The old truck is refreshed once again and has new life!! Hanks granddauhters will really enjoy their new old truck with hank and the family working on it. Awesome job guys!!
Nice truck, color is pretty. Squarebody Chevy has a certain attitude, to me they look much better than the newer ones. I had 83 4x4, semi gloss black. It is good to paint the axles and springs glossy black, they are easy to keep clean of mud and dust afterwards.
YOU GUYS DID A GREAT JOB ON THAT Truck it looks 1000000 better than it did when they went to pick it up sorry about the CAPS. I'd be greatly proud to own that Truck great job guys
Looking Good Buddy!!!! Still a few minor things but, This Truck Will Be Back On The Road Soon!!!! At least Hank is Happy & The Twins Are Happy So Far!!!! Keep Up The Great Work Coop!!! I would have never found your channel without finding Hank First!!! I really enjoy your content buddy & "Keep It UP"
You could just try using the rest of the tall body mount bushings from this trucks frame and the good ones for the 84-87 core support and then it should sit right I've owned about 25 different gm square body trucks over the years and most people think they are different from 73-80 and then 81-87 nope it 73-76 77-80, and 81-83,84, and 85-87 and the frame is similarly changing or updated and the body bushing set is different for 2 and 4 wheel drive as well,all of that said i also had a front Dr side core support junk bushing alignment issue but i just had a buddy use a pry bar and pull up on the core support and bolted the fenders in place, and then move the pry bar and ratchet strap the core support to the frame and it was that way until i had the time to get the right 86 4x4 core support bushings and combined them with the c1500 83 GMC High Sierra front clip 2wd bushings and bolts and made it work
@@richardbates2367 yes sir! It was definitely a learning experience this go round. Lol. We did essentially the same thing with the core support to line up the fenders and it finally worked. Sometimes you gotta do what you gotta do 😂
Yessir! I didn’t have enough room in the booth to do the tailgate at the same time so I’ll be doing it off camera. I think they will possibly be spraying the core support when they do bushings!
Coop this looks fantastic! The twins are so excited with all your hard work. Truck really looks good. Distributor may have wire shorting out, or bad coil. Great job.
My new project is I just gone to scrap yard in the UK got the old Beetle so I've decided I'm taking the whole body frame and I'm going to make it into a a Porsche it will take me quite a while to do as the broker helped me is got married and decided to go on holiday but it's best not to rush take your time and you get it done that's why I say well done to you
Coop envy your skills ive tried body work and ahhhhh what a mess had to take it to crash shop to fix my mess😅😅😅 Mate curious Aussie whats your day job are you a panel/paint guy by trade,must be you are clearly good at it .Still not sold on the blue i like BLACK specially on that pickup ,but hey not my Truck😅😅😅 Cheers guys Kym Adelaide
Haha. I’m FAR from a professional, but I’m getting there. I can do far better than I did on this one. If you like black, you should check out my squarebody 👀 but no. Lol. I’m not a body guy by trade. I’m a firefighter/paramedic full time.
BRO FOR STARTER CARBURETOR IS WAY OUT.,THERE''S TOO AIRFLOW MIXERSSCREWS IN FRONT OF CARBURETOR ON BOTH OF THEM TURN THEM ALL THE IN BACK THEM OUT 2 AND A HALF TURN FOR BOTH THAT WILL FIX IT
@@philmcintire8199 thanks man! I’ll give that a shot as soon as I get back around it. It was a brand new one. Just bolted on and haven’t done any adjusting
What about the tailgate? The paint job is really good, you do nice work. It's to bad Hank didn't let you spray the red under the hood and inside the bed all black.
Why wouldn't you spray the backside of the bed? I know you won't see it once the bed is back on but since now it's exposed why not spray it same color??
You should have told that old man (Hank) to get with the program that you don’t do things half-assed. Why didn’t he just buy some new bed sides instead of having you do all of that repair and bodywork?
@@bigslim492 😂😂😂 folks sure enough coming after me for it. I wish they’d look at my black squarebody to see proof of what I can do. It’s a budget build that is gonna be roughed up as a farm truck anyway. They just wanted it pretty much one color
@@CoopsHouseyour work looks good. Anything I’m saying is directed at Hank not you. If he wanted an aerosol overhaul then he should have just had the girls paint it. Good luck.
Hi Coop. On all Chevy 350 and 400 small block engines the best carburetor is a 600 cfm holly or a 650 cfm 4bbl double pump then that gas engine will come to life
@@greasemonkeyDbpDu1965 thanks man! This is a 600 Holley style brawler. It’s backfiring through the carb so I think there is definitely a timing issue somewhere
You could watch the video of it’s entirety and hear us “talk about it” and what the plan is on the rails and tail gate -Hunter, the other guy on this channel
А изнутри кузов покрасить? Хотя бы в чёрный или серый? 😂 Так можно было ничего не разбирать и не шпаклевать. Просто из баллончика на парковке торгового молла покрасить и всё😂
Well the body and paint job its not all your fault its not right a lot is hanks fault i know me if he told me to rush it and didn't care if it looks good one i would have said i will not video and I would have told hank when you come over your not to do Any videoing way your here if you want a sloppy rush work from me or you can just come and pick up the truck the way it is
I wish more people understood that. I actually did more than I was supposed to. But people tend to overlook the fact that I’ve said that a million times. I could’ve gotten it near perfect if I had been given the time.
A few minutes of talking between a few hours of work on our days off from our full time jobs AND running ANOTHER business aside from this didn’t hurt the progress. I promise you. -Hunter, the other guy on the channel
@@ronnierigney8867 people come here to see what we’re doing. I’m not putting together videos of time lapses and not explaining what’s going on. That would make for a boring video. Beside, 2 minutes of talking for 6 hours of work isn’t hindering progress at all. I can assure you that.
The old truck is refreshed once again and has new life!! Hanks granddauhters will really enjoy their new old truck with hank and the family working on it. Awesome job guys!!
Yes sir!!! I appreciate you!
Wussup B!!!! Love that you guys are still out there grinding with content!!! I see a big improvement! - Griff
@@GriffandAlyssa ayyyyeeee wassup bro!!! I appreciate it my brotha! Gotta keep on keeping on! Haha. Been enjoying the travel vlogs!
Nice truck, color is pretty. Squarebody Chevy has a certain attitude, to me they look much better than the newer ones. I had 83 4x4, semi gloss black. It is good to paint the axles and springs glossy black, they are easy to keep clean of mud and dust afterwards.
@@Tom-jf5go I agree! Hard to beat the old squares!
Great job coop! Dub n Zee are pretty lucky to be getting most guys dream square body
Thanks brother! They seemed pretty excited about it!
YOU GUYS DID A GREAT JOB ON THAT Truck it looks 1000000 better than it did when they went to pick it up sorry about the CAPS. I'd be greatly proud to own that Truck great job guys
Thank you!
Happy Birthday Donnie!!!
🎉
Looking Good Buddy!!!! Still a few minor things but, This Truck Will Be Back On The Road Soon!!!! At least Hank is Happy & The Twins Are Happy So Far!!!! Keep Up The Great Work Coop!!! I would have never found your channel without finding Hank First!!! I really enjoy your content buddy & "Keep It UP"
Yes sir! They’ll be picking up from here and getting this thing finished up. Just glad they’re happy with it. I appreciate you man!
You could just try using the rest of the tall body mount bushings from this trucks frame and the good ones for the 84-87 core support and then it should sit right I've owned about 25 different gm square body trucks over the years and most people think they are different from 73-80 and then 81-87 nope it 73-76 77-80, and 81-83,84, and 85-87 and the frame is similarly changing or updated and the body bushing set is different for 2 and 4 wheel drive as well,all of that said i also had a front Dr side core support junk bushing alignment issue but i just had a buddy use a pry bar and pull up on the core support and bolted the fenders in place, and then move the pry bar and ratchet strap the core support to the frame and it was that way until i had the time to get the right 86 4x4 core support bushings and combined them with the c1500 83 GMC High Sierra front clip 2wd bushings and bolts and made it work
@@richardbates2367 yes sir! It was definitely a learning experience this go round. Lol. We did essentially the same thing with the core support to line up the fenders and it finally worked. Sometimes you gotta do what you gotta do 😂
Happy Birthday Donnie
🎉
That thing looks great
@@cliokid49 thank you!
AND THAT TRUCK LOOK GOOD
Thank you!
Happy birthday Donny
🎉
Happy birthday donny
🎉
Great job you guys, fantastic job
@@harveyjohnson2587 thank you brother
Well done
Thank you brother
Nice job looks awesome
Thank you!
Hey coop what about the tailgate and that front in red did hank going to do something with the front end paint looks awesome great job
Yessir! I didn’t have enough room in the booth to do the tailgate at the same time so I’ll be doing it off camera. I think they will possibly be spraying the core support when they do bushings!
Looks Nice!!
@@vborg001 thank you! for what it is, I think it came out pretty good!
Now you guys got the Bronco to do next
@@JackWebster-cs8hi yes sir!
Happy 🎉 birthday Donny
🎉
Fantastic job
Thank you!
happy birthday don late
🎉
Happy birthday Dony
🎉
Awesome job!! Looks awesome sir
@@JoeyShelby78 thanks man!
One of my favorite years looks great guys 👍🇺🇸
Thanks brother!
Coop this looks fantastic! The twins are so excited with all your hard work. Truck really looks good. Distributor may have wire shorting out, or bad coil.
Great job.
@@rickross8917 thanks man!
Electric tape works great as body bushing in a pinch or hockey pucks
@@stephenphillips4507 I hadn’t heard that before! Lol. Definitely makes sense though!
Awesome job guys! The girls are super excited and absolutely loved how it turned out! Thanks for all your hard work❤Gina
Thank you Mrs. Gina!
Great job guys
Thank you!
That truck looks awesome.You guys get a great job
Thanks man!
I really like how you all are doing to hanks square body truck it is looking really good the girls are going to be really happy with it
Thanks man. They’ll be taking over from here. I think k it’ll look great when they’re done.
@@CoopsHouse you are welcome
My new project is I just gone to scrap yard in the UK got the old Beetle so I've decided I'm taking the whole body frame and I'm going to make it into a a Porsche it will take me quite a while to do as the broker helped me is got married and decided to go on holiday but it's best not to rush take your time and you get it done that's why I say well done to you
I agree 100%. I would much rather take my time and do things right. This one would have came out far better if we had had the time.
Happy birthday Donnie
🎊
Happy birthday
🎉
Cool truck 🚚
🤘🏻🤘🏻
for how he told you he wanted to do this truck it came out great for being a just make it presentable level good job
Thank you brother. I appreciate that
Looking forward to seeing it coop.👍👍👍
@@michael_3985 daaaaannnnggggg you’re here EARLY! Haha. I appreciate you man!
I’m excited to see what’s next so I took the day off. 👍👍👍
@@michael_3985 that’s dedication right there! 😂
❤😊@@CoopsHouse
@@Brad-zh8hh thanks for jumping on!
Nice job coop the truck came out looking sweet
@@MichaelWills-gt8wt thanks brother. Not bad for a rush job!
@@CoopsHouse it looks good to be a rush job as long as the twins and Hank likes it
@@MichaelWills-gt8wt yes sir!
Happy🎉 birthday Donny have🎉 a bless 🎉day🎉
🎉
beuatiful color bleu
Yes sir!
Nice job coop. I agree to not block sand it. It’s going to look good. You put a lot of hours in it anyway. Happy birthday Donny.
@@michael_3985 thank you brother
@@CoopsHouse I have a 1967 SS396 Chevelle almost that same color. But that turned out great.👍👍👍
@@michael_3985 hard to beat the classics!!! I bet it looks great that color!
@@CoopsHouse it does it’s all numbers match and was the color it came with. Thanks for your videos. I’m a car guy so it’s better thanks.lol
Heck yeah! That’s awesome! I appreciate you watching our stuff brother
It’s always good to help others out when it’s a neighbor
Yes sir!
Lets go brothers. Looking good
@@JMRRebuilders 🤘🏻🤘🏻
I got a Cummins that needs a paint job 👀
I know a guy
Time for a flatbed
That would be sick!
@CoopsHouse I luv a old chevy with a flatbed
You guys did a good job. It looks good
Thank you brother
What is your regular job ?
I’m a firefighter paramedic
Coop envy your skills ive tried body work and ahhhhh what a mess had to take it to crash shop to fix my mess😅😅😅
Mate curious Aussie whats your day job are you a panel/paint guy by trade,must be you are clearly good at it .Still not sold on the blue i like BLACK specially on that pickup ,but hey not my Truck😅😅😅
Cheers guys
Kym
Adelaide
Haha. I’m FAR from a professional, but I’m getting there. I can do far better than I did on this one. If you like black, you should check out my squarebody 👀 but no. Lol. I’m not a body guy by trade. I’m a firefighter/paramedic full time.
@@CoopsHouse
As they say thanks for your service mate
Kym
@@kymw7833 haha. I always appreciate you!
BRO FOR STARTER CARBURETOR IS WAY OUT.,THERE''S TOO AIRFLOW MIXERSSCREWS IN FRONT OF CARBURETOR ON BOTH OF THEM TURN THEM ALL THE IN BACK THEM OUT 2 AND A HALF TURN FOR BOTH THAT WILL FIX IT
@@philmcintire8199 thanks man! I’ll give that a shot as soon as I get back around it. It was a brand new one. Just bolted on and haven’t done any adjusting
anyone else see the dent on the passenger door right above the body line
@@chrisbowers852 you, me, and everyone else
nice work!
Appreciate you homie 😎
👏
@@SunsetAcresFarm 🤘🏻
Why didn’t you take the rails off the bed?
@@Simpleman0612 they’re being replaced with bed caps
You guys so really great work, but damn you guys can really talk fast👍👍👍👍
Haha 😂😂😂 I appreciate it man. And sorry about that. Been surviving on caffeine this whole project 😂
👍
@@jameshinkebein6728 thanks for watching!
Why is the passenger door a different color
@@darrinaustin3289 it’s a lighting issue I believe. Doesn’t look like that in person lol
@@CoopsHouse ok I get that
Beautiful job
Yes sir! I appreciate you!
What about the tailgate? The paint job is really good, you do nice work. It's to bad Hank didn't let you spray the red under the hood and inside the bed all black.
Thanks man. As for the tailgate, I’m Working on that. Gonna have to do it off camera
Awesome work as always coop
Thank you brother
How abt spray in bedliner
@@jodycapes3536 they have the plastic insert they will be using
Why wouldn't you spray the backside of the bed? I know you won't see it once the bed is back on but since now it's exposed why not spray it same color??
@@russellcostanzo2685 I was going to, but since I had to respray a few things, we were running low on material
I got ya. Truck looks good I was just curious.
Thanks man! I appreciate you watching
You should have told that old man (Hank) to get with the program that you don’t do things half-assed. Why didn’t he just buy some new bed sides instead of having you do all of that repair and bodywork?
@@bigslim492 😂😂😂 folks sure enough coming after me for it. I wish they’d look at my black squarebody to see proof of what I can do.
It’s a budget build that is gonna be roughed up as a farm truck anyway. They just wanted it pretty much one color
@@CoopsHouseyour work looks good. Anything I’m saying is directed at Hank not you. If he wanted an aerosol overhaul then he should have just had the girls paint it. Good luck.
@@bigslim492 no worries man. I appreciate it
Is he at least going to let you paint the front panel to match? I mean come on.
@@bigslim492 which panel?
Hi Coop. On all Chevy 350 and 400 small block engines the best carburetor is a 600 cfm holly or a 650 cfm 4bbl double pump then that gas engine will come to life
@@greasemonkeyDbpDu1965 thanks man! This is a 600 Holley style brawler. It’s backfiring through the carb so I think there is definitely a timing issue somewhere
You can make custom body mounts out of boat trailer rollers.
I hadn’t thought of that!!!
You shouldn't mix body filler on cardboard it sucks moisture out of the filler and makes it shrink
It wasn’t cardboard. It’s a piece of masking paper to keep it off the metal board. I didn’t know that though!
Why , didn't you take the rails off an why did you not change the tail gate you said you had..
You could watch the video of it’s entirety and hear us “talk about it” and what the plan is on the rails and tail gate
-Hunter, the other guy on this channel
I love old Square body GM debut 1973-1987. But why old power blue of 70's color is ugly sorry can pick better color. Great video keep up good work..
@@derekgilbert2884 that’s what the girls wanted. Thanks Man!
😢😢😂😂😂😊😊😊😊❤
🙌🏻
А изнутри кузов покрасить? Хотя бы в чёрный или серый? 😂
Так можно было ничего не разбирать и не шпаклевать. Просто из баллончика на парковке торгового молла покрасить и всё😂
😂😂😂
You could have taken five minutes and removed those stupid bed rails but oh well.
@@bigslim492 it’s getting bed caps anyway
Well the body and paint job its not all your fault its not right a lot is hanks fault i know me if he told me to rush it and didn't care if it looks good one i would have said i will not video and I would have told hank when you come over your not to do Any videoing way your here if you want a sloppy rush work from me or you can just come and pick up the truck the way it is
I wish more people understood that. I actually did more than I was supposed to. But people tend to overlook the fact that I’ve said that a million times. I could’ve gotten it near perfect if I had been given the time.
Less talking more work and it will get done faster
2 minutes of talking between 6 hours of work didn’t hurt progress, I assure you lol
If you worked as hard as you talk, you could have had that truck done weeks ago. Far to much talking
A few minutes of talking between a few hours of work on our days off from our full time jobs AND running ANOTHER business aside from this didn’t hurt the progress. I promise you.
-Hunter, the other guy on the channel
You need to do more hand work an less talking
@@ronnierigney8867 people come here to see what we’re doing. I’m not putting together videos of time lapses and not explaining what’s going on. That would make for a boring video. Beside, 2 minutes of talking for 6 hours of work isn’t hindering progress at all. I can assure you that.
Happy Birthday Donny
🎉
Happy birthday donny
🎉