Hello, I have a Rowe friend from 1980. I bought it in Germany from a restorer, all redone after a move. My son got it going again, but there were discs loose under the platter and the selection arm was stuck in the air. Everything works except that could you help me find out where the problem is coming from. Thank you, how do I unblock the arm?
Hi, I have a rowe ami r94, it worked perfectly until yesterday, from today appears on the display er 39, what does it mean? Can you help me understand what it depends on? Thanks in advance for your reply.
Do you have some way I can contact you? I don't mind sending you parts, etc. but really don't know where to start. My jukebox is on and running, but it will not let me make a number selection at all. There is some type of disconnect between the numbers on the front door of the cabinet and the machine itself. And, no error code ever pops up.
Great presentation. I have learned a lot from you but I have a question. Sometimes when a record is playing it will stop and then go again. I have a new needle in there along with a new belt but it still happens can you please help me? Thank you
I have a rowe 90 that has code 30 and 32. I watched and followed your video that says how to clean the optical. I have a home light, but no switch light. Bad switch or board? Any way to determine what one it is?
Can you tell me when the machine is not in use where the hand should set that picks up the records should’ve sent right over the top of the record or should it be sitting in between the records where the numbers are ?where should the arm be resting when it’s not in play?
suprb6970 That’s what I figured 💩 My machine just makes a humming noise when I power it on..I’m assuming the Carousel and arm have both been bumped outta alignment. It’s a mission trying to find a repairman too. 😭 Ty for replying!
@@lorijohnson8660 Jukebox repair men are hard to find these days. Look up some vending companies in your area, they can usually point you in the right direction. I'm in the Dallas area if that helps.
Hi! My students won the jukebox in our school for a month but when we wheeled it to my room, it doesn't work! I plug it in and the small decorative records spin and the numbers for selections, selections return light up. But when I drop in a quarter, it doesn't go anywhere. I don't hear it drop. I tried a dollar bill and it came back out. No one seems to know what to do. Any suggestions?? Please? My students are so disappointed. Thank you!!
I have a r-91 and there's no sound only on the record when it's playing but I don't know how to turn up the volume. Everything is plugged in and I don't know what to do.
Hi, I have a Rowe r86 and the turn table doesn't rotate....be 4 it used to constantly rotate for few minutes then stop. Then it worked great. Can you help me? Do you sell parts? Please lmk? Thank you Ps, do you have a way of contacting each other?? Thanks again!
Error 1 on Rowe 93 CD combo,replaced battery ran for quite some time,error code is back, battery issue again ? Or solder joint? Also can a data dump help? I for got code to do? Thanks
Hi I have a r87 and it just keeps canceling it won’t play the record comes down and then lifts it back up again and the cancel light stays on any ideas I just got it and trying to figure it out, it’s my first jukebox
The R88 is playing fine for about 30 minutes, then the player starts to play the next selected record but the tonearm returns to it's off position and the record returns to the magazine. Now the record is put on the turntable again, the tone arm moves to the beginning of the record, then the tone arm returns to it' s off position. The record returns to the magazine again, and put it on the turntable again, with some 'force' this time. Then the strange cycle stops. The jukebox then shows a E-3 error in the display. What is happening here? I removed and re-installed all connections but the problem remains The Central Computer has the upgraded main computer chip
Good day, I do not know if you could help me, buy the rowe r87 and the problem is that the board that selects the songs from number 6 to 0 do not work, what would be the part that I have to replace and where can I buy it?
My r93 is showing error 4 but it still works I belive the battery is bad I have set it to free play When I shut it down and power it up it's no longer on free play but money mode
Hello, I have a Rowe friend from 1980. I bought it in Germany from a restorer, all redone after a move. My son got it going again, but there were discs loose under the platter and the selection arm was stuck in the air. Everything works except that could you help me find out where the problem is coming from. Thank you, how do I unblock the arm?
Hi, I have a rowe ami r94, it worked perfectly until yesterday, from today appears on the display er 39, what does it mean? Can you help me understand what it depends on? Thanks in advance for your reply.
My 1978, AMI-ROWE is set for Auto-play and won’t accept input selections. How do I fix this to accept manual selections? Thank you in advance.
Wonderful job! I have a clue as to how to proceed. Thanks.
Do you have some way I can contact you? I don't mind sending you parts, etc. but really don't know where to start. My jukebox is on and running, but it will not let me make a number selection at all. There is some type of disconnect between the numbers on the front door of the cabinet and the machine itself. And, no error code ever pops up.
Great presentation. I have learned a lot from you but I have a question. Sometimes when a record is playing it will stop and then go again. I have a new needle in there along with a new belt but it still happens can you please help me? Thank you
Do you have anything on the Rowe Diplomat?
At 10:24 you show the transfer motor...where is it and how do I remove it?
I have an AMI Rowe 90 that was working perfectly. Today I turned it on and gave ERR9. Any help would be so appreciated!
I am also getting a err 9 as well. I Can’t find anything online!
I have a rowe 90 that has code 30 and 32. I watched and followed your video that says how to clean the optical. I have a home light, but no switch light. Bad switch or board? Any way to determine what one it is?
Can you tell me when the machine is not in use where the hand should set that picks up the records should’ve sent right over the top of the record or should it be sitting in between the records where the numbers are ?where should the arm be resting when it’s not in play?
The gripper arm should be over the record when jukebox is idle. If it is over the numbers it is out of time.
suprb6970 That’s what I figured 💩
My machine just makes a humming noise when I power it on..I’m assuming the Carousel and arm have both been bumped outta alignment.
It’s a mission trying to find a repairman too. 😭
Ty for replying!
@@lorijohnson8660 Jukebox repair men are hard to find these days. Look up some vending companies in your area, they can usually point you in the right direction. I'm in the Dallas area if that helps.
suprb6970 I have called soo many ppl/places, I’m not giving up tho! I’m in Michigan..😎
Hi! My students won the jukebox in our school for a month but when we wheeled it to my room, it doesn't work! I plug it in and the small decorative records spin and the numbers for selections, selections return light up. But when I drop in a quarter, it doesn't go anywhere. I don't hear it drop. I tried a dollar bill and it came back out. No one seems to know what to do.
Any suggestions?? Please? My students are so disappointed. Thank you!!
I have a r-91 and there's no sound only on the record when it's playing but I don't know how to turn up the volume. Everything is plugged in and I don't know what to do.
Hi, I have a Rowe r86 and the turn table doesn't rotate....be 4 it used to constantly rotate for few minutes then stop. Then it worked great. Can you help me? Do you sell parts? Please lmk? Thank you
Ps, do you have a way of contacting each other?? Thanks again!
I have a 1100 1976 Rowe International and the arm that picks up the records wont work what can i do?
Error 1 on Rowe 93 CD combo,replaced battery ran for quite some time,error code is back, battery issue again ? Or solder joint? Also can a data dump help? I for got code to do? Thanks
Hi I have a r87 and it just keeps canceling it won’t play the record comes down and then lifts it back up again and the cancel light stays on any ideas I just got it and trying to figure it out, it’s my first jukebox
I have a Rowe 86 showing error code 1. When it's on it will not let me select a record but in service it will please any idea what should i do
Hello, I have a Rowe R93 my toggle solenoid stays entergized than it go into error 39
where is the sensor located for erroer code 30 32?
The R88 is playing fine for about 30 minutes, then the player starts to play the next selected record but the tonearm returns to it's off position and the record returns to the magazine. Now the record is put on the turntable again, the tone arm moves to the beginning of the record, then the tone arm returns to it' s off position. The record returns to the magazine again, and put it on the turntable again, with some 'force' this time. Then the strange cycle stops. The jukebox then shows a E-3 error in the display. What is happening here? I removed and re-installed all connections but the problem remains The Central Computer has the upgraded main computer chip
My jukebox shows code 0101, would you please tell me what’s means.
I have a Rowe r86. I think it's showing a error code 8. I can't get any movement from the turntable or the arm. What could this be?
Good day, I do not know if you could help me, buy the rowe r87 and the problem is that the board that selects the songs from number 6 to 0 do not work, what would be the part that I have to replace and where can I buy it?
^min 25 seconds: Fact - a CR2032 battery is NOT soldered to the circuit board. It clips in a battery holder.
6 mins 25 Seconds
Hello. My jukebox keeps skipping on all lps
These jukeboxes don't play LPs
Where can you find a battery holder
What does error 2 mean?
Can I send you the board that battery is located on for you can replace the battery an everything else on it
How does someone reach you
My r93 is showing error 4 but it still works I belive the battery is bad
I have set it to free play
When I shut it down and power it up it's no longer on free play but money mode
Code 30 was kinda glossed over…that’s the one I’m getting.
Where is the service button?
hello do you have an email to write to you?