How to make a hot air soldering iron from 12V car cigarette lighter
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2019
- How to make a hot air soldering iron from 12V car cigarette lighter
Requirement
Car Cigarette Lighter bit.ly/2mhqm5L
High temperature polyimide film bit.ly/2otIIBc
DC power jack bit.ly/2n3Rsh9
Push switch bit.ly/2W3ucft - วิทยาศาสตร์และเทคโนโลยี
2 issues.
Tactile momentary push buttons are not designed to carry high current, like is being used here. Especially inrush. Additionally an air source would be needed to call this a “hot air gun”. Rather it is an “Inferred heat gun”. Last but not least, You must use a plastic with a high melt/burn point otherwise ongoing use will cause the plastic to melt.
Ceramic is good enough isolator.
Its infrared indeed.
That switch is ridiculous.
refer to his video, I made one. It worked barely on small size components. You need more patient. And be careful the distance, don't burnt your component. I believe You won't use this for daily repair work.
I was just building one of these with a portable power supply. Nice build!
caption say's Hot Air.
yes it is Hot but There's no air, so its just A solder..
nice idea but I guess you still need to figure out on how you're gonna include the mini Fan or maybe a mini compressor with a tube in that thing. so it can have a flow of air. Hope you get it. but still thumbs up. such a great idea.
the next time im gonna try that I'll also includes a heat indicator ..
Thank you. The shares were inspired. I made myself a soldering machine with a H4 halogen light. Good luck.
"H4 halogen light" aren't those lights related to cancer?
W 8560088900
This is not hot air welding
Mini fan is need for a make mini hot air solding
@@zzxd7720 I don't know that much, but the halogen light I'm talking about is a car headlight. If you want, I can send videos or pictures of my work to my e-mail address.
Nice start on a hot air (although there is NO AIR) de-soldering tool, but you need to add the fan. It isn't good to have it so close to the components! You will surely damage them with it being that close. I might have to make this but also add the fan of some type to make it actually work. Thanks for the idea at least.
How about adding some fan and maybe potentio meter for control air speed ?
Qué buena enseñanza.
Muchas Gracias.!
Gostei muito, valeu mesmo, suas instruções.
Completely uncontrolled heat on the chip could cause chip failure or deteriorate the life of the chip.
If you are going to do something like this, make a tube to focus the heat on just the pins you need.
Or if you are removing the chip completely cover and mask the the other components first.
🔵 Even though the title of this video is incorrect as
this is not a "Hot air" soldering unit but rather a 'Radiant'/ reflow soldering unit, a good idea would be to put something on the front of the unit to only allow the heating element to get a specific distance from your work and not close enough to cause damage right away before even reaching flow-temperature.
love this idea. thanks
It seems to be a great idea, and it could be even better if you added some air to it using an aquarium air pump, it's really cheap and effective.
I was thinking that as well, possibly a small fan of some sort connected to the back pushing air through the tube onto the exposed coil without the ceramic white thing.
فيديوهاتك رائعة.. شكراً جزيلاً ✋
Greetings: Could you please tell me what is the name or where you can buy that kind of white compass that you make circles in this video thanks
its a caliper
Demasiado calor para los integrados,se van a quemar internamente,hay que regular la temperatura para que pase de ser una buena idea a una excelente idea
It majes sure that the components are burnt before they are soldered of unsoldered.
Were is the air part?
How many temperature of this soldering iron
Thank you for this noble job very good
Compa y al momento de poner el circuito bueno nose daña con el calor aplicado, saludos My brother Bogotá COLOMBIA
Add either an exhaust fan or pipe in a fish tank oxygenator in that tube but only heating element is to be retained for the sake of air flow and also the anterior end has to be tapering...
Good idea 👍 very useful
Won’t last long you need a relay in there. A cigarette lighter pulls about 8 A roughly it’s going to burn that little switch up. Put you a Mini 12 I’ll relay in there then you got it. I like the way you did the insulator deal with the coil itself, that part I do like
Show De bola
Gostei
Vlw brother
FICA COM DEUS
I really like your creative ideas..!
th-cam.com/video/VgIu7vTr8kM/w-d-xo.html
Looks like it will fry your components since there is actually no forced air. Why take the time to make this? You can pick up a cheap hot air unit for about $30 and it will be light years ahead of this one. No smart technician would ever spend this much time making such a poor unit!
Bro just use an 12v to 5v IC and ad a dc motor with a fan
Are you stupid we can make this soldering within 5 or 6$ so we will have profit of 25$
Great idea, I'm so happy to see the video
Very good this project 👍
I wasted 12minutes waiting for the air soldering iron, change your title and leave it as how to make a 12v soldering iron from a car lighter
nor even that !! u cant do NOTHING with it the guy should go wallmart and buy a real mind ALMOST EVERY "thing" he donde done it the wrong way : ( = in add all such materials wasted w--t--fffff !!.
good to burn things :D Good JOB!
Muito legal e foncional parabens levou meu joinha
이런 방법도 있네요 기발합니다 good ideas
Amazing u r
Brilliant
Gracias por su instrucción con encendedor de cigarros de auto.
Thanks for your imagiation
🌟useful video🌟
VERY GOOD This video
Perfect
Hello, how big current is necessary ?
Thank you. How many current does this homemade device consume?
Operating the car by remote control th-cam.com/video/5cMSi50r0BY/w-d-xo.html
good !
hola, te cuento que hice uno tal cual como lo haces tu pero el mio no se pone al rojo vivo solo calienta y ya pero igual no da la fuerza suficiente para derretir el estaño
Eu tenho desses acendedor de cigarro de carro, vou fazer aqui em casa com cano de PVC, muito boa a idéia!
Deu certo ai ?
@@Lucas_562 deu certo sim, eu coloquei um pouco de durepox em volta, porque tava querendo derreter o cano e ficou muito bom!
@@alexandroschererferreira3219 que bom que deu certo de verdade porquê essa idéia pode ajudar muito quem não tem muita condição de comparar uma estação profissional, você utiliza para retirar componentes smd ?
@@Lucas_562 Sim! Mas não pode deixar muito tempo senão pode queimar o componente!
-:)
Pytanie czy da radę zrobić na baterie jeżeli tak czy można jakiś instruktaż ? I jaka moc baterii -:)
Amazing idea very useful
Це саме найкраще що ,я бачів на ютюбі.⚓👍👍👍👍
O calor pode danificar os componentes ?
How long does this thing last ? I mean the 12 volt lighter 😊 is it gonna melt with time ?
Verdigin bilgiler cok güzel
Nice idea sir
Good job
Nice content bro
Nice job.
*Awesome* 👍👍👍👍
Good work.
Good idea
Nice 👍👍❤️❤️❤️❤️🇫🇷
Muy bien logrado, mis felicitaciones
i want to ask a question if I can use 12 v modem charger or different charger for this project it is ok?
The traditional lighter is a plastic or metal cylinder that contains a nichrome resistor, through which an electrical current of about 10 amperes passes when it is activated, usually by pushing it with a button.
Voltage used??
No ya lo avía apretado y dónde voy a conseguir un y va a soportar el amperaje el pusboton que requiere el calentador? Porque al menos requiere de un 1/5 minutos para desoldar el led
Nice Lethe machine
Could it be used for heat shrink tubing?
yes
Love your videos hate the same music.
Bhai air gun 🔫 man air kana hai
What tape do you use to fix the cables? ---- Thank you!
th-cam.com/video/VgIu7vTr8kM/w-d-xo.html
Amazing
Disculpa q le pones crema de la suelda de estaño puedes ayudarme me gusto tu idea amigo
12volt but what about amp.
It is necessary to tell about ampere. How much it should be.
new title: how to destroy your circuit
XD ACCURATE
New title lil boys scared of big bad sparky wires quit being a piss watch the video and STFU
How many amps does it consume? Сколько ампер потребляет?
Good idea, recomended
th-cam.com/video/VgIu7vTr8kM/w-d-xo.html
Very goood
ได้รู้สี่งที่เราอยากรู้ดีมากครับ
Hay lắm
Mantap bro 👍
amazing
Parabéns meu amigo um forte abraço foi ótimo poucos sabem o quanto isso é importante
😮😅
ما شاء الله انا عملت واحدة علي قطعة خشب
Onli 12v 1amp use ya 20v 4amp use kar sarkte hee
20v 4amp leptop chargar pe chalega
This is very usefy
Do you get a coke with those fried chips....Any way incorporate a fan with a fine nozzle
What is that light blue type of plastic you used?
Pvc pipe
Charcoal can be put on it and charcoal ignited like charcoal for shisha
it may be necessary to add a small stand-alone
A good thing, but the button is weak, it was necessary to apply current to the heater through the relay.
Хорошая вещь, но кнопка слабая, надо было через реле ток на нагреватель подать.
Verey nice friend.
La idea es buena pero asi se destruye cualquier circuito integrado si no se tiene un cotrol de temperatura.
le hacemos un control de temperatura con PWM o también podemos utilizar el 555.
@@juancarlosm.g.1121 flaco no intentes defender lo indefendible esto es el peor adehefesio y peor desperdicio de materiales jamaaas visto.....por añadidura el bestia CADA DETALLE DEL "MONTAJE" ESTÁ ENCARADO DE LA FORMA EQUIVOCADA ¡¡¡ y un torno para fabricar esa arandela !! está = chiflado hombre !!....NI SIQUIERA SABE COMO PELAR CABLES CORRECTAMENTE O COMO HACER LOS CONTACTOS !!!...pero si deseaba una pistola de calor lo lógico era DEJAR SUSPENDIDO EL ESPIRAL EN EL AIRE Y HACER PASAR EL AIRE A TRAVEZ DE ÉL !!...de todas formas NO es una potencia muy aceptable para el caudal de aire con que trabajaría....en cuanto a tu respuesta SI JAJA HACE UNA SEMANA AJUSTÉ UN PWM DE UNA FUENTE DE COMPU PARA OTRA COSA *TAL CUAL* ¿pero que sentido tendría?...en cuanto al 555 si ok pero creo que vas a usarlo como controlador nomás de OTRO ciruíto de POTENCIA....a propósito de potencia ¿UNA LLAVE T GRANDE PARA LA CORRIENTE DEL ESPIRAL? ...amigo con una pekenia y poner un transistor ya estaba ESO ES BRUTALIDAD POLICÍACA jaja....en fin si sigo estoy hasta mañana como dije *cada* tarea la encaró de la forma equivocada y la "llevó a cabo" de forma PEOR AÚN....¡¡¡ y todo para "fabricar" una INSERVIBILIDAD MÁXIMA TOOOTALLL !!!....como dije en wallmart creo que ya tienen cerebros si funcionales en góndola que vaya y compre uno (sino en amazon creo que hay de recambio que entregue el viejo y listo).
encima conmtestando tú a "LA IDEA ES BUENAAA !!..PEROOO..."" la idea NO SOLO ES MALA = INDICA IGNO0RANCIA TOOOTAL DE *TODO* PERO *TODO TODO TODOOO* LO QUE TOCA Y MANIPULA y todo para hacen *encendedor de auto que se puede tener en la mano y se enciende cun una llavecita* ( y ojo llavecita que SI VA AAA = FALLAR Y PORNTOO esas latas NO aguantan ese amperaje a 12V ) yo vine al vídeo porque yo SÍ me fabriqué uno de baja potencia similar ¡¡¡ pero con un motor de vibrador de celular dentro soplando el aire con una pequeña turbinita de aluminio de lata de desodorante TOTALMENTE IRROMPIBLE y para muy muy bajo flujo puede llegar a servir quizá en algo de electrónica MUY PERO MUY MUYY miniatura tambien pero yo la fabriqué para otras tareas Y SÍ QUE SIRVE pero *principalmente* SÍ es una pistola de aire caliente no esta payasada.
@@somosprolongaciondelsolasu2053 has un video de tus creaciones? seria muy bueno para todos!
Nice
Donde consigo los materiales interesante video
سُبْحَانَكَ اللَّهُمَّ وَبِحَمْدِكَ ، أَشْهَدُ أَنْ لا إِلَهَ إِلا أَنْتَ ، أَسْتَغْفِرُكَ وَأَتُوبُ إِلَيْك.َ^-^♡
Sirve para sacar el pin de carga
already measured the temperature to see how much you get by approximation?
These projects always work on the first try... How?
Some are really good , but some are sh*t.
Saya dari Indonesia suka dengan ide kreatif anda
👍👍
It may damage your parts.
Will
I didnt think it would be this involved
A parte de conectar un encendedor, que mas sabe hacer
عالیه. اگه طوری طراحیش میکردی که باد هم بده عالی تر میشد