This could POWER Eagle to 5300HP.
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- With fabrication coming to an end we started laying out wiring in @CleetusM Eagle. With the help from Omar from Area51 race cars and awesome products from @FuelTechUSA this thing will be awesome.
Merch & Parts:
cjracecars.com
Social Media:
IG: / cjracecars
FB: / cjracecars
For Business Inquiries ONLY Please Email:
CJRaceCars@algebramedia.com
#CJRC #CJRaceCars #CameronJohnsonRaceCars
Maybe we will get to see if this thing will make that 5300hp now 😎😅!
Fingers crossed!
Will be there abouts
Yes, 100 percent would love to see this thing on on a hub dyno
Looking for 5400HP!!! 😇
I was wondering if cleet was gonna stay with Holley or upgrade to fuel tech. Made the right decision
Thumbs up for Omar. Being put on the spot (and camera) to give us the details is very much appreciated.
He has a TH-cam channel with 90k subs.
@@higgy82 he def doesnt look like hes use to being on camera tho lmao
@@higgy82 Whats his channel called ?
@@JestaBl1tz
It is literally in the description.
@@JestaBl1tz might try area 51 race cars
I appreciate so much that the Area51 dude isn't a sales man, he's literally there to get the job done, not super confident and cocky on camera makes me think he knows more than what he shows, versus those who show more than they know.
As an electrical engineer, this is my favorite one yet. Love the content. I have seven years until retirement and plan to wire race cars once I retire. I'm building a 60'x40' garage for that venture.
What's your 10-20? where you going to be running your business out of in retirement?
@@rogerrandolph9685I’ve only heard it said as ‘what’s your twenty?’ and mostly over the CB back in the 70s & 80s, which makes me think it is like 10-4 and proper usage like is 10-20.
I have the upmost respect for auto electricians, or wizards as I like to call them lol
@@rogerrandolph9685 I believe it is called the 10 code
IF KAMAL gets in there will be no race cars left by the time U retire...........Vote wisely......Get your family and friends to vote........Wishing U and yours all the best.
Cleeters got some top shelf guys building his dream car!
And I love how it’s helping them build a larger audience. These guys are awesome at what they do, and now we get to see why ❤
I wish to see him more often during the builds changing ideas on the spot.
@@Christopher_Rnot only why. But more good content to see. This guy's build top of the line race cars
And imagine the speed that boy is gonna be moving at.🦅🦅....SSSSHHHHOOOOO WWWWWWEEEEEEEEE! do it for dale!
oh man, i WOULD NOT want to be trying to build a one off harness without being able to lay hands on the vehicle at the drop of a hat, it says a LOT about how well Omar knows his shit that he seems confident he will pull it off without too much trouble
He’s done a lot of our cars and they are similar. But definitely wouldn’t normally want to do that.
There are numerous top level wiring guys who can build a custom harness remotely with the correct information.
Boostedboiz Wyatt is a wiring demon
Omar knows his stuff for sure. He wouldn’t be working on quarter million dollar cars if he didn’t know what he was doing.
I'm really curious to see how he does it. For wiring jobs I've done, admittedly far less involved, I've made the octopus but left a lot of the legs long and just terminated those ones in the field. Takes a lot of the pressure off.
Edit: Should have kept watching - Omar confirmed that's exact how he's going to do it.
This car is getting the kitchen sink thrown at it, top of the line engine, electronics etc. This car is going to be a hell of a piece of kit when it is done. Can't wait to see it, awesome job to all hands involved.
Having Omar in the video was amazing, his attention to detail is a perfect fit to help get the car completed.
18:50 This man gets it.. "You just send it!"
That is Cleetus 100%
Oil pressure? What oil pressure? Send it! "Cleetus" lol
Totally was thinking the same thing...
They was talking about AFR when them boys don’t even worry about oil pressure 😂
@@Tomford.888. He has a point though, you dont really look at the sensor gauges mid run
I think you got the right wiring guy. Very impressive. Can’t wait to see what he comes up with and in such a short space of time
He’s definitely the man with this stuff
Amazing how much expertise is coming from all angles for eagle.
shows just how much goes into these builds
Remember when the car started as a #1 bar on the chassis table…
For a quarter million dollars, I wont expect anything less.
@@kasarnflahe’s probably more than that into it the engine alone is 75k to 100k
@@Ironn199er Im just going by what came out of Clets mouth. I dont speculate..
Cameron: I don’t know if I could sleep at night if that sticker was upside down. Your OCD is commendable sir, I salute you.
Thank god that I'm not the only OCD one! That would have killed me!
@@tomcoon9038 😂🤣
Also liked the fact that the wiring dude had the reverse stickers ready so that there would not be an issue :)
Same. I would have spent hours looking for a spot where it would read right side up. Never would of thought of adding a new sticker in the correct direction
@@BDR920😂
"If that sticker was upside down, I don't know if I'd sleep at night" 😂😂 Love how Cameron and his team only build the most quality and detailed cars. Love seeing the perfection in fabrication and all other areas in these CJRC videos.
Best thing was to film Omar.. That man sees things and his brain is already forming the harness as he’s pointing. Super talented professional people all around on this machine at every corner. Even if it never made a hit it’s gonna be a gorgeous looking piece of art to be proud of. Of course I’m sure it’s gonna be a rocket. Can’t wait to see the completed unit, although these updates are great!!
These men are all so knowledgeable and gifted. It’s incredible to watch you all just excel at your craft.
this has been one of my fav youtube series to watch.
Finally Cleatus will be running Fuel Tech! Anderson and his crew are amazingly smart and innovative!
Edit: Oops, I was thinking McFlurry was fueltech but it's Haltech
@@wingracer1614mcfurry?
@@j_wide583 Oops again, fixed. But in the words of Andrew McCuthcheon, "Furries..."
No regards to Cleets wallet at all on this build. Best of everything. Cant wait till its done.
For real. Building this $400K+ car and now he’s starting what has to be $1M home at the same time. Plus Leroy and all the smaller regular projects. Garrett just bleeds dollars!
@@danmyers9372 a huge part of that is he knows he can make it back, especially considering hes constantly growing even now
It's all content. I wonder what his return on investment is dollar for dollar
Don’t forget the helichopper
@@1nyga multiple…
Getting closer to STOMPING on the LOUD pedal.
Yes sir 💪🏻
It's called smashing the skinny.
Clay just won US Nationals ........ g'day from Oz ........ Read Bros country !
It’s so awesome to see a car of this caliber built by hand at every step. Absolutely amazing guys.
Put your respirator on, dude!
These guys are top notch!!! This is so much work. And the way there is always at least two guys, talking there way through the process is something I’ve never seen. Looks like more shops need to follow suite!!! Nice work team!! 😮
I like that Area 51 guy. It's always great to work with someone that knows their shit.
Scary amounts of work. Truly a piece of art.
The details on the electrical are much appreciated. Even FT videos are mainly sales videos, not much how to detail
A minute into this video and you can tell these two know a lot. The knowledge between them is crazy.
Dont forget to add lights for the Christmas tree drags. Im sure ol Cleet would appreciate that lol
From my point of view this looks like a bunch of FUN by my experienced mind tells me how hard all this work is, especially with this deadline your up against..Day in, Day out... .All this work so a MaD MaN can go 5.xxx seconds in a quarter mile...
Best Wishes to you and your team of highly trained professionals who have been kind enough to share with us their many years of "Precision Fabrication" skills.... You guys' rock !
I've always found wiring up stuff new from scratch to be quite enjoyable. What sucks is trying to fix someone else's rats nest. In those cases I've been known to just rip everything out and start fresh. I've never done anything quite this complex though.
Fantastic choice going with Fueltech. I’m running a FT550 in my street car. There an amazing unit. Especially the touch screen.
It’s getting close. Well done CJRC team.
"i won't sleep at night if the sticker was upside down"
Craftmanship and pride!!
Talk about Christmas in September. What did we do to get so lucky to get so many videos. I love it!!! Close to first fire up🔥🔥🔥
Hyped for eagle and the lambo swap!
What a great compliment to the detail that your crew applies to these builds. Omar's talent for detail and clean design is really quite amazing. Thanks for sharing details like this on the build . I am developing a real appreciation and admiration for what all of you put into this. THANKS!
Once again the sheer professionalism shown in this build is mind blowing.
We always utilize a clean power bus and a dirty power bus. The clean power bus is only for pure electronics. The dirty power bus is for anything with a coil, such as fuel injectors, ignition coils, starter, alternator. If you only utilize one bus, every time a coil deactivates it can throw a power Spike onto very sensitive pure electronics.
Smart
How do you isolate them?
2 separate pos bus bars/fuse blocks
Microcontrollers do not like transients caused by collapsing magnetic fields.
Clean bus negative should only be connected to battery neg, never to chassis ground. Chassis ground is for dirty bus.
@@ky8465 Thanks for replying. I understand the induced dirty voltage. Im just curious do both busses just simply connect to the battery + . Will the battery absorb the spikes without sending them down the clean side?
Cj looking good, big shout out to Omar for coming through for the wiring so we can all hear it run soon. This car is going to be a beast, hope clletus can handle it lol.
I want Area51 to wire my Supra now. Best commercial advertisement I’ve ever seen.
FUEL TECH...... finally ;) LETS GO BOYS !!!!!!
Need to get this car to fuel tech head office for a dyno. that video will be wild.
This guy is amazing. Listen and watch cause wiring is hard as hell. So when u bitch about how long it takes to wire a race car. U will know why it takes so long and how expensive to wiring. When ur pulling three miles of wire, a single wire at a time it might be time consuming.
Absolutely
I still think it would be cool to have a plexiglass viewing Port over the turbos.
😅
@@CJRaceCars you can't tell me Cletus wouldn't be excited to see those turbos. LOL you guys are awesome and I love your videos.
@@towoperations oh I’m sure he’d love it lol
The hot side exhaust looks so wicked. All of this build is just so amazing.
I know one thing, y'all damn sure take pride in your work , and damn it looks good
Omar is king in wiring and stuff like this. Ive seen i think 2 pther cars be wired by area 51 and the fact he thinks about the car as a finished product before theres even a single wire in the car, is crazy! I could not do what he does. Wires and i are not friends but he made it seem so simple
Omar has some work to do. I dont envy him but i sure do respect him.
💪🏻
I know fueltech is super popular with promods and specifically hemi guys (world record dyno run was using fueltech for ex) but I've always been really impressed with haltech's stuff. Maybe it's just all the rob dahm I've watched.
I think it’s likely because Fueltech is right across the street from Proline so they pretty much do all Proline engine builds. And we all know how big Proline is.
I'm personally Haltech biased - but ya gotta hand it to FuelTech with that unfair advantage with their US location😆
The amount of money in this build is mind blowing! Cleetus is smiling and crying at the same time watching these videos. 😂
Who else can’t wait for Leroy’s reveal!?!? 🙌🏼
This is NOT Leroy
This is an entirely new car front to back. Leroy is in cleetus's shop. It's just getting a new body
@@lnr12241yeah no shit! We’re all waiting to see what Leroy looks like with the new body on it. CJ has it at his shop.
@@lnr12241 CJRC are doing the tube work on Leroy to mount the new body dude.
Try to keep up bro 😂
@@Aaron_Hanson dude wasn't talking about that. He was talking about this car. And he asked for likes which is lame to begin with. Now you're just as lame for defending him
That was so interesting to watch and listen to. Fuel Tech always innovating, mad props to Omar and Area 51 race cars.
19:30 'Let's work hard and see'
Making a harness all the correct length and nicely packed together must be a pain in the butt, but so satisfying when the final thing is lookin' cleeeeean
Please contact your local Industrial Hygienist to make sure you're using the best respiratory protection.
Yea umm, I was pretty concerned about him grinding on that Carbon Fiber without a mask. My age is showing because when I was his age, I wasn't concerned either. But that stuff is nasty on the lungs.
*You guys are absolute legends!! I'm really glad I was able to find your shop/channel through Cleet! You guys amaze me!! This has been a very enjoyable journey to watch and will definitely follow the next project you guys do!!*
the nano in the engine bay is a great idea!
Just phenomenal job Cameron. All the best people coming together to build a hell of a car. Thanks for sharing!
That engine bay mini screen is sick!
All of y'all crushed it on this build🦅🦅
CJ race cars works great with other vendors obviously top notch PROS!
Thank you for the every update of the Eagle. Surprised to know there are so many sensors and wiring to run this kind of Hot Rod !.
Get Omar a couple beers, he seems to be an exceptionally valuable resource!
It is so awesome to watch and listen to people who know their craft. It’s unbelievable how knowledgeable CJ is about all the parts of these cars. Omar was very knowledgeable as well, you guys truly work with the best.
What I love about this is that clearly CJRaceCars know the best and a few seconds of hearing about the wiring harness and the cool engine bay tech. Well I am simply impressed, Cleetus has got some cool stuff coming and I bet some of it starts filtering through to his other builds.
Bro, you gotta wear a respirator...
I came to say the same thing. That shit will cause all types of respiratory issues.
came to say the same thing as well. That shit is no joke.
Seriously, he's gonna fuck his lungs up FAST doing that without a respirator. Even if he thinks he's holding his breath and not inhaling any while he's working, disturbing anything with dust on it and breathing nearby is going to get some in you.
COPD is no joke
Yeah I work with carbon all the time and I would never cut it without a respirator
Love the synergy between you and Omar ....... this is what your customers are paying for....... real professionalism ........ g'day from Oz !
Details,details,details! This build certainly shows us how these cars cost as much as they do. Experts from all fields converge to create Eagle, I love it. Many , many thanks.
I never minded the cuffs of my ATGs. Now I do. It makes me a better man. Thanks, Taylor!
I received my pre ordered shirts, and they are awesome. Thank you CJRC!!
Thanks for taking us along with this build.
I can't wait to see how it comes out and runs in the 1/4 mile.
I love the fact we get to see the small things that you used to help Cleete with his other builds on this build + more. It’s crazy that I fell in love with cars but this is another lvl of art going to 5 second drag cars from drifting..
It’s amazing watching professionals of their trade 👍
TALENT!!! You guys are very gifted. Cool to see you coaching this build. Putting the right guy on each task. Lord has blessed you fellers.
Gonna be top notch! Managing those builds takes a lot of time. You are doing a great job!
Absolute monster y'all are building, cant wait to see what she does down the strip
thanks for the share gentleman.
I can't wait to see/hear this thing fire up for the first time! That electronics/wiring dude is brilliant with his ideas!
Another amazing video...cleetus is going to be a very happy man!
FuelTech hub dyno video coming in November. Can't wait.
I love how everyone in the shop shares the same perfectionist trait. 😂
May take a little long but you know it’s going to turn out perfect. 👊
The amount of work put in to fit and finish is amazing
Omar tuned my evo8 and is an absolute pro! Excited to see him get some screen time!
Homeboy is Zacks new best friend lol. Hope Zack has plenty of wiring questions ready lol
Having that much confidence with a custom wiring layout with an off-site project is madness. That dude is a G
As a brazillian, i’m so happy to see cleets using a Fueltech! Let’s gooooooo 🇧🇷🇧🇷
Omar’s got mad skills. That man knows everything there is about professional wiring in race cars and it shows.
Really cool seeing a pro spec out the wiring!
Just my imo, i feel that fuel tech is already rocketing in customers… however this early sign (before cleets announcement) is a key sign and testament to the software and adaptability achieved from these guys
Finally Cleets gonna experience the fueltec difference 💪💪
😂
I just love the detail. Excellent job.
Finally Cleetus is gonna have a car powered by FuelTech. Was hoping this day would come
the amount of thought that goes into building these beast is amazing.
I just love what cleetus has done for channels over the years, like with steeve Morris, gets decent as views now and subs, this channel is only going upwards too
Plus, Another great opportunity to learn something.
This project must have the FT700 down the road. its pre-order now but I am 100% positive that fueltech are welling to sponsor cleet for a kit to test out.
WOW to say the least! Omar and his forward thinking mind is definitely the kind of guy you want on your team! Impressive video listening to him go over all the goodies!!
Dude you got some top quality help. Thanks for sharing on TH-cam.
Damn Omar is a humble genius with a nicely refined work flow. A true professional.
That's so cool to see how all that works and how technical the wiring harness really is in order to do it right. Love the content!
Great progress update!!!
I am very impressed at the detail you and your team put into your cars. It's amazing to see this kind of detail and care go into a race car. Well done guys!
So happy he's going with fuel tech .. I use Holly alot but the first time I used fuel tech I was in love....and their customer service is by far the best
Omar is a professional!