Inner Bearing Puller Tool, How to use, Beam Needle Bearing Removal, VW Beetle VW Bus Type3 Bug Split
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2020
- includHow to use a Bearing Puller Tool.
How I easily remove the needle bearings from my VW Beetle front beam, tho relevant for wheel bearings, suspension bearings for VW Bus, Type3 suspension etc too. :)
UPDATE 01/07/20
Please note I have since found the bearing in my beam to be of a non standard size. While I don't think it will have any difference to how the tool works though I cannot confirm it will definitely work as per the video with a standard beam and needle bearing. I'm waiting for confirmation and will update accordingly. I've added the links below as someone asked where I got my tool.
INNER BEARING BEARING PULLER
EBAY.UK (*.COM search BELOW)
ebay.us/zEMf1d
Least expensive I could find in UK:
ebay.us/D4JJPX
EBAY.COM:
search
ebay.us/WZGrWA
If you would like to support PeoplesCar via patreon please click here, thank you:
/ peoplescar
PeoplesCar Merch T-Shirts, Hoodies, Mugs, Stickers, Prints etc
1) CHOOSE YOUR DESIGN
2) CHOOSE YOUR PRODUCT
www.redbubble.com/people/EDAD...
(my hoody is small fitting so I'd order a size up)
Many Thanks :) - แนวปฏิบัติและการใช้ชีวิต
We are bearing puller manufacturer in China and focus on export wholesale. I think this video is very good! It teach many people how to use bearing puller. 👍👍
Thank you 👍
Great video. Very straightforward. Thanks for making it.
No problem glad you found it useful. Thanks for the kind words 🙂👍
Thanks alot!!!! I was using mine wrong!! Worked like a charm!!
First time I tried using mine I was using it wrong. Wasn't till I stopped to look at it I realised what was doing wrong :) Easy done. Glad you found it useful :)
Excellent video. Very helpful indeed. Thank you 👏👏👍😀
My pleasure tx for watching 😊👍
Great video thanks for sharing!
My pleasure Tx 🙂👍
Thanks much mate!
No probs, glad you found it helpful 🙂👍
Nice 👍
Thanks 🙂👍
Thanks
My pleasure 🙂👍
Thanks for the vid. Those pullers are only £10 on ebay 👍🏻. I'm just about to weld some new towers myself. Mind me asking whether you had to redo the seat for your bearings after you welded on your custom towers? I've not gone as close to the end as you, but set in about 10mm.
Hi tx :) I didn't actually build the beam it was an ebay purchase. I've done more vids where you might be able to see what you need here etc th-cam.com/video/0l0Si-s2kMc/w-d-xo.html but unfortunately I can't help answer your query through experience sorry. Good luck :)
😎
Tx 🙂👍
$30 on amazon for those of you wondering.
I'm sure mine was less than £10 so like $15 USD. Was a while ago now tho. Tx for the feedback 🙂👍
I got mine on Amazon $18.99 I think. Not a huge difference, except when tight on money.
What is the smallest bearing ID (internal diameter) that this puller would fit? The items on eBay show all the other measurements, except the diameter if the jaws that fit through the ball bearing. And contacting the sellers has not worked so far (they normally don't have the items themselves, they get shipped directly from a warehouse).
The end of the fingers on mine measure about 12mm fat, so should be good with about 1'' / 25mm ID. They are quite rough cast items however so may vary, and I guess could be 'modified' slightly if needed. GL :)
@@PeoplesCar Thank you for the additional info. I was not sure how to interpret the item description on eBay: it said "Range of application: 14-38mm", but also "Pull range: 50-95mm", and the statement "sleeve-type bearings with 1/2"-2" inside diameter". Apparently the tool would not fit into a 1/2 hole, then.
@@TheICTBob That does seem odd if it's the same puller. Are you sure it's not a smaller one?
I'm not entirely sure the other measurements make sense either I'd have to sit down with the puller and a tape measure to try and figure those out lol. I assume it shouldn't be used to pull with just 1 finger?? as that's the only way the one I have would go through a half inch hole.
This is just what I was preparing to ask 👍 I want to remove bearings with an inside diameter of 15mm so thought I was going to be alright either way with this but just watching the video plus your answer I think not... hmmm. The listing you link to does describe all the same specs so obviously they're inaccurate. Another question I'd like to ask. With the legs fully closed, how close can the side supports be brought together before they hit the central tripod hinge or top of the legs? I have a very narrow ledge not much wider than the outside race of the bearing itself. Looks like you can put 1 support between 2 legs and the other braced up against the third. If you could tell me that measurement I'd appreciate it. Possibly they could be angled slightly as the tension increases/ removal begins? Thank you, both.
Sip
Whats that? Tx 🙂
Where can i get this tool to buy.
Just updating the description with this, please note I found the bearing to be non standard in my beam. I dont think it will make any difference to how the tool works but am slightly worried it maybe less effective with stock beam and bearings, this is information I'm trying to find out and will update accordingly, hope that helps :)
"Please note I have since found the bearing in my beam to be of a non standard size. While I dont think it will have any difference to how the tool works I cannot confirm it will definitely work as per the video with a standard beam and needle bearing.
UK EBAY
I imagine any of these pullers would work but have only tried the 3 finger type:
rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5575557847&toolid=10001&campid=5338637766&customid=&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp2380057.m570.l1313.TR5.TRC2.A0.H0.Xinner%2Bbearing%2Bpuller.TRS0%26_nkw%3Dinner%2Bbearing%2Bpuller%26_sacat%3D0
Here is a link to the exact item/seller I purchased mine from:
rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5575557847&toolid=10001&campid=5338637766&customid=&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FCarbon-Steel-3-jaw-Inner-Bearing-Puller-Gear-Extractor-Heavy-Duty-Auto-Tool%2F203019318000%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
EBAY USA:
rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575557847&toolid=10001&campid=5338637766&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp2380057.m570.l1312.R1.TR11.TRC2.A0.H0.Xinner.TRS1%26_nkw%3Dinner%2Bbearing%2Bpuller%26_sacat%3D0"
Khaa mile yesa pular
Usa la'ī tuhāḍā dhanavāda, lika apaḍēṭa kītē ga'ē hana. Maiṁ āpaṇē dūjē vīḍī'ō dī bihatara jān̄ca karāṁ! Dubārā dhanavāda 😊👍
Where can Buy this tool ??
Really sorry I never saw your question. It came from ebay. Was very cheap. There is a link in the video description too :)