That's condensation as we are located 1 mile from the beach. what you see dripping is from the gasket as it takes longer than 10 Seconds for it to take its new shape after being squished.
Awesome product but as I work in the marine industry I know that heat shrink doesnt in fact make a water tight seal but can cause more damage by trapping water inside. I would suggest useing self amalgamating tape, this will give you a perfect seal protecting the connection from the elements.
Thanks to Jojo GRANATELLI for this video, really good Job. I installed since 2 days 302525 Granatelli CUT OUT on my Nissan TITAN 04, just perfect. Very Hight quality, Good sound, very simple to install with this video. I recommend GRANATELLI MOTOR SPORTS. Dimitri to FRANCE
@@thepro4x362 No problem with electronics parts and no problem with wet road. This cut out works well. I use it since one years now. I drive 100 kms per days I open it every days. I hope it help you.
Looks like finally someone made a decent set of valves. What is the warranty on your system? Do you have a control box set up for dual exhaust systems? Thanks Sid
Wow...! This is very cool... I just recently purchased a Black C4 1995 Vette super clean ... bone stock never seen rain or snow with 87k.. would this work? I guess I would need 2 of these applications?
So let’s talk about finding a spot for this set up. The motor looks small but everything together is really big and you gonna need a lot of space. First check under your car for space and plan out everything. I literally had to hammer in the floor to fit in this as this mfkin set up is huge and hopefully it doesn’t fail like others as I paid $350+ for this but I’ll update u guys.
Do you get the same size as your pipe or .25 inches bigger? Like will the 2.25 in size fit perfectly or should I get 2.5 inch for it to slide on top of factory pipes
You guys should make a 2 inch pipe version for the other misc. cars that aren't gm ford or chevy, it would help probably a lot of people out, I'd buy this thing in a hurry if there was a kit that fit my car.
Every car is different. But we recommend wiring it up to a KEY HOT wire so you don't drain the battery as it could put a small drain on the batter over time if you do a direct hook to the battery
All our kits have the instruction how to make 2 brains work off one switch. If you cant find it you can always call in. 805-486-6644 You will need to cut the one switch wires off the back and stripe and connect them to the other switch we give you the clips to crimp the wires to the switch. Or You can always upgrade to the wireless remote all you do is plug in and play Part number 303510R-D
@@GranatelliMotorSports any recent codes? I called today and you’re out of the 3”, but you had 1 left of the 2.5”..... I dont really want a 2.5 “.... but a nice promo code would definitely influence me. ☺️
What if you bypassed the switch and gave full open/closed through tbe control box constant 12volts? Would that end up damaging it over time? I'm looking at getting this for my dodge charger a linking them to my sport mode feature.
So I brought this about three months ago now I’m constantly recently hearing a rattle from inside, I believe it’s coming from the flat any idea? What to do with this situation?
@@GranatelliMotorSports yeah so I laid under the car and it looks like the flats are moving inside of them making rattling noise. If I put my finger on it they don’t move as soon as I remove my finger you can hear the rattle, so the flap is not completely closed.
Seals 👍 great! When our valve shuts, it mates to a landing seal on before sides of the blade. We don't market them as water or air tight but they are as close as you can get
I just went to your website to order this but it does not appear that the slip fit exhaust connectors are included in the package? Are these not shown or are they purchased separately?
So my question is, when the cutout is activated, it does not block off the muffler section so exaust will be released from the cutout and muffler this has me mind boggled because wouldn't you get way more sound if all of the exaust is being released from cutout alone not throght the intersection of both?
you know, with x amount of fabrication. .. buy 2 of those and get the valve junk from the second one welded in the straight section behind that y so it'd make a block plate when closed. the exhaust would all go out the open end. murphys law to that is .. if you have both of the closed at the same time something not good is bound to happen
Where is the install steps on how to wire? Video completely skips this part. Don’t know why 95% of videos on TH-cam are half done and leave out steps in process, very frustrating.
Every car and truck is different. that is why we didn't show that part. Our kit is simple to wire up. You can always connect straight to the battery or wire it to key hot under the steering wheel
When we made the video, we were simply explaining the concept and what makes.oura unique and therefore best. WIRING is simple😊. It's power and ground. We recommend key hot. The only other connection is plug and play. Our website has detailed instructions as well. Sorry for any confusion
I've had this on the car for about 1k miles. It's starting to not hold the close position well anymore. When closed it's fine on idle but as soon as I get on throttle it starts rattling.
Hi. greetings I am interested in this article because all those that I have looked for all are welded with autogena and the installation that you make is very easy I do not want to weld anything. You could give me more information about the article if you sell it or where I buy it, it really hurts me. the measure would be 2.5. I am from mexico
This system will work great for you. NO WELD REQUIRED. Call 1-805-486-6644 Monday -Friday 8-5 PST part# 307525 2.5" (63mm) Electronic Exhaust Cutout System SINGLE SYSTEM
There is another video that shows you can install the standard switch instead of this full open/close auto shut-off switch (smart box). It makes their system like all the other systems that you have to manually control the open/close by holding the switch in the correct position. I would think if you want the best of both worlds, install the switches in parallel so that you can bypass either one when you choose to do so. Here is the link to that other video: th-cam.com/video/_wQv0tfu4DU/w-d-xo.html
We offer that option but as shipped its OPEN or closed. You will find that opening half way sounds the same as wide open - its just better for the valve to be opened or closed all the way
Dear joe I'm sorry to be bothering you like this but I've gone through every channel possible all American Muscle LMR late model restoration I talked to almost everybody you can imagine and when you first speak to someone that get you all excited that they may be willing or may be able to help I've tried to Make A Wish Foundation what they say that my brothers too old my brother is 49 and it's been diagnosed with a rare genetic disorder that makes his blood mutate and causes him a lot of health problems he's been a Mustang on almost to the whole life in his last wishes that he owns one more one last time so the church got together and got him a 2004 Mustang GT all they could do we go to a relatively small Church we wanted to do a coyote swap and give it just a little muscle nothing major maybe a 2012 coyote gen 3 with an automatic transmission in a air ride for adjustable suspension he's having a lot of trouble getting in and out of cars now and I'm afraid wrong timeline that's not going to be doable when we first started this project two years ago everyone Farris hope and he had so much out of but now I didn't disbelieve and we don't know who else to talk to or who else to turn to for help it's just one man's dream the only one of the best cars ever made a Mustang candy apple red what's a nice sound in motor stage 2 cams when do someone's come out with a supercharger that you'll actually tune I think it's Paxton and it has three different setups which mic should I do for someone we just want to enjoy that ride they won't see attract or strip he just wants to go to car shows because the owner of the Mustang one last time if there's any way you could help us or anyone you know that could help us we would greatly appreciate it we're out of options at this time we know Turn 5 is a big player in American Muscle and we really had hopes for them but was that they came back with was it was just not a project that they would be interested in what's killed his spirit and I think he's giving up but I'm not willing to if you can help us in any way please do you can contact me at 334-2221 2964 that's my cell phone or my email jody14u2c@yahoo.com....please help us
I just installed this one yesterday on my 19 ram classic 1500 hemi and at idle it sounds like a POS car with no muffle kinda like a boat!!! It only sounds good when ur going fast .. I’m really pissed off .. do not recommend at all..
Awesome ................ were is all the water that is dripping leaking from ?
That's condensation as we are located 1 mile from the beach. what you see dripping is from the gasket as it takes longer than 10 Seconds for it to take its new shape after being squished.
Awesome product but as I work in the marine industry I know that heat shrink doesnt in fact make a water tight seal but can cause more damage by trapping water inside. I would suggest useing self amalgamating tape, this will give you a perfect seal protecting the connection from the elements.
Thank you
We are not looking for water tight - just not to be pulled apart under tension
Marine heat shrink actually would make it watertight... It's basically lined inside with hot glue so that it becomes a solid encapsulation.
Is better running that plug inside and under the carpet
Sold.
Thanks to Jojo GRANATELLI for this video, really good Job. I installed since 2 days 302525 Granatelli CUT OUT on my Nissan TITAN 04, just perfect. Very Hight quality, Good sound, very simple to install with this video. I recommend GRANATELLI MOTOR SPORTS. Dimitri to FRANCE
Question: How long did the electronics last or how are they with wet roads
@@thepro4x362 No problem with electronics parts and no problem with wet road. This cut out works well. I use it since one years now. I drive 100 kms per days I open it every days. I hope it help you.
Just purchased this unit 4 days ago, gonna wire it up this afternoon
Was it hard to install
Looks nice.. how much$$ for dual 2” system?
When it got to like 11 minutes I taught this guy not gonna show us a sound test lol
The system does not require an extra relay. There is no reason to block off the muffler - it always takes the path of least resistance
Looks like finally someone made a decent set of valves.
What is the warranty on your system? Do you have a control box set up for dual exhaust systems?
Thanks Sid
1 year limited warranty and the Switch provided will run both cutouts
Thank you
YES - the dual system has the correct box controller
Wow...! This is very cool... I just recently purchased a Black C4 1995 Vette super clean ... bone stock never seen rain or snow with 87k.. would this work? I guess I would need 2 of these applications?
Oval is what you are looking for Call in this week and save 20% off ask for JOJO
805-486-6644
So let’s talk about finding a spot for this set up. The motor looks small but everything together is really big and you gonna need a lot of space. First check under your car for space and plan out everything. I literally had to hammer in the floor to fit in this as this mfkin set up is huge and hopefully it doesn’t fail like others as I paid $350+ for this but I’ll update u guys.
If your limited on space go with the oval kit total length can be a short as 4 inches
805-486-6644
Do you sell a kit that would fit with a 2.25in exhaust?
302522 or 302522d
Is it possible to still wire in a relay with this "brain" included in the circuit?
Yes you can do that
It includes a circuit board that carries the load. Its rough .2 amps (point-2) But yes you can install a relay - i would not
One of my two cutouts stopped working 6months later, I’m trying to find out if it’s wiring/connection right now
GIVE US A CALL 805-486-6644
.
How about a set-up for a porsche cayenne 2011 S . I believe it's a duel 2.5" tipe. so i would need two. thx for the video
We have installed on your vehicle before
Do you get the same size as your pipe or .25 inches bigger? Like will the 2.25 in size fit perfectly or should I get 2.5 inch for it to slide on top of factory pipes
We offer both slip fit design 0:00 or weld in. Separate part numbers. Just let us know when you order. Don't order oversized pipes
You guys should make a 2 inch pipe version for the other misc. cars that aren't gm ford or chevy, it would help probably a lot of people out, I'd buy this thing in a hurry if there was a kit that fit my car.
We currently only have 2.25 in stock
Done. In stock
There is a lot of water leaking out; it appears to be coming out of that gasket.
Do you guys have a wiring installation video?
Every car is different. But we recommend wiring it up to a KEY HOT wire so you don't drain the battery as it could put a small drain on the batter over time if you do a direct hook to the battery
@@GranatelliMotorSports Thank you, ended up taking it to a stereo system shop they did the wiring job👍🏻
I wanted to ask does it do any damage to the car in the long run?
No as this is an after the cats system
No.😊
So how do you wire all this and how do you wire 2 cutouts to one switch
All our kits have the instruction how to make 2 brains work off one switch. If you cant find it you can always call in. 805-486-6644
You will need to cut the one switch wires off the back and stripe and connect them to the other switch we give you the clips to crimp the wires to the switch.
Or
You can always upgrade to the wireless remote all you do is plug in and play Part number 303510R-D
@@GranatelliMotorSports I’ll probably just upgrade to the wireless switch thanks I had no idea you guys offered one
This looks Quality and affordable, Do you have any promo codes?
GMS10 will get you free Shipping AND 18% off this month
@@GranatelliMotorSports any recent codes? I called today and you’re out of the 3”, but you had 1 left of the 2.5”..... I dont really want a 2.5 “.... but a nice promo code would definitely influence me. ☺️
@@daviddenman7479 we will have everything back in stock may first
promo code GMS10
I actually want to try it out. 😁👍🏻
WWW. GRANATELIMOTORSPORTS.COM
@GranatelliMotorSports can this be wired to a switch panel like switch pro or auxbeam?
Hi I am an Indian I want this full set Can I buy a full set anyway? What a rate. Can they sell me any of this through the Corriere Service?
The muffler on my 1996 chevy c1500 measures 2 5/8 will the 2.5 kit work
yes
What if you bypassed the switch and gave full open/closed through tbe control box constant 12volts? Would that end up damaging it over time? I'm looking at getting this for my dodge charger a linking them to my sport mode feature.
I would recommend our oval set up
we have never wired it like that
@@GranatelliMotorSports Is there a contact number I can call to explaim exactly what I was planning doing, to see what product would fit my needs?
@@fireboygamer 805-486-6644 JOJO
This can be shipped to switzerland?
YES, YOU CAN ORDER IT OFF MY WEBSITE AND IT WILL SHIP TO YOU
Does this impact performance at all
Hi, Would these work on 2004 Corvette c5 automatic?
I recommend the oval cutouts as your car is limited on space
313530k
cách chế pô điện rất hay và thuận tiện ,cảm ơn bạn hướng dẫn
Can I open/close them while the car is in motion?
YES
Can this be welded completely?
Yes. We most of the time will install the slip fit and weld it in
So I brought this about three months ago now I’m constantly recently hearing a rattle from inside, I believe it’s coming from the flat any idea? What to do with this situation?
@@re9473 Please call us and we can help you with this. It could be a relearn process is or a screw needs to be tightened
@@GranatelliMotorSports yeah so I laid under the car and it looks like the flats are moving inside of them making rattling noise. If I put my finger on it they don’t move as soon as I remove my finger you can hear the rattle, so the flap is not completely closed.
@@re9473 Make sure that the allens that hold the butterfly shaft to the motor are tight
Not bad comrade!
Could the unit handle being fully submerged?
yes
It could be. But that is not the design application
Mine is stuck open how do I fix this so I don't have to take it out
You got any to fit a 2017 Jeep Grand Cherokee SRT?
All our kits are Universal. For your application i would recommend 313530D
Hi, do you get much custom from the UK ? 😉🏴🇬🇧 Great design Joe.. 👏
yeah, but how good does the
actual valve itself seal????
thanks
Seals 👍 great! When our valve shuts, it mates to a landing seal on before sides of the blade. We don't market them as water or air tight but they are as close as you can get
I just went to your website to order this but it does not appear that the slip fit exhaust connectors are included in the package? Are these not shown or are they purchased separately?
We have updated out website everything will be up
What’s the part number for a 2013 Ford Raptor?
What’s keeping those bolts on the that valve from eventually falling out and the flap not working anymore?
After we RED locktight them in we smash the back of the bolts so they can NEVER come out.
whats the best way to measure the diameter of the exhaust to know it'll fit, cheers
the outer diameter of the pipe. if you are running stock exhaust you can always call in and we can help you out to get the fitting set for you
ruler?
So my question is, when the cutout is activated, it does not block off the muffler section so exaust will be released from the cutout and muffler this has me mind boggled because wouldn't you get way more sound if all of the exaust is being released from cutout alone not throght the intersection of both?
Yes, Not 100% of the exhaust will come out of the cutouts but like anything in life it will always try to take the easy way out of your pipe
you know, with x amount of fabrication. .. buy 2 of those and get the valve junk from the second one welded in the straight section behind that y so it'd make a block plate when closed. the exhaust would all go out the open end.
murphys law to that is .. if you have both of the closed at the same time something not good is bound to happen
When I installed mine, the butterfly is the other way around the opposite side. Is that fine?
Can I put it on my 08 f150
Yes any car or truck
Where is the install steps on how to wire? Video completely skips this part. Don’t know why 95% of videos on TH-cam are half done and leave out steps in process, very frustrating.
Every car and truck is different. that is why we didn't show that part. Our kit is simple to wire up. You can always connect straight to the battery or wire it to key hot under the steering wheel
When we made the video, we were simply explaining the concept and what makes.oura unique and therefore best. WIRING is simple😊. It's power and ground. We recommend key hot. The only other connection is plug and play. Our website has detailed instructions as well. Sorry for any confusion
I've had this on the car for about 1k miles. It's starting to not hold the close position well anymore. When closed it's fine on idle but as soon as I get on throttle it starts rattling.
If you have not called in yet please do and we will help you out
805-486-6644
JUst call in. That is the first we have heard of that. It sounds like a harmonic issue
Do you have to stop the switch? Or does it stop itself?
auto stops
Can this unit be installed infrot of the resonator?
yes but it HAS TO BE AFTER THE CATS
Do you have this available for a 2016 Chevy Impala?
Yes please call in 805-486-6644
Can they be welded?
Yes we have a weld in kit
How does it get power? Is it connected to the car battery?
yes
What is the measurement from end to end with the clamps installed?
13 Inches
9" inches
What do I do with the small nuts and pressure washer things
We include that hardware for guys not using our threaded v band adapter
???
Hi. greetings I am interested in this article because all those that I have looked for all are welded with autogena and the installation that you make is very easy I do not want to weld anything. You could give me more information about the article if you sell it or where I buy it, it really hurts me. the measure would be 2.5. I am from mexico
This system will work great for you. NO WELD REQUIRED.
Call 1-805-486-6644 Monday -Friday 8-5 PST
part# 307525 2.5" (63mm) Electronic Exhaust Cutout System SINGLE SYSTEM
Can I open at high rpm ?
Yes you can open at high rpm
The switch is included. However if you want it on an RPM activated switch that works at higher RPM's you could do that
Naif M يمديك ايه 😂😂😂
So it's not adjustable? I can't just open it a crack if I want?
There is another video that shows you can install the standard switch instead of this full open/close auto shut-off switch (smart box). It makes their system like all the other systems that you have to manually control the open/close by holding the switch in the correct position. I would think if you want the best of both worlds, install the switches in parallel so that you can bypass either one when you choose to do so. Here is the link to that other video: th-cam.com/video/_wQv0tfu4DU/w-d-xo.html
We offer that option but as shipped its OPEN or closed. You will find that opening half way sounds the same as wide open - its just better for the valve to be opened or closed all the way
What power source should i tap into or which fuse?
Any wire the is key hot so you don't drain the battery if you let the car sit for more then 2 weeks
@@GranatelliMotorSports when you say key you mean ignition key?
@@Edgar-and-Wrench yes
How did you get it with those clamps and flared ends? All I've found from granatelli needs to be welded in place
Here is a link to the website look near the bottom as you will find all the slip fit kits
granatellimotorsports.com/p-35854-exhaust-cutouts.html
@@GranatelliMotorSports where can i find those long clamps? The kit i want has the small clamps, but id like those long clamps if thats possible.
How to order online? How much will it cost?
Granatellimotorsports.com
Where can I buy this kit
Granatellimotorsports.com
What were those leaks
What
Condensation from the exhaust. Not a big deal. Same thing that comes out of your normal exhaust tailpipe.
Elijah Salaam บ้านเรามีใครเอามาขายไหมครับ
Hi, good day, i'm interested in this article,,
I'm in South Africa, how can I buy and where can I buy... Pls help
Call 1-805-486-6644 Monday -Friday 8-5 PST
or
go to Granatellimotorsports.com and you can order from there
www.granatellimotorsports.com/products/3_0_76_mm_Electronic_Exhaust_Cutout_System-3084-583.html
@reece that is not the slip fit version
@@whatwasthatonething3363 at this time we don't have that on our web page but all our vendors have them on there web pages
Does it leak when is close?
Nope
Where is the motor made?
California
U need hair cut joe ! 😂
Price ?
depending on size and materiel the prices change
Is that possible for auto diesel ? Tank u
Yes we make it in 3 inch and 4 inch at this time. It will have to go behind the DPF system about 8 inches. For temperature reasons
SOON COMING IN 5 INCH
Where u guys located
We are located in the Oxnard area
Mileage?
Why?
@@gpdude22 lmao
Is this legal ?
yes as long as it is behind the CATS
Is this increase the hp or just for louder sound?
Jp-#9 wine country jp I’m pretty sure you’re horses go up by 5
Yes legal
No, it is not... but who cares, the sound is awesome! 🤣
where can i buy it?
GranatelliMotorsports.com
or call 805-486-6644
On AliExpress :D
Dear joe I'm sorry to be bothering you like this but I've gone through every channel possible all American Muscle LMR late model restoration I talked to almost everybody you can imagine and when you first speak to someone that get you all excited that they may be willing or may be able to help I've tried to Make A Wish Foundation what they say that my brothers too old my brother is 49 and it's been diagnosed with a rare genetic disorder that makes his blood mutate and causes him a lot of health problems he's been a Mustang on almost to the whole life in his last wishes that he owns one more one last time so the church got together and got him a 2004 Mustang GT all they could do we go to a relatively small Church we wanted to do a coyote swap and give it just a little muscle nothing major maybe a 2012 coyote gen 3 with an automatic transmission in a air ride for adjustable suspension he's having a lot of trouble getting in and out of cars now and I'm afraid wrong timeline that's not going to be doable when we first started this project two years ago everyone Farris hope and he had so much out of but now I didn't disbelieve and we don't know who else to talk to or who else to turn to for help it's just one man's dream the only one of the best cars ever made a Mustang candy apple red what's a nice sound in motor stage 2 cams when do someone's come out with a supercharger that you'll actually tune I think it's Paxton and it has three different setups which mic should I do for someone we just want to enjoy that ride they won't see attract or strip he just wants to go to car shows because the owner of the Mustang one last time if there's any way you could help us or anyone you know that could help us we would greatly appreciate it we're out of options at this time we know Turn 5 is a big player in American Muscle and we really had hopes for them but was that they came back with was it was just not a project that they would be interested in what's killed his spirit and I think he's giving up but I'm not willing to if you can help us in any way please do you can contact me at 334-2221 2964 that's my cell phone or my email jody14u2c@yahoo.com....please help us
"a perfect seal" as im watching it leak
Leak where?
I just installed this one yesterday on my 19 ram classic 1500 hemi and at idle it sounds like a POS car with no muffle kinda like a boat!!! It only sounds good when ur going fast .. I’m really pissed off .. do not recommend at all..
Where did you install it in the flow path. Normally it's the Dodge guys that are super.happy
talk too much
No such thing - turn the volume down :-)
can i wire in a different switch to match my dash better?
Of course