How to make No Go areas with the user chart | FURUNO ECDIS tutorial |
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Maritime training for professionals!
⚓www.furunotraining.com
⚓fmt@furuno.dk
⚓(45) 36 77 40 12
In this video, Morten will teach you how to make no go areas with the user chart. If you have any question for us, please leave a comment.
Hi sir, good day, I think it is unsafe to lower the safety contour if that was the result of your calculations with respect to the present draft, squat and other parameters. It would be much better to keep the contour at 6 meters and after that, draw with the users map the no go areas even if it is inside the safety contour in the ECDIS. That is just my opinion.
Hi
Thank you so much for writing to us and sorry for the late reply.
And thank you for your critical response, that is great.
You are correct, it is not safe to lower your Safety contour, but you should always remember that your Safety contour is a dynamic value, which should fit your circumstances, without risking a grounding.
Take care of yourself, and have a great day
Kind regards
Morten
Thanks for the Videos
QUESTIONS 1) Is there a function of Alarm/Warning/Danger line (Like JRC) in User Map
2)What is the format of route in FMD 3300,
3)Can Manual Update be transferred with another ecdis
4)Can User Chart be transferred from one ecdis to another and how
Hi Saurabh Kumar
Thank you so much for writing to us, and thank you so much for watching our videos 🙏
1) Yes you can set almost all the objects yo can draw in the User chart can be set as danger symbols.
2) You can choose between RTZ, CSV, ASCII
3) No I am afraid not
If you have more questions just write to us, or come with suggestions to our future youtube videos.
Take care of yourself😀
Kind regards
Morten
Great job for learners. Much appreciated.
Hello. Any idea why only one unit of my ecdis has off track alarm? The other does not alarm?
Dear sir. Can we combine the two passage plans woth their selected waypoint in order for them to be in one only.
Hello , thanks for videos Great job .
Question ..Error "AIS LOST 193" constantly appear on 1 ecdis ,(i have two sincronyzed ) Can you advice what is the problem .
Thanks in advance
Hi Blackpearl
Thank you so much for that feedback, that is really great of you.
Cant your alert in our system, so cant you take a screenshot of it the next time it appears and send it
to fmt@furuno.dk, thank you
Take care of yourself
Kind regards
Morten
@@furunomaritimetraining Thank you
hello! can you please make a video of how to export the route waypoints? thank you !
Hi Laur
Thank you so much for watching our videos, it is really great. And thanks for writing to us with your question.
I will take it up in a video of course.
Have a wonderful day
brgds
Morten
Hi sir in FURUNO FEA 2107 how to make on NO GO AREAS? Thank you.
Hi
Thank you so much for writing to us and sorry for the late reply.
To answer your question.
You can use the User chart Area or line to make No Go areas in the FEA ECDIS.
To open a new user chart, Click on User chart in the information area, then click plan, then click create, then click the area or line tab and check enable changes, then you can start editing your No Go area.
I hope my answer could help you.
Take care of yourself, and have a great day
Kind regards
Morten
Hi there! Can you advice how can we mark the "Abort Point" and the "Point of no return" on charts? Thnx!
Hi Robert
Thank you so much for writing to us, and for watching our videos.
Thank you so much for that good question, i will take it up in one of my upcoming videos.
Take care of yourself, and have a great day.
Kind Regards
Morten
Hello, i have a question. For example i have boarding position with exact coordinates, how do I set my cursor in exactly that position, without scrolling and painfully adjusting cursor by using trackball?
Hi
Thank you for your question. we really appreciate it.
I will also show this in a future video. but for now do as follows, since Furuno do not have a function
where you can enter a position and then the cursor will move there.
click WGS84 button, then write the position under source and press Go To, then the cursor will move to that position.
Hope it where a help, have a great day and Happy new year
@@furunomaritimetraining thank you I will try it! Another question, i have ticked wheel over lines in my settings, however, no any wheel over lines are drawn on my route! Maybe i have missed something?
Can you make a video on how to create a passage plan on furuno ecdis as I'll be using Furuno ecdis first time as 2/Off.. Urgently need a video on the above topic
Hi Rahul
Thank you bunch for watching our videos. and great of you to send us a suggestion for videos
I will take up this subject in a video of course.
Have a great day
brgds
Morten
Hello happy New year! I have a question about navtex on ecdis, if on ecdis I will see wrong position from Navtex is possible to edit and make the correction or not? I check on Manual and not have any instruction. Also for any other info can I send to you mail?
Hi cpt_xoulio91
Thank you so much for watching our videos it is really great. I will make a video about the Navtex in the future, but please write to me at mbs@furuno.dk with your problem, and I will try my best to give you an answer.
Have a wonderful day
brgds
Morten
@@furunomaritimetraining thank u a lot Morten!😊.. You are doing a good job with the videos!!
Question? specially alarms sound on ecdis during for sea passage one time I acknowledge it.can you give some reasons
Hi
Thank you so much for watching our videos, that is really great
Please just write, if you have any other question.
Take care of yourself
Kind regards
Morten