Hello when you use Orientation option @7:40 I do not get the tool positioned (I can not see the tool at that point). I have seen this option is active when there is a target but how were you able to position the tool in this case.
Hello again mate. Do you know where the rapid code of the robot movements is? Because I see that in Main_3DP there are only process parameters. While in the Main there are the Home movements and the recall of Main_3DP. But where are the several movement commands? Thank you!
I have another problem. I have installed the 3D power pack and I have created the virtual controller. I can't find the demo library of the tool and the table. Do I have to install it?
You also can use any available tool from abb robotstudio software library. If you want to create the tool by yourself you can refer to the latest post video on how to create tool.
@@jacopolettori5307 hi , you can go to website download the 3D Printing Powerpac 2021.1 and install it. new.abb.com/products/robotics/robotstudio/downloads
Hello when you use Orientation option @7:40 I do not get the tool positioned (I can not see the tool at that point). I have seen this option is active when there is a target but how were you able to position the tool in this case.
Hello, Why you pick PrintL for Application 3DP when using Installation Manager 6 instead of any of the other options.
can you please give me the file of this 3d printing ?
Hello again mate. Do you know where the rapid code of the robot movements is? Because I see that in Main_3DP there are only process parameters. While in the Main there are the Home movements and the recall of Main_3DP. But where are the several movement commands? Thank you!
Hi, nice video. Can you please share with me the pack & go file of the cell. Thank You
I have another problem. I have installed the 3D power pack and I have created the virtual controller. I can't find the demo library of the tool and the table. Do I have to install it?
You can design by yourself or load from any 3d step files design.
You also can use any available tool from abb robotstudio software library. If you want to create the tool by yourself you can refer to the latest post video on how to create tool.
@@KOTESOStudioChanneL sure, thank you. So, Do you have designed it?
@@jacopolettori5307 yes. Custom design from any 3d design software.
Hello there, I have a problem during the installation manager. When I have to add the Product, my list is empty. Would you know why?
Sorry, it is not empty, but I don't have 3DP
@@jacopolettori5307 hi , you can go to website download the 3D Printing Powerpac 2021.1 and install it. new.abb.com/products/robotics/robotstudio/downloads
@@KOTESOStudioChanneL Thank you so much!
Hello again, what kind of slicing software did you use?
Hi, i am using ultimaker Cura.
@@KOTESOStudioChanneL thank you. Did you use Marlin Firmware?
Never use before. But i think should be no issue for getting the Gcode.
There also a user manual in the robotstudio 3d printing recommend slicing software.
how do you convert step file to gcode files?
step file convert to stl file, then use 3rd party 3d printer software convert gcode.
@@KOTESOStudioChanneL thanks a lot.
crake por favor