Sir, thank you kindly. First video of Binks pressure pots that helped me. All I can say watch plenty of them. You will walk out with alot of tips and tricks.
Louis Jaramillo There’s only one outlet for fluid out to the paint applicator. And one inlet that Pressurizes the pot. There’s also a pressure relief that you can turn that will release the pressure to make it safe for opening
Easiest/shortest demo video I've seen for this unit, thanks!
Sir, thank you kindly. First video of Binks pressure pots that helped me. All I can say watch plenty of them. You will walk out with alot of tips and tricks.
Glad I could help
EXCELLENT DEMONSTRATION !!!! THANK YOU !!
Great explanation. I've been discharging wrong!
Clean and simple 👍
Very useful video,I use those type of pressure pots a lot
Juan carlos España let me know if I can help with anything
I have a question. But first off. Thanks for the video, it helped me out. Theres an outlet that comes out the top. Where does it go
Louis Jaramillo There’s only one outlet for fluid out to the paint applicator. And one inlet that Pressurizes the pot. There’s also a pressure relief that you can turn that will release the pressure to make it safe for opening
Very well explained thank you. 👍
thanks for the tips i got the same unit
Where can I get replacement regulator gauges?
@@KennethPWise let me know what part of the country you are in and I will help you with a local distributor
@@KennethPWise let me know what part of the country you’re in and I will set you up with a local distributor
I'm pushing laytex and I'm getting air in the line. I don't see where it's coming from. Thoughts?
Make sure the lid seal is good and clean. The pressure side shouldn’t exceed 60 lbs.
What is the maximum pressure you push from your air compressor to the pot?
If you have a dual regulated pressure pot as shown in the video, you can bring full line pressure to the pressure pot. 125psi max
Whats the difference between the gray and black hose ?
Gray hoses for air black hose is for fluid
thank you
Why it has to be grounded?
If it’s solvent-based pain and you create a static charge you could ignite the paint. Good practice to ground everything in the paint area
Wow idk if you’ll believe this but mine is way fancier