Came here after restoring BMW 2002 in the Car Mechanic Simulator 2021 - Game. Loved to see it in real. You made it look just like the game but I can only guess the real hard work gone into it. You really have a superpower!
The car looks and sounds great 🤩. You put a lot of work into this car and it shows. The result is very nice 😍. If I were picky, I would say the brake booster may have deserved a bit of love. With a shiny engine, new subframe and suspension, it stands out like a sore thumb 😎.
Well done. My 76 02 5sp (wife’s car) has been in garage for 8 years after motor swap. Love your non nonsense videos, music and production quality. Above all your knowledge is refreshing. Thank you.
David, after all of this work, you've replaced, welded, hammered, painted and repaired almost every part but,.. the camera shows us the brake booster as NOT painted,... why not? It's a beautiful looking car, you've done really well quite apparently. Sorry that I just had to see that and question it, but hey, this is what happens when the viewer is only looking through a camera lens.
E21 5 SPEED????? You lucky guy!!!! Have been looking for one for AGES here in Europe, but the few I could find were way too pricey (they easily exceed the 1k euros, go figure!!!). E30 M10 5 speeds come ridiculously cheap, compared, will fit BUT no place for the speedo cable 😞
Lovin' your efforts, David, both with the camera and especially with the car. And sir, you know how to "burn a weld" for sure! I'm in the midst of much of the same with my '74tii. . .
No velocity stacks on the Webers? I put foam motor cycle filters on mine to keep the the velocity stacks. I had BBS 3 piece 6 inch wheels, Alpina intakes and throttle linkage. I had 33 chokes on the Weber's . A 74 with the ugly bumpers, turbo air dam. She was a runner.
Another awesome video David ! Just curious about gearbox setup. This is not Getrag 245 with speedo cable hole, am I right ? Can you please specify your setup ? I am looking for 5 speed but maybe overlooking different setups than 245s.. thank you
Hi David, I'm about to take the engine out of my 1600-2, but saw that you dropped the engine and subframe altogether. Are there any instructions you know of on how to do this? Cheers
I’m rebuilding an m10 there is a heater hose in the back of the block I believe or a coolant line. I don’t know what it’s purpose is because it looked like it was connected to hose that went into the firewall. I was wondering if I could cap it off. I see you have a metal line that looks like it 90s off into the back of the block.
Are you sure this is a tii engine? Tii means injected with a kugelfischer system. It seems as though this engine does not have an injection system but duel side draft carbs, maybe its a ti engine?
Sorry. To bother you but question if you have the time. Engine is all fresh rebuilt but for some reason I can’t get the engine to rev past 3500 rpm’s and it back fires like a tank.
That will be down to ignition and carb tuning. Can’t tell you exactly what would be wrong but look at engine igntion timing first. Backfire is usually sparking at the wrong time!
Hi TH-cam family, I'd like to know if I can swap this M10 engine into an e46 with the zf 5speed transmission, I'm looking for reliability, please advise🙏🏽
Came here after restoring BMW 2002 in the Car Mechanic Simulator 2021 - Game. Loved to see it in real. You made it look just like the game but I can only guess the real hard work gone into it. You really have a superpower!
Fenomenal job. You brought me back to 1985 when I had my car. It was the same year 1976 2002 tii. Thanks
The car looks and sounds great 🤩. You put a lot of work into this car and it shows. The result is very nice 😍.
If I were picky, I would say the brake booster may have deserved a bit of love. With a shiny engine, new subframe and suspension, it stands out like a sore thumb 😎.
Well done. My 76 02 5sp (wife’s car) has been in garage for 8 years after motor swap. Love your non nonsense videos, music and production quality. Above all your knowledge is refreshing. Thank you.
just binged the entire 2002 series. really enjoyed it! great work on the patch panels for the rust repairs.
It is so joyful to see this little awesome machine on the road again, really great effort, cheers
Man I wish you were in NYC! I need you 😂.. Dope video. Definitely inspiring for my 74’ 2002 🦾🦾
Really love the drone shots at 10:00! The prairies are beautiful, and I'm really missing that weather right now
I couldn’t agree more about the color. It look awesome. Great work, have fun driving it!
That compilation at the end was perfect!
David, after all of this work, you've replaced, welded, hammered, painted and repaired almost every part but,.. the camera shows us the brake booster as NOT painted,... why not?
It's a beautiful looking car, you've done really well quite apparently.
Sorry that I just had to see that and question it, but hey, this is what happens when the viewer is only looking through a camera lens.
Oh man! Fantastic job! Love these cars
Looks great 👍 sounds great 👍
AWESOME BUILD!!! GREAT SKILLZ!! ROAD TRIP!!!
E21 5 SPEED????? You lucky guy!!!! Have been looking for one for AGES here in Europe, but the few I could find were way too pricey (they easily exceed the 1k euros, go figure!!!). E30 M10 5 speeds come ridiculously cheap, compared, will fit BUT no place for the speedo cable 😞
Gratulations looks and sounds wonderful
David this series has been great. Thanks for making the videos.
Phenomenal progress and awesome content again. It looks and sounds amazing. U.K. salutes you. This was so addictive to watch. 🇬🇧🇬🇧🇬🇧
You make it look too easy Dave! Well done
You may have a lot of time into this car, but from where I'm sitting it looks like time well spent. Excellent work on an excellent car.
Seeing other youtubers do stuff with the M10 platform puts a grin on my face man! You forgot to add a turbo again!
Lovin' your efforts, David, both with the camera and especially with the car. And sir, you know how to "burn a weld" for sure! I'm in the midst of much of the same with my '74tii. . .
Impresseve!! Enjoyed the videos!
very good job.....to add that the carburetors need repair, I don't hear it working properly! Good to you!
Man you make this look easy
Is there a build blog or some place you document all the parts/upgrades and where you sourced them?
No velocity stacks on the Webers? I put foam motor cycle filters on mine to keep the the velocity stacks. I had BBS 3 piece 6 inch wheels, Alpina intakes and throttle linkage. I had 33 chokes on the Weber's . A 74 with the ugly bumpers, turbo air dam. She was a runner.
Another awesome video David ! Just curious about gearbox setup. This is not Getrag 245 with speedo cable hole, am I right ? Can you please specify your setup ? I am looking for 5 speed but maybe overlooking different setups than 245s.. thank you
Thank you! This is a Getrag 245, with the speedo cable hole. I believe it has a 2002 automatic speedo cable as they are longer. Hope that helps!
Great video...thank you! I'm restoring a '72 now. That exhaust sounded great....what did you go with?
Thank you! I don’t know the brand of exhaust. I want to say it’s an Ansa but I’m not sure. It’s an old setup. Sounds great though!
Hi David, I'm about to take the engine out of my 1600-2, but saw that you dropped the engine and subframe altogether. Are there any instructions you know of on how to do this? Cheers
Did you actually get any drop from the springs?
The valves sound a tad noisey,have you adjusted them lately?
Hi David, I have a 72 2002, I am in Vancouver BC, Canada. Do you work on other peoples 2002s? Thanks
Is the exhaust header’s from blunt tech also?
David, did you end up keeping this car? How is it doing two years later?
Do you ever remove any bolts without a nut gun?
I had a BMW 2002tii 1975 in white. I restoring it but my turbocharged is not repaired. Would you help me in finding a new one turbocharged?
Hi David great job 👍
How much did you reduced the driveshaft ?
I am about to install a 5 speed too.
Thanks
Farid
Thank you! The car actually had a dogleg five speed so the driveshaft was already the right length!
What kind of carbs did you use?
I’m rebuilding an m10 there is a heater hose in the back of the block I believe or a coolant line. I don’t know what it’s purpose is because it looked like it was connected to hose that went into the firewall. I was wondering if I could cap it off. I see you have a metal line that looks like it 90s off into the back of the block.
If its what I am thinking that’s a coolant hose to the heater box!
Do you know if I can cap it off or do I have to run that
Because it comes from the water pump.
Are you sure this is a tii engine? Tii means injected with a kugelfischer system. It seems as though this engine does not have an injection system but duel side draft carbs, maybe its a ti engine?
Getrag 265?
Where did you get all these parts from?
Sorry. To bother you but question if you have the time. Engine is all fresh rebuilt but for some reason I can’t get the engine to rev past 3500 rpm’s and it back fires like a tank.
That will be down to ignition and carb tuning. Can’t tell you exactly what would be wrong but look at engine igntion timing first. Backfire is usually sparking at the wrong time!
@@davidsgarage thank you for the reply. I have an idea of where to start now. Thank you
4:30 USA
Hi TH-cam family, I'd like to know if I can swap this M10 engine into an e46 with the zf 5speed transmission, I'm looking for reliability, please advise🙏🏽
alot of time and money, 10k?
Le collecteur vous l'avez commende ou ?
That settles it, open up a shop and I'm your 1st customer! You're a gazillion miles away but hey