Hello, Does E-type(4 rows) needle plate and feed dog(149057) fit in this machine eg. e18,20,22...or H26. I have a similar machine to this brand but an older model clone to Singer 103k its available in our place under the name Ta1-103k or Umbrella sewing machine. I did fit the said needle plate in my machine with some shifting in the feed shaft and the maximum stitch length i can sew is on 4mm (the fork holding the feed dog hits the feed shaft) but the reverse doesn't work on 4mm the feed dogs hit the needle plate though 3mm and below stitch works fine. And i can't seem to center the feed dog (i saw some tutorials about Juki ddl machine that the feed movement from front to back should be equal) but this hasn't given me any problem in stitching. The thread tension in upper and lower thread works well. Thank you for uploading this video, only after watching this i felt sure that the Extra Presser foots would fit my machine; though i bought some different ones eg.CR1/6-1/4,CL1/16-1/4, SP-18 1/16-1/4-3/8 etc... and also the folder though i purchased A70 hemmer folder otherwise most of the sellers online said these fit only auto oil machines like Juki, Jack etc and not for foot operated treadle machines. Oh! i forgot to mention you have a very beautiful machine, what i love about this is the body is similar to that of heavy industrial sewing machine and the top bobbin winder that can be opened to check on the feed shafts, gears etc.
Hell, Your Singer 103k is fashionable and nice. I'm sorry. I don't know which one fits. We recommend that you inquire about compatible parts at a sewing machine specialty store. Sometimes the parts of an industrial sewing machine can be used in a professional sewing machine, but in other cases it cannot be used. It would be nice to find a feed dog height and needle plate that match the sewing machine. I'm sorry I couldn't help you with the compatible parts.
@@kabankoubou-ake Thank you for replying and don't be sorry, you've helped me a lot already. Otherwise up until now i only thought the Ta1-103k/Umbrella( sometimes its even called full shuttle sewing machine in some states in our place) were the only straight stitch semi-industrial foot treadle machines available next to the heavy duty motor sewing machines. And was this machine available for purchase in stores because at first i thought this was a new model, but upon doing some research i think this a 1980-90's model and i also found Brother and Juki sold similar models( TA2-B621,B622,B623 and TL-72,TL-82). Hope one day this machine will be available in my place haha... i'm being very optimistic because my machine which i think is a 1940-50's model is still being sold and the singer 188 pro is basically the upgrade which i hope for like; 1. The shuttle hook rod/shaft looks bigger(like the one's for 7.94 rotary hook) which i feel is good when using thick threads particularly when sewing denim and other thick fabrics. Mine is as 5.53 rotary hook machine though i can use heavy threads but sometimes it feels heavy. 2.The bed mounting screw holes for folders( i had to get mine drilled and tapped). 3.The removable back top head/bobbin winder plate which give a clear view to tighten screws, clean, replace parts or check for wear and tear. 4. The side spool holder which gives us the option to use big cone threads Regarding specialty store there are none in my place only small retail stores that also they either tell you to purchase high speed or foot treadle and i currently prefer foot treadle, its convenient when there's no electricity, we can control the speed and also provides some sort of leg exercise. Sorry for the demand but if you later plan on using an e-type or h-type needle/throat plate please make a video about it. Thank you.
@@wabanf Hello. Thank you very much. I also love this treadle sewing machine. The sound when stepping on the sewing machine is also comfortable. Older sewing machines have a retro feel and are more durable than anything else, so they are sold as second-hand sewing machines, but I foot sewing machine is of a small number is a drawback. Also, if I have a chance, I will upload E type and H type videos. Thank you very much.
チャンネル登録しました！
たまたま家庭用ミシンの修理のことで訪れたミシン屋さんにこのミシンと同じ物があり、そのフォルムにほぼ一目惚れ！❤笑
最初はやや悩んだのですが、ミシン屋さんのトークも今思えばお上手でした。
かなりお安い値段で手放してくださいましたが、私なんぞの腕前では元を取り戻すのはいつかなーと。
でも購入してまだ２ヶ月足らずですが全く後悔しておりません。
しかも、この動画を偶然にも探し当てることができたのがラッキーでした。
下糸の巻き方や圧力調節など配達してもらった際に説明をうけましたが、しばらくすると自信がなくなり、取扱説明書もなかったし、こんな重いミシンを車に積んで教えをこうわけにはいかない(^_^;)
ミシン屋さんに我が家へ来てもらうのは正直面倒だし出張費云々含めて億劫だし。
薄い生地ばかりではないので、裾の三つ折を縫ったりパッチポケットを縫い付けたりする時の安定感が素晴らしいです。
家庭用ミシンとの差に驚くばかりです。
既製品の方が安上がりかな、と思いつつ、縫い上がった服はたいてい着用できるし（あか抜けない代物ですが）やる気スイッチ入ってる時は自分しかわからない喜びがあります。😊
家庭用ミシンとのメリット、デメリットを考えながらソーイングライフを楽しんで行きたいです。
コメントありがとうございます。
そして、お返事が遅くなり申し訳ありません。
同じsinger職業用を購入されたのですね。
家庭用ミシンでは色んなステッチ縫いが出来ますし、家庭用ミシンも持ってて損はないですよね。
この動画がミシンの使い方にお役に立てれば幸いです。
これからもソーイングライフを楽しんでくださいね🥰
Hello,
Does E-type(4 rows) needle plate and feed dog(149057) fit in this machine eg. e18,20,22...or H26.
I have a similar machine to this brand but an older model clone to Singer 103k its available in our place under the name Ta1-103k or Umbrella sewing machine. I did fit the said needle plate in my machine with some shifting in the feed shaft and the maximum stitch length i can sew is on 4mm (the fork holding the feed dog hits the feed shaft) but the reverse doesn't work on 4mm the feed dogs hit the needle plate though 3mm and below stitch works fine.
And i can't seem to center the feed dog (i saw some tutorials about Juki ddl machine that the feed movement from front to back should be equal) but this hasn't given me any problem in stitching. The thread tension in upper and lower thread works well.
Thank you for uploading this video, only after watching this i felt sure that the Extra Presser foots would fit my machine; though i bought some different ones eg.CR1/6-1/4,CL1/16-1/4, SP-18 1/16-1/4-3/8 etc... and also the folder though i purchased A70 hemmer folder otherwise most of the sellers online said these fit only auto oil machines like Juki, Jack etc and not for foot operated treadle machines.
Oh! i forgot to mention you have a very beautiful machine, what i love about this is the body is similar to that of heavy industrial sewing machine and the top bobbin winder that can be opened to check on the feed shafts, gears etc.
Hell,
Your Singer 103k is fashionable and nice.
I'm sorry.
I don't know which one fits.
We recommend that you inquire about compatible parts at a sewing machine specialty store.
Sometimes the parts of an industrial sewing machine can be used in a professional sewing machine, but in other cases it cannot be used.
It would be nice to find a feed dog height and needle plate that match the sewing machine.
I'm sorry I couldn't help you with the compatible parts.
@@kabankoubou-ake Thank you for replying and don't be sorry, you've helped me a lot already. Otherwise up until now i only thought the Ta1-103k/Umbrella( sometimes its even called full shuttle sewing machine in some states in our place) were the only straight stitch semi-industrial foot treadle machines available next to the heavy duty motor sewing machines.
And was this machine available for purchase in stores because at first i thought this was a new model, but upon doing some research i think this a 1980-90's model and i also found Brother and Juki sold similar models( TA2-B621,B622,B623 and TL-72,TL-82). Hope one day this machine will be available in my place haha... i'm being very optimistic because my machine which i think is a 1940-50's model is still being sold and the singer 188 pro is basically the upgrade which i hope for like;
1. The shuttle hook rod/shaft looks bigger(like the one's for 7.94 rotary hook) which i feel is good when using thick threads particularly when sewing denim and other thick fabrics. Mine is as 5.53 rotary hook machine though i can use heavy threads but sometimes it feels heavy.
2.The bed mounting screw holes for folders( i had to get mine drilled and tapped).
3.The removable back top head/bobbin winder plate which give a clear view to tighten screws, clean, replace parts or check for wear and tear.
4. The side spool holder which gives us the option to use big cone threads
Regarding specialty store there are none in my place only small retail stores that also they either tell you to purchase high speed or foot treadle and i currently prefer foot treadle, its convenient when there's no electricity, we can control the speed and also provides some sort of leg exercise.
Sorry for the demand but if you later plan on using an e-type or h-type needle/throat plate please make a video about it. Thank you.
@@wabanf
Hello.
Thank you very much.
I also love this treadle sewing machine.
The sound when stepping on the sewing machine is also comfortable.
Older sewing machines have a retro feel and are more durable than anything else, so they are sold as second-hand sewing machines, but I foot sewing machine is of a small number is a drawback.
Also, if I have a chance, I will upload E type and H type videos.
Thank you very much.