ALP or Assembly Language Program to find out Largest Number in an array using 8085 microprocessor/ REPLACE THE JNC INSTRUCTION BY JC TO GET PROGRAM FOR SMALLEST NUMBER/ programming tutorial to get largest number.
+Sanjay Thakur 2050H is simply a number it depends on program how do you use it if you are using it as a 16 bit data then u can consider it as a data. In a program it can also be used as an address. And yes for addressing mode point of view it is a 16 bit data.
+Kaushiki Chatterjee one way is to write a program for descending order then store the 2nd value of descending order as a result. There may be otherways also...
+Fadi Zidi No as we have used 8 bit register to set up a loop it can have maximum value 255. Beyond that it will not work you will have to use a 16 bit register for a program having large number of data. Delay using 16 bit register program may give you idea how to implement 16 bit register to set up a loop.
+Gaurav sonawane 1)- you will have to write the code 2)-enter the number of data and data in subsequent memory locations 3)-run the program 4)-go to the memory location next to last data you will get your answer I hope it will be helpful.
![[UNCUT]"ทนายตั้ม" แฉยับ! ความลับสวรรค์ ใครคือ "บิ๊กเทวดา" ของบอสพอล l คนดังนั่งเคลียร์ l 15 ต.ค. 67](http://i.ytimg.com/vi/ru9fpSaUwdA/mqdefault.jpg)
Best video in the internet 👍🏻
very good video sir
Thank you sir !!for such a convincing and worthful video .....i understood everything.👍
great explanations thank u sir for providing this video.
Thanks for watching
make more videos sir..very helpful
thanks for watching. you can check my 8085 microprocessor series on my channel here th-cam.com/play/PLWdpu3kSIiK0toH7d3XrSgP9Y69nPFcKI.html
@@Videh can you suggest me an android app to perform these type of programs in order to check whether the programs are correct or wrong
not tried on mobile...
another useful one!!!
+Harshit lomas thanks for watching. Which university???
Thank you so much Sir for such a nice explanation. It helped a lot. Thank you again. :)
Your Explanation is perfect.
finally, my concept is clear now! thank you so much, sir
Good job man!
I HAVE ADDRESED 3050 IN MY LOCATION AND ENTERED 5 DATA MY RESULT SHOULD BE IN 3056??? IF IT IS NOT THERE
Yes it should be at 3056H but do not forget to put this address in your program also.
Thanks for watching..
Sir please add more microprocessor programs
very clear explanation, thanks
Is LXI 2050 is not a data bco's it's a type of immediate addressing mode?
+Sanjay Thakur 2050H is simply a number it depends on program how do you use it if you are using it as a 16 bit data then u can consider it as a data. In a program it can also be used as an address. And yes for addressing mode point of view it is a 16 bit data.
@@Videh sir thanks for clarifying...
Sir aap ne B ki value drecrement kyu ki... kya aapne B ka use kare ke loop create kiya...if u have some time then answer it plz
+Aniket patange exactly. You got it right. B is used to create loop..
Thank you sir..
+TANGUTURU VENKATA SIVANAGI REDDY URK18CS136 Thanks for watching.
If b =3. Then we have to initialise it
Great explanation!
if we have more than 3 numbers.. will the procedure be the same or different? plz reply fast Sir
+Feriha Khan this program is true for any number of data. So for 3 numbers it will be same.
Thank you Sir
Perfect explained...
Sir if we also want smallest number in the same program then how to go for it?
+Fahad Shaikh just replace the instruction JNC with JC and it will be program for smallest number.
Sir, positive aur negative number check krne ke liye program bnaiye
+Malti dhurve i shall upload video on this topic very soon.
Sir plss can you tell me how to find second or third largest no.plss sir..
+Kaushiki Chatterjee one way is to write a program for descending order then store the 2nd value of descending order as a result. There may be otherways also...
@@Videh sir actually the question is find kth largest no. Among set no.s ... without sorting
Thanks bhai😊
Thank u👌
Want video in Bcd to hex code using 8085
Nice
Please sir what if i have 300 nomber did this programme work ?
+Fadi Zidi No as we have used 8 bit register to set up a loop it can have maximum value 255. Beyond that it will not work you will have to use a 16 bit register for a program having large number of data. Delay using 16 bit register program may give you idea how to implement 16 bit register to set up a loop.
Videh thank you so much could you help me today with this programme ?
If you want send it to me in the email please sir and thank you so much
Videh plz help me to trace output
i am writing this code as it is but i dont know how to see output
+Gaurav sonawane
1)- you will have to write the code
2)-enter the number of data and data in subsequent memory locations
3)-run the program
4)-go to the memory location next to last data you will get your answer
I hope it will be helpful.
Videh in which job it will help
Sir ap ki video hindi me nhi hai
Bayya for smallest no
not very clear explanation