will only be an unboxing i think, but it will be a realllllllllllyyyyyy big unboxing
Your intro is so nice, came back to your channel after quitting cubing for 6 months, and the nostalgia was overewhelming.
Everybody: Get the 19x19
Z3cubing: No!
True
$1000 tho...
@@Z3Cubing haha
@@Z3Cubing Then i wont think more than a 7x7.....
XDDDDD
@@Z3Cubing I mean, didn't you say you weren't getting the 17x17 because you were waiting for 19x19. smh
Thanks Alex!! I just ordered myself a 13x13 to be just as cool as you. Thank you so much for the influence that you made on many cubers lives!
Seeing giant cubes like this one reminds me of the time I thought 4x4s were so big they would be nearly impossible to solve
Now the 7x7 looks small and wow that’s s a insane cube I want it
I missed you so much Z3 cubing
im so stupid i thought the timer when he was solving it was minute/second/microseconds[i forgot the word]
5:35
like damn he fast
Millisecond, though microsecond is a unit of time, so still works :p
ah yes solving 13x13 in a minute he is soo good
Milliseconds lol
@@xero_panda7664 ikr
I am amazed how he is able to make those crazy patterns right after he got the cube.
Wow
Magic
Yes I was waiting for the superflip!!
Most entertaining cubing channel 👏🏻
Hats off for your job 👍🏻
I NEED THAT but i just ordered 6 3x3s for force cubes lol
Can i have one
@@drafusjokelol1335 lol
drafusjoke lol i literally spent almost 100 euros why would i
@@Rednaxicus idk im pore af
@@drafusjokelol1335 may I suggest a face mask?
This didn’t take that much longer to solve than it took me to film my collection video, but with what my experience with it would be...yeah might as well set aside my whole evening for this. Though I don’t know when or if I’ll ever get this, but this video shows that anyone can dedicate themselves to complete even the most daunting tasks.
The full solve is 1:24:21.
13x13
$190?! Are you opening a Gan 6x6?
Ohhh dammnnn. Thats awesome. Im still on 7x7. Btw you're my fav youtuber. Im commenting from my moms phone
Am i the only one who loves 2x2 cubes. 2x2 cubes are just so smooth and semi easy.
This video was amazing and I loved it
Z3:i dont want my cube to fall apart!
Also z3: it would make for a funny outro tho....😆
Hey
I am hridit your friend lol
@James Scott no he is my friend
Everything about this video is just.... soooooo satisfying!
Love your videos I am a big fan
Video: *exists*
Comments: there are 13 comments!
Me: Cool can I see them?
TH-cam: ummmmm..... no
same!
So overused
Fathom RL true
😂
Just filter it by new comments it will show up at any time
Everybody: 19x19 ya
Z3: 13x13 yay
I watch Z3's vids mostly for that amazing outro
Who doesn't
And I watch his videos for his amazing INTRO
Nice 7x7 pfp
I watch the videos for the main part
I got the mfjs 13x13 for 120 SGD on offer, which equates to about 90 USD. turns like a dream, really nice and solid shades. edges are not as rounded so it does feel slightly uncomfortable at times, but still a joy to solve.
No it is $164 USD
@@AsherCubing10 I did not get it from the cubicle or other US. shops. I live elsewhere. I got it online during a sale.
And the US dollar is worth slightly more than the Singapore Dollar. So my conversion should be correct.
@@jeremypee4128OK
Also in China the GAN 14 is 600CNY which is 100USD but in TheCubicle it's only 90-ish USD WHAT!??!????!?!?!?!
Nice dude, there is a yuxin huanglong 12x12 too.
And a 14x14
I love this man his videos are short so I watched it not skipping at all.
6:00
Z3Cubing: Finally
Yeet
I got a Petaminx on a black Friday sale for 140 dollars. It's normally over 200 dollars 😀
Neat.
New intro is great
I love z3 cubings vids
Nice!
Do you plan on getting anything bigger than this in the near future?
Probably not in the near future.
Wait till he buys the 21x21.
Just the fact that i can hold my hands: nice
Next up: Z3 unboxes the 15x15, and eventually the 19x19
He unboxed a 21×21
Can’t want for you to get the 19x19!
YES
I can't wait for someone to release a cheaper 19x19!
And by that time there will be a 23x23
There is no such thing as the 19 by 19 there is only a 17 by 17 and do you mean wait
@@Z3Cubing seng so made that
yoooo the z3 pattern is sick!
Hey Z3Cubing, did you manage to set the tension somehow? Mine is SUPER hard to turn. Maybe I just need to lube it everywhere? The centre pieces don't pop off. The MF11 and MF12 that I have do have tensioning :(
Would love to see you compare this to the Diansheng Galaxy 13X13 M, as that one is magnatic and even smaller (92x92 mm).
I’ve been cubing for “9” years and my biggest cube is a “9x9”
Did u mean to say that on purpose?
It’s hard to fit 3 2 by twos in your hand?
Wow I must have big hands cuz it looks like I could hold 3 3x3s
the cubicle must get this guy a 19x19......
Yeah I'm pretty early. Nice video alex
Wooooooo!!!!!!
Unlimate cube !!!!!
Are you going to solve all your cubes again?
Certainly not anytime soon (last time was less than a year ago), but *maybe* in amother year or two.
Would you kindly put out a tips video for solving the 9x9 or 13x13? My 9x9 takes about 2 hours. I've seen you do it in about 20 minutes. There's gotta be some tips you have for us.
wow what a cool cube nice (im early but idrc these are just pixels with brightness lol)
So close to 500K!
I have a MoYu 13x13 with stickers. But the stickers are so unstable and fall off pretty easily. Perhaps it's time for an upgrade.
As an owner of the MFJS 13x13, I would say it’s great for budget.
The MFJS is 2mm^3 bigger than the YuXin. It is also slightly lighter by 8 grams (not much of a difference) and still turns very well. My solve took ~1:48:00. Keep in mind, I’m 10 years old, so this is impressive. Which one you want? Well it depends on (obviously) what you are looking for. If you want a budget friendly speed cube that turns well, get the MFJS. If you are looking for a good quality 13x13 and you are willing to spend an extra $20, then get the YuXin. I mean, if the YuXin 14x14 is the same size as the MFJS 13x13, you know they are really compact. I’m sorry Z3Cubing for this next part. Since I got this from Black Friday sales from Speedcubeshop, it was a lot cheaper at $112. And even now the MFJS 13x13 is a few dollars cheaper. But you should still use thecubicle to get it to get 5% off. But honestly, make sure to check both websites whenever you can so you can get low prices. Hope it helped.
wow ur uploading sooo much
Finally got a huge nxn cube, took you long enough
Dang it only took you 1 min and 24 seconds :O
Lol
Hi Z3 the cube is so cool
That's crazy expensive but worth it
Still a great value compared to any other bigger cube!
@@Z3Cubing true
True Most big cubes like a 17x17 are well over athousand dollars
@@Z3Cubing Do a color swap checkered pattern with blue and white and green and yellow. It's really cool and I call it the adjacent checkered pattern.
I just watched the full solve video but of course I didn't watch the full video I just skipped to the end
luv ur vids btw
Holy crap, thought a flat faced 13x13 was impossible, then yuxin is like "No"
What is flat faced?
@@Jonathan-st5oy it means that it isn't pillowed, which means the corners are like 80° (it is curved to the outsinde). Short: It has got flat faces instead of curved face.
@@Jonathan-st5oy The sides are flat instead of pillowed
@@Ben-ug7gc I was just on a J Perm video and he explained what that is lol but thanks!
Why would it be impossible? The record order cube, a 33*33, is flat faced
Z3 -my new big cube- yuxin 13x13 Unboxing
Me- looks at my 3x3
Why you didn't use that's 125 cube intro
Please use that I Love that one
The LegoBoyZ3 intro?
It was just a fun little demonstration; the classic Z3 cube is the best. The colors are all wrong, anyway.
@@Z3Cubing Oh really? 😌.
I like your voice btw.
I love how this thing looks like a plushie. Just look at how puffed out the corners are.
Is there going to be a 2021 cube collection?
No
I can't wait magnetic spring edition 13 by 13 cube
There is a 17x17 cube, idk what site but you should try one, took one guy 5 hours to solve lol.
Creeper Snowguy theres also a 19x19 that got mass produced
Where did u find the 13x13 at? I want one as well, but didn't know where to find it . Can u help me out? Thanks.
Description!
why are the corners and edges not the same size as all the centers
If you turn a cube bigger than a 5x5 by 45 degrees, the outer corners will end up hanging off the rest of the cube in an impossible manner. The best solutions are to pillow the puzzle and make the outer corners/edges thicker than the inner pieces.
@@Z3Cubing oh so if you tried turning it, the corner pieces would be hnanging off
He solved it faster than me solving a 3x3
He solved it faster than me solving a ghost cube (yes I can solve it)
That thumbnail be trippy tho
I love ur vids
Wow! 1 minute 25 seconds solve!!
I don't think I have this puzzle jet, but else have (almost) all puzzles from 8x8 to 19x19.
I like cheese
AND ALSO CUBING!!!!!!!
Is solving the 13x13 like the 7x7 but longer?
yeah
Yep
This video was sponsored by Yuxin
21 minutes ago
@@guriathakur5095 33 minutes ago T_T
It hurts how accurate this is
Z3:this is my largest cube.
Me: my biggest cube is a 4x4
It looks... soft?
Why didn't you get a 10x10?
Can you do a tutorial on how to solve a 3 by 3
He has tutorials on it already 😊
@@pyb6 thx but I know how to solve on now
You should make a pattern that looks like a 3X3 checkerboard
Are you z3 gaming?
Im going to buy a Yuxin 13x13 too
I loved how he solved that faster than I can solve the 4x4
He can solve that faster than I can solve a gigaminx (I don't have)
> I think you know what comes after scrambling.
> Well I thought I did, but now I’m not sure.
Helo Z3 Cubing
HELO FROM INDIA
LOVE THE THUMBNAIL
I have a question for the last 2 centers is it just like the 7x7 or no?
yeah
How do you superflip without having to orient the centers?
Is "superflip" the name of the checkered / diamond pattern he did?
super flip is my favorite
I love Your videos
wow! i was going to recomend you getting a 10x10.
They still doing the huanglong line? I thought the meilong line would have killed those?
MeiLong is MoFang JiaoShi, part of MoYu. YuXin is an entirely different company, who makes the HuangLong.
I'm aware, stopped seeing huanglongs showing up nearly as often once moyu dropped those
@@MuzikBike Oh, I see what you mean. It sounds like YuXin still just names all of their new puzzles the same, though.
I literally don't know how many times he sais incredible in this video
now to wait for the yuxin little magic 13x13